I have been able to successfully edit some text colors, but there seems to be one page that wont change the text color. Inside the users/ folder, the login.asp page, i cant seem to change the text color from ffffff to 000000 so it can be read on my background color. Every page in the script is correct but this one.

Thanks.

Hello,

You are correct regarding what you noticed.. ASPBanner only allows one person to administrate. If if did what you are asking about it would probably cost more.
(you get the ASP source so if you really wanted that you could always add it on your own fairly easily, but it all depends on your skills)

AS for keyword advertising and different ads based on certain pages ASPBanner does not get into that. The main reason being performance as I built ASPBanner primarily as a performance banner rotation solution.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=144& ; ; ; ; ;PN=1

Like that thread says, you could make different zones for different conditions.. then surround the banner calling code with if else logic so a different banner zone was called under certain conditions.

Regardless, if you really need something that has every bell and whistle. BanManPro is where it is at.

Sounds to me like you got some bad databases or something. Or your trying to open a database with too old of a version of msaccess.. not sure

Everything is stored in one database. And yes there is more than just the users table.

Also,  removing the "temp" password should be a piece of cake.

Email me for a new copy of the download file ? Use the contact from on the cjwsoft site. Please tell me your order details as well so I know who you are.

MSACCESS 2000

server: windows

option pack: yes (after the install I have this problems with groups and edit users )

host permissions: yes

MESSAGGE:
Active Server Pages error 'ASP0113' Script time out/password_admin/groups.asp The maximum amount of the time for a script to execute was exceeded. ...

This first one may be an obvious one, but is it only .asp files that I can protect as in no HTML files.

Can the program be set to protect my whole https directory contents (though the answer to the last question may have bearing here - there are html files as well as .asp in there) as in http://secure.mydomain.com

Thanks in advance

Nov 2005

I getting a strange error with ASPProtect.

 Microsoft OLE DB Provider for SQL Server error '80040e14'

Unclosed quotation mark before the character string '¾_^Ö'.

/aspprotect/check_user_inc.asp, line 114

If I check the database directly "¾_^Ö" is the exact string for the password.

Any Ideas

Thank you....  yes it does

Is there a limit in the number of Zones you can have in the database.

thanking you

like I said... you would have to modify the code
(and really I dont think it is possible, how could it be when images uploaded are of all shapes and sizes)

How are pictures of various shapes and size going to resized to a fixed width and height without distortion on either a horizontal or vertical level ? Uness the image uploaded matches the fixed thumbnail ratio you have set there is going to be distortion.

There is no component that is going to make it any easier. You are already using an image resizing component.

I give you two options the way the code ships.

fixed width and height for thumbnails

or

fixed width / dynamic height for thumbnails

The only other possible option would be

fixed height / dynamic width for thumbnails

and that you would have to code on your own because that option is not there

The last thing I will say is this. Sorry, but I do not support custimizations to the code. It's just not easy to explain. Its a lot of code work. Its a lot of time.

  Hi, we purched ASP Protect a few months back and had it installed on our hosting company under a "temporary" domain name -- cidrasensors.com

We are now about ready to switch this development site over to production and I need to change the domain from cidrasensors.com to cidra.com

My hosting company wants us to create a new accounting and re-set everyting up.

So...based on this, I have a few questions for you:

1. Do I need to re-install the software? or can I copy from one account to the other?

2. Assuming I can copy the software to the new account - are there changes that will need to be made to point to the new domain?

3. If I decide I wanted to keep the first account alive for development purposes (never turn on the website domain to the public) - would I need to have a seperate ASP Protect license? 

4. If I decided to ask you to do the transfer for us - is that covered in the $20 Installation fee I saw on the web?  

humm, those are some very big images to be starting off with but I am not sure that would cause a problem under the importing scenario

what width are you having the system resize them to ?

What happens when you upload a image manually (one a t a time)

Also, try the import process out with some pictures no bigger than say 1024 and lets see what happens

Sorry Chris,

It didn't fix it.  Looks like I had the current code.  I bought the system in mid-April.  The version says 3-10-2005.

I do know that in the database, the password shows as " éG"  but in the error code, it shows as " éG".  The square character is missing. 

Thanks,
Mick

Edit: well heck.  It skips the square box here too.  The password in the database puts a square box in front of the éG

I have activated both activity and log files. The directories exist on my server and don't give any errors.

When I check the activity tab, some times there are a number of items in it.  Other times, there is only my login info.  From what I can see, it is supposed to show the last 50 items of activity at all times.  Am I missing something?

Also, when I click on the log file tab, there is no file or information to see.  Is there something I need to do beyond activating it in the settings area and making sure the directory has write permissions?

Thanks.

How can i get to this to register someone in the database only after the Paypal payment has been accepted.  I was testing it out to see if it makes it to my Paypal account (which it did just fine) then I closed Paypal before paying.  I logged in as the administrator and looked at the member list and the account was created anyway.  How can I stop this from being created until "only" after the Paypal payment has been "approved"?

What if this person never comes back to "try again"? Now the username he used (and is inactive) is not available for anyone else to use.  And it takes up database space.

I am using the Paypal (non-subscription)

Thanks in advance,
scottyFlasher

how you connecting... lets see the connection string...

could be permissions related too.. if they are not set correctly
(always give them to the folder, never just the mdb file)

Some of this might help...

http://support.cjwsoft.com/code/moreinfo11-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

you may want to download some of the different versions of the access database from the support area and try connecting to them as you may have older odbc drivers on the server

You may also want to try to get ASPTest from our website working before you go any further

Hello

I have a strange problem with the thumbnails in the ASPClassifieds.
If i upload some pictures in an ad, the 2nd picture always shows with an x, as the picture doesn´t exists. But if i click on the 2nd thumbnail, the picture shows okay. I haven´t changed enything from the original code.
Does anyone have any idea, where it goes wrong ?

With best regards, Erling Larsen

enjoy the bar.. drink one for me.. cause that was the problem..

Same here.  Thinking it might be server load or the bandwidth to the server.

Thanks for checking!
Lance

The redirection at 1st login feature is supposed to work like I explain in this thread.

http://support.cjwsoft.com/code/moreinfo385-1.htm

Though what you just said is a bit confusing it sounds like you have some sort of browser problem and it is doing the redirect every single time. ?

I would suggest reseting all your browser settings to normal and making sure cookies are enabled because forms based authentication uses session variables and cookies must be enabled for session variables to work correctly. If not something like this could happen as the redirection at 1st login would happen over and over every time.

So try it on other computers and try with firefox as well as IE. Many people go nuts with their browser settings and way too much stuff blocked which can cuse all sorts of issues. Also some script blocking and firewall software can cause problems so disable all of that when testing.

You may also have created some sort of endless loop. (I really need to know way more information on what you did to know that for sure)

You may also want to consider doing your redirects manually meaning you protect a a page and right after the protection you use regular ASP redirect statements to redirect the user whevever you like based on their session info which is available to easily check immediatly after someone gets through the authentication.

I still stand behind my statements that redirection is not good site design. You really really need to understand and plan your ASP pages as well as have a very good understanding of the session and how all of that works if you use redirection with a password authentication scenario. You should never be redirecting someone to an ".htm" pages except during testing because you wont be able to stop users who are not supposed to go there from going there directly.

Protecting ASP Pages

To protect a page without using the Access_Level or Groups feature simply add this code to the top of that page.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in.

An example of doing this is provided in the "default.asp" file included in the root of the Password System.
Look at the source code with a text editor to see the working code. It is quite simple.

 Protecting ASP Pages Using Access Levels

To protect a page using the Access Level feature simply add this code to the top of that page.
You simply specify the Access Level before the include file is called. In this example we are protecting the page with Access Level 4.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in as a Level 4 user.

Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System.
Look at the source code of the ASP pages in that folder with a text editor to see the working code. Again, It is quite simple to follow.

Protecting ASP Pages Using Groups

Please see the code generators in the admin are for the code to do that.

I would check out this article for starters... aspprotect is very similar to asp photo gallery and so are a lot of the page names.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=49& PN=1

Jeromy, You should have access to that page.

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

If things are not perfect there will be no log files and no errors.. it can only be one of these things really
http://support.cjwsoft.com/code/moreinfo313-2.htm

You may also want to make your the filesystem on the server is working and not disabled by norton script blocking or anything random like that. Testing the filesystem object is best done by writing a simple text file to a folder. Plenty of examples of doing that can be found at www.aspin.com

Recent activity is temporary and admin activity in the admin area is not tracked. If your application in IIS has reset or there has been no activity in the users area or in pages you protected there will be nothing there. The busier your site the more chance something will be there. For example usually our online demo has something there except right after 4am when my server does an iisreset.