You are not supposed to use "../" with a virtual include

Thats goes against what a virtual include is and makes no sense.
When using a virtual include you give the path as if accessing from the root of the main web / virtual directory

I find it very hard to believe it ever worked like that and if it ever did it was wrong.

Chris,

I have had a couple of users log out of the system as they are supposed to, move to another computer and not be allowed to login because of "they are currently logged in using another IP address" when in fact they logged off properly.  Is there anything that they should be doing differently?

Thanks,

Jess

It's not working because i guess im copying the viewstate also...and it comes up

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.

MSACCESS 2000

server: windows

option pack: yes (after the install I have this problems with groups and edit users )

host permissions: yes

MESSAGGE:
Active Server Pages error 'ASP0113' Script time out/password_admin/groups.asp The maximum amount of the time for a script to execute was exceeded. ...

No rush, I have it out on the internet, but have not gone live with the site yet.

Thanks for responding,

Enjoy your well deserved break

Hi,

Sorry, but the way the system works you can not call an individual banner like that. It just not something the system was meant to do.

If you wanted a specific banner to show up at all times you would have to make an individual banner and a zone just for that.

After looking at your site since you have so many banners there I dont know if that is the greatest option for you. It would also put a lot of stress of the Version 7 software because it is not really meant to call so many banners zones at one time on one page.

If you could live with tracking clicks on the home page but not displays I would suggest making banners for the home page in one zone. Then hard coding the banner images into your homepage like you already do but linking to the tracking part of aspbanner instead of where they would usually link to. That way you could at least track clicks and there owuld be no performance issues.

for example.. one of the images might link to
http://www.poconocommuter.com/aspbanner/banner_redirect.asp? Banner_ID=4

which would track clicks for you.. and then send then wherever they are supposed to go

ASPProtect v7 comes with working example code of protecting an image from being downloaded and also protects the true file location of the image on your server..

This comes with the system as an example folder with some files in it.

Basically we protect the image in 2 ways.

All in all this is should be very effective protection. Yes, there are still ways to get the images like doing screen captures, but this will ensure that people viewing images are logged in to your site. This will in most cases keep them from right clicking and saving the images. This will ensure that people can not tell other people the image's url location and it will ensure other sites can not leach your images and bandwidth.

For the image protection examples to work you may need to edit some values
in the stream_pic.asp file that are valid for your setup.

Look at the source. The values you can edit are commented.

Now, you also need to call a valid "image file name" from the call_pic.asp file which is an example of how you protect a page with javascript and call a streamed image using an image tag.

Lasty, here is a great article I found on image protection and some of the things you can do about it and some of things you cannot.

http://pubs.logicalexpressions.com/Pub0009/LPMArticle.asp?ID =41

All this being said installing the desktop version of SQL may be a little tricky as it may complain that your SA account needs a strict password.

The solution is to run the SQL Desktop setup.exe with some parameters specifying a password for the SA account.

So you go to the command prompt or make a shortcut to the setup file and run something like this

setup.exe SAPWD="YourPassword"

minus the quotes...

I got that info from this article and it worked fine
http://www.experts-exchange.com/Databases/Q_21036508.html

The other thing to remember is it might take a reboot to actually see the SQL server icon running in the taskbar. You may also need to go into the administrative services and enable the "SQLSERVERAGENT" as well as set its startup type to "automatic"

And a reboot here and there..

Whammo... your in business...

This is great documentaion for windows script 5.6
in windows chm file format for jscript and vbscript.

We use server side vbscript in all our our ASP 3.0 applications so this info can be a lot of help.

2005-02-18_150921_vbscript_docs.zip

Really awesome, thanks..

If possible please be sure to respond to the email they send so the review ends up authenticated

no, there is not not.

If you wanted to to that you would have to add some code to check their album count in the database and not allow them to make a new album if they were at the limit.

Is there a way to know if it is a SQL server with IIS5? My database type is MSACCESS.

Thanks!
Rhona (rookie)

Cool.

Well I'm in the middle of uploading the txt file and it's about half way done and sitting there...so I'm keeping my fingers crossed.

This user is talking about preparing more than 100 pics at a time for an album that already exists and doing it using linux.

I asked the user to post the code here because I think it is interesting and it may help someone who is working with the app.

This article is not for everyone for a few reasons.

1.) The application can already mass import pics on it's own. It does 100 pics pretty quickly on a decent server. The built in method also resizes pictures and make low res thumbnails should your server support a supported ASP image resizing component. The method above simply rename pictures in a folder so the application will see them as part of an album.

2.) We don't support or recommend that anyone sets the application to use more than 100 pics per album. It is just not tuned for that and there will be issues. Please dont ask me what they are as it is complicated and I am not sure/dont remember what they all are.

3.) Your going to have to be familiar with linux to use the code shown above.

All of the fields with the expected paths show the correct file structure, so now I've put them in them in the boxes

Please be more specific. What hit count are we talking about ?

User Logging ? Albums ? Something else ?

Please descriube the situation in detail. There are really no settings for any sort of hit count.

Our webhost changed converted all sites from c: to d:, and without us doing anything else, our customers now get the following error message when trying to access our Classifieds site:

***********

Microsoft][ODBC Microsoft Access Driver] Not a valid password.

This means there is most likely a problem with the "ConnectionString" info that you specified.

If you are using a DSN-Less Connection with MSACCESS.

Check that the physical path to the database has been specified correctly.
It has to be perfect and correct. It cannot be specified using "http://" or by using "server.mappath".
It has to be specified like the following example.

ConnectionString = "DBQ=D:\Inetpub\wwwroot\advpass_pro\_database\passwords.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=admin;PASSWORD=Xpass"

If this is running on an NT server or Win2000 Server make sure that permissions have been set on the database.
Only the server admins can do this. If you are not the admin you will have to ask for this to be done.

If you are using a System DSN

It is not set up correctly. Again, make sure the permissions have been set for the database and that the system DSN has been set up correctly by the server admins.

************************************************************ *********************

We did everything the web host asked us to do, that is, changed all references to the C drive to new references to the D drive, but the error is still there.  We also never changed any passwords (as far as we can remember).  Can someone please tell us where to look (also which file might tell us what the correct password is in case it has in fact been changed.

Why all the pages at the directory .../password_admin/ are very slow to open online?

Hi,

I basically explained how I thought that might work here where I went over everything I could think of and suggested you download the free version and see if you could get it working
http://support.cjwsoft.com/code/moreinfo488-1.htm

The part about using the alternate scenario involving querystring info from a url.

I have never done anything like that and that is why I told you what I knew and suggested you try it with the free version...

There was nothing wrong with the server configuration. It turned out that the problem was that I disabled the email notification of new user registrations that I continually receive. That appears to disable the authorization email to new users as well.

One other issue. It appears that AOL email addressee's are not getting the authorization email. Does AOL have any blocks to CDONT generated emails?

Not sure because of the nature of the javascript method

for starters tighten up the html around the banner call

change

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<!------- ASPBanner Ad code ------------->
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >

</td>

to

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >
</td>

If that doesn't help I would suggest using the ASP 3.0 version of ASPBanner. It can serve banners to a any type of page extension and it runs just as well as the .NET version. There is a new iframe method for calling banners that you can try instead of the javascript. The iframe method is explained in the ASPBanner Unlimited section of the forum.

import/export feature WARNING !!

I just want to warn everyone that the built in import/export feature can be a little dangerous.
The reason being is when you import users they get new "Users_ID"s in the database.

The "User_ID" field is an autonumber field and that is why and there is nothing you can do about it.

So, if you are using a user's current "User_ID" to keep track up something important NEVER export the users and re-import them. Because their "User_ID" will change and you will be in trouble.

The PayPal signup features of ASPProtect actually use the "User_ID" like this and that is the main reason this warning is here.

now, that being said

If you are importing new users into ASPProtect

or

simply exporting existing users to another system

then this is nothing to worry about.


Basically, the moral of this story is dont think of the built in Import/Export feature as backup system because it is not. It is not a substistute for backing up your database.

It is a just a tool that can come in handy for various things.

It turns out that I never enabled ASP.net on the site. After doing that the skins work much better. I'll have to poke around and see what other functionality is now available.

Thanks!

Al

I just added this line to the paypal1.asp page

<input type="hidden" name="currency_code" value="CAD">

and it worked.  Clearly other values can be entered for other currencies.  Everything was listed in this manual https://www.paypal.com/en_US/pdf/subscriptions.pdf.

Cheers
Roy

I think I've got it to work somewhat.  I modified the 2checkout1 & 2 asp file to use and pass Product_id.  It now identifies the product correctly.  I'm good fo now. Thanks for the info though.

-Jason

I am using cdont to send email. what do i have to do send email to other display my full name instead  of email address. In other word I want to see first name last name  in their email client instead of email address.

thanks for your help

More Info in Case Anyone is Interested:

This bug was mentioned by a couple people. The cause of it was never really understood until I recently re-wrote some of the banner code for an upcoming version.

The fix for this bug was very simple. It was just one of those weird situations where code should have worked but did not. I added some code to do it a bit differently and it worked as it should have..

It really still makes no sense to me why it didnt work the way it was, but at least there is a fix.

Did you see this thread. It shows how to set up the project in Visual Studio in detail.

http://support.cjwsoft.com/code/moreinfo85-1.htm

umm.. rename the pages to ".asp"

After all these are ASP scripts we are dealing with and the product is called ASPProtect.

The web site says it is used to protect ".asp" pages

And the directions tell you to put the protection code on ".asp" pages.

ASP can not run in ".html" pages

If you do not know basic things like this you should really learn the basics of ASP before you try to use the application. I would suggest a good book or two. ASPProtect is for people that have at least some experience with Active Server Pages.