Below is the email I received when testing the self-registration. Does anyone know what setting I configured incorrectly?

I received the email to confirm the registration but the link to activate is invalied.

Thanks!

Your registration still has to be validated.
Go to
?u=bubbaj&v=4579
to verify your registration.

ok... lets forget about all this redirecting business for a minute

when I go to "GP01.asp" directly via your web site I get a big nasty error that says this

Microsoft VBScript compilation error '800a0411'

Name redefined

/protect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^ 

then when I look at what you did in that file I see why

you have this code which is totally wrong because you cannot include the password protection file twice

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<% GROUPACCESS = "*1*" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

it should be

<%@ LANGUAGE="VBSCRIPT" %>

<% GROUPACCESS = "*1*" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

and that is probably the root of this entire problem.. the redirection was working...
but you were sending them to invalid pages with errors

all those pages are wrong...

if you dont see the real error above see this

http://support.cjwsoft.com/code/moreinfo11-1.htm

if you look over the aspprotect 7 installation instructions that is the very 1st thing I tell people to do

hopefully this is the info you need to continue and get some work done

I don't believe that the iframe method is supported in a .NET (aspx) implementation, is it?

JDooley

I getting a strange error with ASPProtect.

 Microsoft OLE DB Provider for SQL Server error '80040e14'

Unclosed quotation mark before the character string '¾_^Ö'.

/aspprotect/check_user_inc.asp, line 114

If I check the database directly "¾_^Ö" is the exact string for the password.

Any Ideas

no, that system only works with ASP.NET code.

Currently it can not possibly work with classic asp.
PayPal made it a nightmare to use and work with.

Special things regarding the signing of digital certificates also need to be installed on the web server so if it isn't your server your also out of luck.

Sorry, I guess you did say you finally found them.
Regardless, sorry then, I tried

I dont know what else to tell ya.. except to search www.aspin.com

Perhaps you will find something you can use there.

Or at least I think so.  I have been trying to get this software to work so I can see if it meets our needs for an upgrade purchare. Here is my error.

Microsoft JET Database Engine error '80040e10'

No value given for one or more required parameters.

/aspprotect/scripts/populate_config_variables_inc.asp, line 15

My provider says that the problem is NOT on there end, that it is a problem with the code.  I think that it is a database connection problem.  Can you please help.  Below is my connection string based on what the setup page directed me to do:

ConnectionString = "data source=\\NAWINFS03\home\users\web\b1347\rh.957theride\asppro tect\data\database\ASPProtect_access2002.mdb; Provider=Microsoft.Jet.OLEDB.4.0;Jet OLEDB:Database Password=temp"

When I first set up the program I got this error:

Provider error '8000ffff'
Catastrophic failure
/aspprotect/scripts/populate_config_variables_inc.asp, line 11

Once again, the looked into it and said the permissions were fine and that the code was most likely bad.  But then the errror changed to the one that I first listed.  Which is the one I am currently getting. 

BTW here is the page address

http://www.957theride.com/aspprotect/password_admin/get_me_i n.asp

Thank you!

Sorry, not really.. not without a lot of changes to the code.
the recent activity info recycles.. it is not meant to be day by day

My suggestion there would be to look at both the log files and the user activty screens...

It really means just what it says. Your connection string is just not valid and the sql server speicifed can not be reached. The username and password could also be invalid. Since you already had a database set up you should use the same username and password you have always been using. You also need to use the same database name you have always been using. Without actually knowing more and seeing what you are doing it is pretty hard to tell you anymore than that.

The directions and sql scripts given are for setting up a new sql database. Applying them to an existing sql database requires a slightly different approach. Modificiations to the SQL scripts elimintating references to the usernames/password/database we suggest in the scripts is also a good idea.

A data connection is a low level as it gets. Until you get that working you are really not even touching any of the code in the ASPListings application.

If you want I have no problem going into your sql server and web and setting up for you correctly.

Thought this would be easy.  A few more pointers should get the database connection to work:

1) How do you decide whether it is a DSN (system datasource) or not? Does just putting the file in the ODBC make it so? 

2)We have other files in there for other server applications, does that mean we’re stuck using DSN’s or is the file independent of that control dialog?

3) Assuming we get rid of using DSN for this database (or not), does the code go referenced in your article http://www.powerasp.com/content/hintstips/permissions.asp apply here or should it just work?

What else are we missing?

Our login works great, variables even help determine menu options.  When user logs on, however, it opens in a new page.  Is there a setting somewhere that sets whether you can open in a new or existing page?

Also, when you log off

Terribly sorry, but we are not software-technical.  So can you please tell us exactly which folder the database would be in.

Thanks in advance.

Chris-

A general question - Can you have multiple instance of the gallery on the same server? 

My hosting company uses ASPEMAIL - and I am trying to setup the mailing settings on ASPPROTECT - but cant seem to get it to work.   I've tried many different options - here are two that are the closest - but have issues:

1. If I use the settings:

email component: aspemail

Mail remote server: my internal server name

*no smtp authentication

email mail notification - my email address on my internal server

***I get the following results:

       I can get get notified when a new user logs in, email a user from aspprotect user screen if they are in my company and have a valid email -- but I can not send to the outside world - I get an relay prohibited error.

2. If i try to change the setting to use the Hosting Website email server - I get the following results:  I dont get notified when a new user registers, I cant send to internal company people - but I can send to the outside world.

**any suggestions on what to do? I'm trying to work with the people who manage the mail servers - but since I dont know anything about them - its a bit difficult.

I have seen that happen before though it usually just happens once and then after that it doesn;t show up. It's the asphttp component doing it. The ASPBanner system is not doing it. I would try using banner calling method such as the xml parser method. It's usually installed by default on 200 and 2003 servers.

• What kind of encryption do you use with version 7?
• If I purchase version 7 and use it on my site with a new SQL database then migrate the old records from version 6 so I can by-pass the issue with my home-grown Base 64 encryption, do you forsee other issues with the upgrade?

Different Versions of the Access Database

Below is a zip file with many alternate versions of the Access Database provided to help with installation and general usage.

2005-02-20_155310_ASPProtect_Database_Versions.zip

ASPProtect.mdb is saved as an Access97 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2000 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2002-2003 database (password "temp")
ASPProtect_access2002_no_password.mdb is saved as and Access 2002-2003 database with no password set on it

Try to use the newest version as server odbc drivers sometimes have to use the newest version for everything to work correctly. No password version is provided because sometimes there are issues connecting to a database with a password set on it.

Default username for access databases is of course "admin" but you really dont use that except in the data connection information.

The Read-only attribute i was referring to is at the windows explorer level when looking at the folder properties under the general tab. 

ASPNET and IUSR have full access to the _database folder as you suggested - Yet still I get the permission error noted above.

so, on control_pics.asp where you see

<% =TempDesc %>

you could try doing this instead

<% =Replace(TempDesc,"&nbsp","") %>

Suprising I started this tread off on ASPImage, but I resolved my issue and forgot to change the thread topic.  I will try your suggestion.

maybe this is the issue...

do you realize that the descriptive name you give a group is not always going to be the same ID in the database ? The two are not related.

Perhaps what you named Group 1 is really group ID 3

You can tell for sure by generating protection code for group 1 and see what ID it tells you to use..



You also need to remember that you are testing this with different users and it is really easy to get confused so you need specifically log off using the log off page to ensure session info from the previous login doesn't show up and cause confusion when you log in with a different user... etc etc

in addition to logging off that way you may also want clear the session and application info via the code at the bottom of my article
http://www.powerasp.com/content/new/displaying-session-and-a pplication-variables.asp

and do that in between any user you log in as

You are not supposed to use "../" with a virtual include

Thats goes against what a virtual include is and makes no sense.
When using a virtual include you give the path as if accessing from the root of the main web / virtual directory

I find it very hard to believe it ever worked like that and if it ever did it was wrong.

probably.. better than what we are accomplishing here LOL

or if you like send me the import file and your encrpytion key and I will try it out here and see what happens

either way PM me any sensitive info if any

Both the NET and Classic ASP versions of this application are designed for fine granularity protection of individual apsx extension files. ASPProtect.NET is not designed or intended to protect sub directories, or non aspx content such as Adobe Acrobat .pdf files etc etc.

I completely disagree with your statement that “most sites” have a login box on the left hand side of the page. I suspect you thinking of the ever popular php based forums and “Nuke” type CMS systems which are set up that way but if you look at any site written entirely using .NET that’s rarely if ever the case. (Granted I cant say for sure because I personally haven’t looked at >50% of the estimated 18 billion +  web pages on the internet) Just off the top of my head www.CafePress.com come to mind as a pure .NET site. If you take a look the login button it takes you to its own login page there is not global login form used throughout the site. Reason being that .NET introduced this thing called a “view state” which is used to store things like your session ID (and way more) and must be posted back to the server in order to keep track of visitors. This technology comes in especially handy when you have a web farm in place and your content is being spit out out by more than one server at the same time

I can think of loads of scenarios where the web servers need to know who you are even though you are never directly contacting them via http. This approach is a very smooth and actually very clever solution for enterprise level websites that simply can’t be handled with a single web server.

 On a practical level I know what you are saying but that application sets up all sorts of things when a protected page is accessed and the user is not yet authenticated. That’s the entire reason you need to put that snippet of code at the top of a page you want to protect. That code snippet calls the ASPProtect.NET class and runs through all the logic to see if you are able to access the page. If you are the subroutine exits and the server continues to process the remaining logic on the page. AKA you are able to access its content. If you are NOT authenticated ASPProtect will setup all the proper session and viewstate info and redirect you to the login page for authentication. You may have also noticed a parameter on the login page called ReturnURL. The application looks for that info and if you do have a user ID and password the application automatically redirects you to the page you were trying to access in the first place.

Really I have no idea what you are trying to do, but there is a world of difference in how something looks verses how it works. Lets just say there was a simple way to do what your thinking, what are you going to do with that login form after the person logs in? Just keep displaying it on the entire site so people get confused and don’t know if they are logged in or not? Just that little part of the equation will require making some changes to either ASPProtect.NET or your application will have to have some logic built into it to stop displaying the login forum.

It sounds to me like your basically looking for a super simple 101 type deal that allows people to sign up for an event and you the admin can see that information? I’m guessing they can also log in again and check out their details and see what event they signed up for?

If that’s the case you’re trying to take a very sophisticated protection application and downgrade it into something that would be one heck of a lot easier to write all from scratch in about an hour.

Your not going to be able to “plug and play” a simple form into a page and turn that application as a magic universal login solution for a website, while its 100% possible to use the application that way if you choose, you need to check out the source code and plan your custom integration accordingly.

actually  I just went to it again and it was somewhat slow coming up this time..

perhaps you have some issues with the sql database.

it should be instant.. like this one I run on my server
http://banserver.powerasp.com/aspbanner/

I suppose it could also have something to do with sql server resources but its hard to say..

The ASPProtect v7.x Documentation is now available as a download in windows ".chm" format. (needs to be viewed on a windows based machine that can read it) If you are using XP with Service Pack 2 follow the instructions below or you will not be able to view the help file.

Download Documentation

You should save this file and then open it.
Just opening it from download may not work and you will not be able to read it correctly.

Please continue to check the support forum threads for the most up to date documentation.


IMPORTANT
If your are using xp with service pack 2 there are some new security features that can block the access of help files you download. So as far as the ".chm" file goes.. you have to download it... right click on it...go to properties... then  choose unblock down in the lower right corner ...then you can open and view the file correctly

I would look on the pictures folder on the server and see what is there for pictures. Also, when you see a broken X on the site right click and see where it is trying to get the picture from and what the pictures name should be.

I would also be sure to clear out your temporary internet files in IE. clost and restart all browsers..

maybe show me the site ? so I can see this happening ?

sure and thats probably what you should do... that pure asp upload thing must not be able to handle the size of your import file... another thing which can very .. also some versions of IIS require registry changes to upload bigger files via asp code alone

Yes worked fine

thanks

trust me, they (serverobjects) do not check processors.. as a matter of fact they haven't answered support emails for about 3 years. All they do is sell those components like hotcakes and take in mad crazy cash. But I will say the stuff does work well and always has. (that guy probably took all the money he made/makes from those components and took off to Jamaica or something sitting on the beach drinking margaritas)

regardless,
ASP just cant resize pictures on it's own.
It' just not possible. You need a 3rd Party component.

There isn't much to say about the ASP.NET thing.

If your server has ASP.NET installed (meaning you can run aspx pages on your server and the ASP.NET framework is installed) and running you just pick that option in the config file and ASP Photo Gallery will use ASP.NET to make dynamic thumbnails for you.

To run ASP.NET it must be a 2000 or 2003 server.