I have connected to countless DB's using my own applications written in dreamweaver and have tested them on my own server and also my web facing one.  BUT this seems to be different.  no matter what I try I still get this error.

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x440 Thread 0x6b0 DBC 0x1f995bc Jet'.

On both a windows 2000 server and also a windows 2003 server. Also using both DSN and DSN less connection and oledb.

Any help would be greatly apprectiated.

Thanks

this could go on forever...

if you want PM "private message" me info to log into your site.. show me the pages we are dealing with...

and I will take a look at it all...

CJW

Sorry, I guess you did say you finally found them.
Regardless, sorry then, I tried

I dont know what else to tell ya.. except to search www.aspin.com

Perhaps you will find something you can use there.

If you can would you do it for a price as a mod or will this be added to the new version.

yes, like macnap says.... you have to protect your ".asp" pages the way the directions tell you to...

and like in the "example" protected pages we provide

or they will not be protected and nothing will happen as far as ASPProtect goes

I guess I just didnt understand what you were talking about

it is by design actually and something that can be improved
(I just never thought of it when I 1st designed the system and it is actually planned to be added in Version 8)

The trick would be to reset those session variables anytime someone edits and saves their information... not very hard at all

you would do it on the save code page for when a user edits themself.
you want to grab the info posted from the form and  reset each session variable at the same time everything is re-saved to the database

example

Session("Company_Name") = Request("Company_Name")

When I enter www.vickerylightning.com/aspgallery/dataconn_inc.asp on the screen it says "Not a valid bookmark"

as far as that goes I have no idea.. I have never seen that message before but you are not suppose to run that page by itself regardless.. it is an include file not meant to run on its own

User Registration

The "users" folder allows users to sign themselves up and edit there accounts as well as retrieve lost passwords..

In the settings tab of the ASPProtect admin area there are options for which fields are used and which are mandatory when a user signs up. The only validation the system performs by default is checking for mandatory status. If you want to add more validation so reduce the chances of input errors that is up to you.

You can add additional server side validation by doing server side checks on the save pages... you can also make the field sizes larger in the database if you think you need to. You'll need to be good with ASP to do this.

Always backup your files before making changes to them so that you can revert back to a working copy if you mess something up.

I purchased and installed the full version ASPProtect 6.0 in Feb 05 (must have been just before 7.0 came out) and have been using CDONTS for email authorization during the registration process.

It was working fine for about three months. Now, after registering, the  email  authorization is NOT delivered to the new registrant. There are no error messages.It just doesn't arrive.

Any thoughts on the subject would be appreciated.

The Double DIM needs to be removed for this code to work properly.

<%
Dim BannerZone, BannerConnectionString, BannerDatabaseType, ConnBannerSystem
Dim CmdCheckUser, CmdGetConfiguration, App_Name, Config_SQL, BodyTag, BanDataConn
Dim CmdBannerTemp, CmdGetZones, ZoneString, ZoneArray, ZoneIndex, CmdUpdateWaiting
Dim CmdUpdateExpired, CmdRetrieveImpLimitedAds, CmdRetrieveImpressions
Dim CmdUpdateImpHit, CmdRetrieveAds, CycleBannerTotal, CycleList, NewCycleList
Dim Dim LoopBanner, CycleLoop, CycleListArray, CycleListArrayIndex, BannerCycleData
Dim Banner_Array, CurrentBanner, NewCycleListArray, Banner_Array2, LocationIndex
Dim Stop_Processing, Keep_Processing, CmdUpdateStats
%>

Hello,

1.)

I dont really have any ideas about the japanese characters. I also don't have any ideas about changing settings in the database. Your going to have to do some research on all of that.

Perhaps try pasting the text into a text document 1st.. then copy/paste them into the application. Perhaps that will eliminate any unseen weird characters. I do it sometimes when pasting things from word to my html editors and it works great.


2.)

I dont/cant support custimization to the code but here are some tips to get you started.

edit "items_inc.asp" carefully with a text editor
(back it up before you begin so you can revert back)

change this anywhere you see it

?SORTBY=Name

to

?SORTBY=Name+Asc

or

?SORTBY=Name+Desc

Expiriment to see which gives you the desired sorting.
Do the same process for the price.
The + Sign just passes a "space" back to the page in the proper format if you are wondering.

3.)

The items for page setting is easy. Just go to the settings page when logged in as the admin. Edit this field.   "ResultPageSize"

More info on the groups session variable.

Session("Groups") will contain the ID numbers of whatever groups the user is a part of.
It does not store the descriptive name of that group. It will show the same data that is actually stored in the "Groups" field in the database.

for example it might hold a value like this

*2*,*5*,*9*

meaning a user is part of groups 2, 5, and 9

so if you wanted to check to see if a user was part of a particular group you would do something like this

<%
If InStr(Session("Groups"),"*9*") Then
     Response.Write("You are a member of group 9")
End If
%>


Taking this even further, if you really wanted to get a particular group's name or description you would have to query the database like so. In this case we ask it the name and description for group 9.

 Group_ID=9
 Set ConnPasswords = Server.CreateObject("ADODB.Connection")
 ConnPasswords.Open ConnectionString
 Set cmdTemp = Server.CreateObject("ADODB.Command")
 Set CmdEditGroup = Server.CreateObject("ADODB.Recordset")
 cmdTemp.CommandText = "SELECT " & tbl_label_groups & ".* FROM " & tbl_label_groups & " WHERE (Group_ID = " & Group_ID & ")"
 cmdTemp.CommandType = 1
 Set cmdTemp.ActiveConnection = ConnPasswords
 CmdEditGroup.Open cmdTemp, , 0, 1
  
 Group_Name = CmdEditGroup("Group_Name")
 Group_Desc = CmdEditGroup("Group_Desc")

If you bought ASPBanner Unlimited Version 7.3 Before August/10/2004 this file needs to be updated.

It fixes a bug where the JavaScript method is not properlly closing an html Image tag. It can cause other hyperlinks on your web page to link to the same place the banner links to. This does not always happen but this fix is the way the code should be so it is best to update it.

Copy this file into your ASPBanner folder over the existing file of the same name.

2004-08-10_125304_injectbanner.zip

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properlly.

The way to cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

Ok time for some more questions!!!

Is there a way to make the person's email address their default username... or force it in somehow instead of allowing them to create their own?

Let me put it this way.

My home page (default.asp) is an unprotected page.

When a user that has signed in on another (protected pages) and has the remember me checkbox checked closes the browser cookies should be set for the next time they return.

When the user opens their browser and returns  to my home page (default.asp), I'd like to put a message saying:
Welcome back <%Session ("Username")%>

How is this done?

There is nothing built in to the system but it is very doable.
However, you need to be a decent asp coder because your going to have to write some code.

Basically you would want to do a check on the screen where a user uploads to count how many pictures they have uploaded.

Then act accordinly and either let them or dont let them proceed.

On a side note the overall filesize limit of the total of all pictures a user can upload can be set when you edit a user.

You might just learn something and actually get your project finished before 2010

your over there hacking away on your virus infested WaReZ machine

LOL thanks for the good laugh-- i guess its time to do some reading and making my own mods to the program..

btw i never insulted cafrepress.. not sure where you got that from- just advised that what they have is exactly what i want to have done. How much for your service?

As an update to this thread I fixed the "upload_post.asp" page quite some time ago but forgot to post the updated file here.

So here it is.

2005-09-16_165913_upload_post.zip

The redirection feature isn't working as I exected.

If I clear a user's redirection_URL, they can navigate to any protected page on my website as expected.

However, if I set the user's redirection_URL to a protected page, they cannot login. More specifically, their browser just keeps displaying the login form while the browser's progress bar just increments ad infinitum.

If I set the user's redirection_URL to a NON-protected page, the user is directed to that non-protected page, but if they then try to navigate to a protected page, they are redirected back to the redirection_URL.

Is this the way the redirection feature is supposed to work?

My application requires that a user is directed to a protected page and from there, they can navigate to any page that they are allowed to go to.

What can I do?

I have a need for more than the current number of custom fields currently available in the registration form.  Is there a documented method of adding additional fields or am I not able to do so?

Thanks,

Dave

I have a customer who is asking the following:

... could you make a link from it to our website and is there a way to see what traffic goes from us to them.  They are going to pay a commission on sales, however I need to be able to track who views their site...

Wishful thinking or could you add code to track their IP address and display in the report section?  Not sure that would be enough to satisfy this request.   Suggestions?

Thanks, Lance

grrrrrr

As far as the users thing... my fault that was setup wrong in the settings of the admin login page.

but still dont have a solution for what im trying to do

Thank you so much that works great.

I will test with the other settings on the email server again thanks for the advice,

best regards

I just upgraded from 6.0 to 7.0 primarily because we were limited in the choices of email systems we could use to send an email validation message.

Previously, with 6.0, we were using CDONTS to send an email validation message to new registrants. Unfortunately, AOL email addressee's were not receiving the vaildation email from us. I received a reply to another post I made on this forum that the problem was due to the fact that aCDONTS generated email has no MX record and AOL blocks non-MX record containing emails.

Well, I upgraded to 7.0, switched to CDOSYS (Using SMTP Virtual Server) with SMTP Authentication and it appears that AOL is still blocking the validation email.

Any suggestions, comments?

ALL FIXED.. tested with real paypal accounts and a live system
works perfectly

THIS FIX IS ONLY FOR PAYPAL SUBSCRIPTIONS

Download this file "ipn.asp" and put it in the "paypal_sub_signup" folder
2005-03-10_164645_aspprotect_subscription_fix.zip

Basically somehow an older version of the this file was in the original download archive.

I am VERY SORRY

Anyone who purchased ASPProtect 7 before March 11, 2005 should download this fix.

Does emailing work under the simplest scenario ? (directly from the users screen)

Thats the way to test it..

All that error means is whatever reason the settings you have chosen are not working. It could be the server. It could be what you chosen. (and yes I realize your pop info from outlook should probably work with the settings you chose)

Whenever I do installs I often have to try 3-5 different emailing scenarios before I come across one that works.

Each time making some changes and sending out test emails from the users screen until I get somewhere. Often time getting a working example of how your Hosting Company wants you to send email from ASP is the info to get your hands on. (what method and settings)

In this case they may have blocked the usee of a remote server and want you to use some other settings for sending email from asp. A lot of times they put that info in their help system.

If I were you I would start by trying the other two CDOSYS options for starters, and then try the remote server option again but using "localhost" as the server, if none of those work consult your host for example code and settings to send email from asp. If you still have no luck I can help for sure.

Realize too when testing the emails may take a bit to arrive. A delay of sorts. Best to type in a quick note about which method you are trying in the email text. That way when you finally get one delivered you'll know which method worked.

Weird things happening, when I upload using the vb method the image fails and error is that the image was empty.

Utilizing ASPUpload and after clicking upload file I get a blank screen, no preview, no nothing (it loads with the proper header/footer) but a completely blank body.

Any hints?

Yes, you are right.

We have now tested it using the DSN less connection with Access 2002 and it works fine. We have also tested it again with a DSN using 2002 and this also seems to work.

The comment about speed is a consideration although I have not noticed any differences. ( we only have a few database entries at this time).

Thanks for your help

I set the max image width to 1000; previously it was null. Now I'm getting server errors:

page not found, then, service unavailable (the page is there). But in a new album, the images imported fine and it seems to be working now, despite the IIS issues.

I think my host restricted the amount of memory and resources my site is allowed to use.