At one point I was using CDONTS_Installed but since I moved to a new Windows 2003 server I was told by my ISP that either one of these will work

Our webhost changed converted all sites from c: to d:, and without us doing anything else, our customers now get the following error message when trying to access our Classifieds site:

***********

Microsoft][ODBC Microsoft Access Driver] Not a valid password.

This means there is most likely a problem with the "ConnectionString" info that you specified.

If you are using a DSN-Less Connection with MSACCESS.

Check that the physical path to the database has been specified correctly.
It has to be perfect and correct. It cannot be specified using "http://" or by using "server.mappath".
It has to be specified like the following example.

ConnectionString = "DBQ=D:\Inetpub\wwwroot\advpass_pro\_database\passwords.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=admin;PASSWORD=Xpass"

If this is running on an NT server or Win2000 Server make sure that permissions have been set on the database.
Only the server admins can do this. If you are not the admin you will have to ask for this to be done.

If you are using a System DSN

It is not set up correctly. Again, make sure the permissions have been set for the database and that the system DSN has been set up correctly by the server admins.

************************************************************ *********************

We did everything the web host asked us to do, that is, changed all references to the C drive to new references to the D drive, but the error is still there.  We also never changed any passwords (as far as we can remember).  Can someone please tell us where to look (also which file might tell us what the correct password is in case it has in fact been changed.

It appears there was a flag problem. When reading it into SQL Server, it converted the True/False in Access to 1/0 in SQL Server.

ok... lets forget about all this redirecting business for a minute

when I go to "GP01.asp" directly via your web site I get a big nasty error that says this

Microsoft VBScript compilation error '800a0411'

Name redefined

/protect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^ 

then when I look at what you did in that file I see why

you have this code which is totally wrong because you cannot include the password protection file twice

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<% GROUPACCESS = "*1*" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

it should be

<%@ LANGUAGE="VBSCRIPT" %>

<% GROUPACCESS = "*1*" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

and that is probably the root of this entire problem.. the redirection was working...
but you were sending them to invalid pages with errors

all those pages are wrong...

if you dont see the real error above see this

http://support.cjwsoft.com/code/moreinfo11-1.htm

if you look over the aspprotect 7 installation instructions that is the very 1st thing I tell people to do

hopefully this is the info you need to continue and get some work done

Hi Chris,

Our company has a big dilemma on how to manage the database for accounts that are expiring/expired.

We saw the function to email a batch of users who are expiring soon but this doesn't help us to complete the renewal process.

Once the email is sent, what happens afterwards? how can we setup the system so that we can renew their expiry dates or accounts without too much hassle?

The system currently doesn't have any renewal functions or to allow batch changes on multiple accounts at the same time so we have to manually edit one account at a time. This is extremely tedious if we have over 1000 accounts to manage (and we will).

If you have anything to suggest on all this I would appreciate it :)

Thanks alot
Sylvain

ASPProtect v7 comes with working example code of protecting a file download.

This comes with the system as an example folder with some files in it.

(some of the initial purchaser's of the system might not have that directory.. if that is the case please ask)

Here is how it works...

Basically we protect the file download by only allowing a logged in user to download it. The special ".asp" page we use the stream the file is password protected. It also hides the true location of the file so you can keep your files out of your web or keep them in a folder in your web that does not allow file browsing. Under this scenario even if someone looks at the html source they can not tell where the file really came from and they can only download if they are logged in and you offered them the link to the file.

For the file download protection examples to work you may need to edit some values
in the stream_download.asp file that are valid for your setup.

Look at the source. The values you can edit are commented.

Now, you also need to call a valid "download file name" from the download_link.asp file which is an example of how make a download link to the streamed download.

If you re-start the web via IIS, reboot the server, or (possibly) just add and remove a category... that will clear up.

ASPClassifieds and ASPListings must be installed in seperate IIS applications if they are the same web. Otherwise the category caching system of each system will interfere with each other. They were never intended to be installed in the same web together since ASPListings is merely a stripped down version of ASPClassifieds and they share a lot of the same code. Like I said though if different IIS applications are set up in the web site you can do it because each IIS application will have it's own set of application and session variables.

If you would like me to, I also have no problem going into your machine real quick via remote access and setting permissions / putting the right connecting string in there for you.

I need to go in as an administator though to set the permissions.

I am an experienced ASP developer. Can you tell me whether this would be a very involved process, or whether it is pretty straightforward? I don't yet have a merchant account, so I am not yet familiar with any aspect of accepting credit cards online.

Thanks.

I did not make a mistake.. what I typed is what I meant to say. I think maybe you are taking it the opposite way as I explained it.

Regardless,

What you want to do... logging them in under https and then having them continue though the site under http is not possible.

It doesn't work that. way. As far as the webserver is concerned https is a totally different site than http and each have their own unique set of application and session variables.

In a sense no different than www.somesite.com is different then somesite.com (each has their own unique set of application and session variables as well).

Now, because of the nature of Forms Based Authentication session varibles created under one will not carry over to the over and thus no password access if you switch over from a secure url to a non secure url.

If you want them logging in under SSL you need to keep them under SSL.

That is not to say there is some ultra complex scenario to mimic the session variables on the non secure side of things (possible with a complex http post to a non secure page from the scure page telling it what variables to create and set), but doing so means a ton of work and also has security concerns of its own.

ok.. so we got an NT server with a 486 with 256 meg of ram. 

hehe  sorry

anyway.. I have the system running without doing any importing and WOW is it chugging.. I mean it takes a while even to edit/save a user

good news is the filesystem object works as I wrote to a text file

this may end up being a simple case of lack of horsepower..

we may need to do the importing on a faster system and then take the database over cause everthing I see on your server looks correct

even so aspprotect is running so slow.. I have never seen it chug like this

I even tried connecting to a 2000 version of the database and no difference.

I am not totally sure what is going on but the server resources available are scaring me... however this could be something new in the code that I never got a chance to try on NT server.. I dont think so though

how does your other stuff run ?

static pages that do not access a database seem to serve up quickly.

are you running any other dynamic code ?

Well. fontpage publishing is evil. That you have found out.

Do not use it. It usually wont work right when running asp code locally and also at the server because of differences with the paths and virtual directory structure. etc etc etc

You can definetly use frontpage to connect to the web site live and drag and drop files into it/edit them... but the sooner you stop using the publishing feature the better off you will be.

[QUOTE=cwilliams]Humm, Did you make any changes to the code ?
Solid Black is not the default so it must have changed at least once.[/quote]

I did change the top_logo.gif and the associated link. That was on the default page not the Solid Black skin which is unchanged. After downloading/uploading the skins I tried changing it to one of the Beach skins and that's when it changed to Solid Black and has been stuck there ever since.

[quote]Otherwise it might be some sort of application variable problem.
I would make sure the web is and "application" in the IIS console.[/quote]I don't have access to the Microsoft IIS console as this is a host site. I can access the site's "control panel" but it does allow for those type of settings. Mostly just permissions, DSN entries, etc.

Thanks.
Al

It's just a generic error that means one of 1000 different things is wrong.. there is a lot of information on in in these forums as well as links to articles about it.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=27& PN=1

usually it means permissions to the database folder are incorrect or the physical path you are specifying for your dsn-less connection is invalid..

everything has to be perfect

You can mix and match banner calling methods all you want.
Try it and see what happens.

However, the only method that is going to work on non ".asp" pages is the javascript or the new iframe method listed in the support forums.

btw: who is this hosting company anyway ?

and did they give you access to a control panel that lets you manage your site ? sometimes that is where you manage those permissions if their interface supports it

lastly, are frontpage extensions installed in your web so it can be connected to via frontpage ?

Our webhost set the permissions, but the error is still there, so that is obviously not the problem.  We now have both our webhost and our asp support technician trying to figure out the problem and everyone is stumped.  Can you please provide us with the following information to help us out:

1) what is the name of the file that sets the connection string?

2) what is the name of the file, if it is different from above, that sets the password of the database?

thanks

Ok i was wanting to know what the "if then" statement would be if i wanted to show xxx if your group is xxx.

I tried

    <% If Session("Groups") = "1" then%>
    <font size="2">TEXT HERE</font>
    <%end if%>

But that did not seem to work.

sorry, I am guilty of being very tired and didnt read your message fully.

I know this forum area is called "database connection issues" but it is only meant for generic issues.

Issues specific to a particular application need to go in that applications area in the forum. It keeps the forums more organized and helps other people fnd help later on.

So please post in the correct area.
I will answer this question soon. I have to do something 1st though.

That did the trick. Once again a quick very helpfull reply.

Thanks.

it is an email server/setting issue most likely

your email server probably requires outgoing authentication or something like that and that is why internal emails can be sent to but nothing else

its something along those lines

this will help you see the real error instead of the generic 500
http://support.cjwsoft.com/code/moreinfo11-1.htm

ok, here is what is going on

you are password protecting an ".asp" page that requires querystring info to run correctly   (example - "somepage.asp?ID=3"")

that is something I never intended anyone to do.. while it does handle and repass the querystring info along during successful login it does not re-pass that info during a failed login as you have found out

this is all by design.. the only reason the system re-passes the querystring info at all is because I wanted to make it smart for the sake of the remember me/cookie feature.. so if someone was using that and bookmarked a page deep in your site with querstring info...then when they went back to that bookmark they would get authenticated and still see the page as intended with the querystring info in tact

it was a nice feature never intended to handle any situations other than what I just described...

now...
notice the url in the browser after failing a login.. then logging in successfully.. it is missing the querystring info

that more than anything is what is going on..  browser caching can cause some confusion when dealing with this because the browser likes to return you to the page minus the querstring info... when that happens a simple browser refresh at that time may very well solve the problem and then you see the page you are supposed to see...

To avoid all of this...

One solution to this is to always start people logging in to an ".asp" page that has no querystring info. That way this won't happen. Once they are logged in you can then offer them links to the pages they need to go to. (you of course still want to password protect those pages)

Another solution is to log them into a page with no querystring info and then do a response.redirect to the page with quersytring info.. thus accomplishing the same thing but without the possibility of the issue because of a failed login.

Another solutions is to do checks in your asp page for missing querstring info.. and if it isn't there do something about it like send them somewhere else.. or display a message about there being an error... etc etc

So,basically you don't want to tell people to login into such and such page with querstring info... and providing a username and password..... You can do it but like you found out it can cause an error if they mess up logging in the 1st time. The system just was not designed to handle that. There are complex reasons for that involving security that would just take me too long to explain.

I hope this makes some sense to you.. it is very hard to try and explain

one thing to note... the time period we are talking about is going to to be whatever you have the session timeout set at in the settings.

perhaps making that value lower like 10 minutes is an option for you.. and might help to deal with situation

If things are not perfect there will be no log files and no errors.. it can only be one of these things really
http://support.cjwsoft.com/code/moreinfo313-2.htm

You may also want to make your the filesystem on the server is working and not disabled by norton script blocking or anything random like that. Testing the filesystem object is best done by writing a simple text file to a folder. Plenty of examples of doing that can be found at www.aspin.com

Recent activity is temporary and admin activity in the admin area is not tracked. If your application in IIS has reset or there has been no activity in the users area or in pages you protected there will be nothing there. The busier your site the more chance something will be there. For example usually our online demo has something there except right after 4am when my server does an iisreset.

This user is talking about preparing more than 100 pics at a time for an album that already exists and doing it using linux.

I asked the user to post the code here because I think it is interesting and it may help someone who is working with the app.

This article is not for everyone for a few reasons.

1.) The application can already mass import pics on it's own. It does 100 pics pretty quickly on a decent server. The built in method also resizes pictures and make low res thumbnails should your server support a supported ASP image resizing component. The method above simply rename pictures in a folder so the application will see them as part of an album.

2.) We don't support or recommend that anyone sets the application to use more than 100 pics per album. It is just not tuned for that and there will be issues. Please dont ask me what they are as it is complicated and I am not sure/dont remember what they all are.

3.) Your going to have to be familiar with linux to use the code shown above.

When a user 1st signs up a proper case function is run on certain fields.
This is only once on user signup and never done in the admin area.

It's goal is to keep things entered in Proper Case,

so if someone enters "chris williams" it becomes "Chris Williams"

It's not perfect but it helps a lot to keep the data clean and more consistent. Since it only happens during registration those values can be changed later by the admin or the user if someone wants to.

The function is only applied to the fields that it makes sense to apply it to.... 
In your case adding a drop down menu means you want exactly what is in your drop down to appear so you wouldn't want it happening.

That being said, it is really easy to remove this situation from any field it is happening to during registration.

So edit "users/add_new_account.asp" with a text editor

find

CmdAddUser.Fields("Company_Name") = PCase(Company_Name)

and change it to

CmdAddUser.Fields("Company_Name") = Company_Name

That is all that is needed to made the change

its part of how the skins load.. regardless you got bigger problems here..

I am beginning to wonder if you unzipped the download correctly because I see things in folders they should not be in...

you should have ended up with a bunch of folders and files...

It you just ended up with a ton of files in one directory you did not unzip the zip file correctly... if so check your zip program settings.. I mean that error is because it is looking for a file in the skins folder that isn't there and it should be there

better yet, unzip the downloaded zip file using windows xp built in unzipping features which will do it correctly...

I really need more info on what you have going on?

This can sometimes be cause by a slow server / bad data connection.

Sometimes caused when someone is using the option pack but did not make the proper changes to the database.

Sometimes caused when a user adds users the database on his own and does some "incorrect" things..

The more details you can provide the better. Think of anything and everything and describe it.

SQL or MSACCESS... version of either
Server OS
Using Option Pack or not
Did you have your host set permissions...

etc etc etc

I'd say that the vendor is right so I've submitted a work order to
create the *****.com/aspnetprotect directory as an application.
If there are any other directories for which this needs to be done,
please let us know. This particular task always needs to be performed
by our staff.


If you need to follow up on this job with one of our on-line or phone
technicians, you can reference ticket id 11860.

With regards

Humm, I can see all those pages loading just fine at both domains so you got me pretty confused at this point as you just said they didnt load.

regardless, the data connection tests are failing with both of them.

so let me ask you again how are you setting permissions on the database folders?