Server Error in '/' Application.

---

<!-- Web.Config Configuration File -->

<configuration>
    <system.web>
        <customErrors mode="Off"/>
    </system.web>
</configuration>

<!-- Web.Config Configuration File -->

<configuration>
    <system.web>
        <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
</configuration>

Or at least I think so.  I have been trying to get this software to work so I can see if it meets our needs for an upgrade purchare. Here is my error.

Microsoft JET Database Engine error '80040e10'

No value given for one or more required parameters.

/aspprotect/scripts/populate_config_variables_inc.asp, line 15

My provider says that the problem is NOT on there end, that it is a problem with the code.  I think that it is a database connection problem.  Can you please help.  Below is my connection string based on what the setup page directed me to do:

ConnectionString = "data source=\\NAWINFS03\home\users\web\b1347\rh.957theride\asppro tect\data\database\ASPProtect_access2002.mdb; Provider=Microsoft.Jet.OLEDB.4.0;Jet OLEDB:Database Password=temp"

When I first set up the program I got this error:

Provider error '8000ffff'
Catastrophic failure
/aspprotect/scripts/populate_config_variables_inc.asp, line 11

Once again, the looked into it and said the permissions were fine and that the code was most likely bad.  But then the errror changed to the one that I first listed.  Which is the one I am currently getting. 

BTW here is the page address

http://www.957theride.com/aspprotect/password_admin/get_me_i n.asp

Thank you!

Thanks!  Will try both.

Appreciate the support.

5 Computers in an office, random hardware and operating systems.  Some wireless some wired - all the same ISP connection.

Some users do not see the PLACE A NEW AD hyperlink.  How can this be hidden?  There is no conditional statement yet some see it and others don't.

To make this problem even more confusing if I take an image and put the place_new_ad.asp hyperlink on that image the users don't even see that image any longer.

How can this be resolved?

Protecting ASP Pages

To protect a page without using the Access_Level or Groups feature simply add this code to the top of that page.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in.

An example of doing this is provided in the "default.asp" file included in the root of the Password System.
Look at the source code with a text editor to see the working code. It is quite simple.

 Protecting ASP Pages Using Access Levels

To protect a page using the Access Level feature simply add this code to the top of that page.
You simply specify the Access Level before the include file is called. In this example we are protecting the page with Access Level 4.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in as a Level 4 user.

Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System.
Look at the source code of the ASP pages in that folder with a text editor to see the working code. Again, It is quite simple to follow.

Protecting ASP Pages Using Groups

Please see the code generators in the admin are for the code to do that.

Hello,

If you see that when doing a view source then that code is not running.

I will need to go into your site and look as something is very wrong on a low level and I have no more ideas.

PM or email me the info and I will figure out what is going on.

I'll need ftp or frontpage access to the site.
I'll also need to know the urls for the asprotect system as well as the page you are trying to protect.

CJW

BTW.. I dont know what is going on But I keep getting all these returned emails. My forum is sending you emails and they are coming back as undeliverable saying your storage space is exceeded on your server.

Now that I think about you may very well be able to use the existing login_form_inc.asp page

the header and footer files for the users area may be ok as well.

probably the smart thing to do is try your old ones and compare them to the new and see if everything you need is there. If not add it by looking at the source html and comparing.

All other files should definetly be replaced with the new.

ok.. the count your talking about wont increment until someone other than you views the page.

After that you can increment it one time...

It keeps track of the last IP that hit it.. if it is the same it doesn't increment

This is all by design...  so the same person doesn't increment the count over and over..

It's simplitist and it can be tricked... but it does what it needs to do 

The pages in the ASProtect Full version that have emailing code in them are as follows.

password_admin/email_user.asp

password_admin/send_mass_email.asp

users/add_new_account.asp

users/email_password.asp

i will probably end up doing this myself, but dropping all the log data in a sql table would be nice as it offers much more flexibility on how an admin can keep track and use the data. Browsing through each log file is very inconvenient. I can search for text in the files (server-side, others with a shared server would probably have to separately download all log files first), but with the current method I don't have the following important options:

• cannot sort by any criteria
• quickly see a list of all login attempts by a specific user (i need to search each log file individually for this info)

if you had an option during setup perhaps (or elsewhere) in a future version that allowed an admin to specify the preferred logging method (separate files or a table in sql) i'm sure many admins would find it very useful to have a database alternative of keeping track of users becuase it would offer the two benefits listed above, plus more.

We would like to use some of the variables from the user account in our web pages after they log in (something like, 'hello <user>"), but for professional printout reports using company name and user.

Could you offer some help as to what variable string we use to print that information on logged in pages?

By the way,  the program is working great!!!

Hello,

If you are using ASPProtect Version 7 it is possible because version 7 supports html emailing. In any other version it would require some custom coding to add html email support. You would have to sort it out by experimenting and editing the emailing code. All the email methods have documentation on the web in some form or another showing how to send html emails.

Also,
sometimes depending on the email component being used and the email client reading the email a link in a text based email will get hyperlinked automatically. For example outlook usually will do that, but it doesn't always in other situations.

Lastly, we have special upgrade pricing should anyone want to upgrade to ASPProtect Version 7. It really has a ton of great features.

Best Regards,

Chris Williams
www.CJWSoft.com

I have been working on this all night long. I have been reading every possible article. I have created an ODBC connection on the server.. which i have never done before? Still nothing. I looked at the machine.config file... i read about impersonating whatever the hell that is... I am really stressed out. I have the 1.1 framework installed.

I read about dsn and dsn-less connections. Is there another way i can connect to the database? Without using a username and pw maybe?

ok... lets forget about all this redirecting business for a minute

when I go to "GP01.asp" directly via your web site I get a big nasty error that says this

Microsoft VBScript compilation error '800a0411'

Name redefined

/protect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^ 

then when I look at what you did in that file I see why

you have this code which is totally wrong because you cannot include the password protection file twice

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<% GROUPACCESS = "*1*" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

it should be

<%@ LANGUAGE="VBSCRIPT" %>

<% GROUPACCESS = "*1*" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

and that is probably the root of this entire problem.. the redirection was working...
but you were sending them to invalid pages with errors

all those pages are wrong...

if you dont see the real error above see this

http://support.cjwsoft.com/code/moreinfo11-1.htm

if you look over the aspprotect 7 installation instructions that is the very 1st thing I tell people to do

hopefully this is the info you need to continue and get some work done

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ;PN=1


The IPN Subscription Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement PayPal IPN Subscriptions with ASPProtect. IPN stands for (Instant Payment Notification). It allows you to set up scripts on your server so whenever a PayPal payment is processed the PayPal server sends info to your server regarding the transaction and vice versa. This is a fully automated process and allows you to charge users for access by the month or however long you like.

The Subscription feature of PayPal handles recurring billing automatically. The PayPal server will communicate with the ASPProtect system and keep everything up to date with users and their subscriptions.

This Support Pack basically gives you an additional signup and registration directory "paypal_sub_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup. New users can register in this directory and sign up for a subscription at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and start a subscription. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via PayPal your system is updated and they will have access.

To use this all you need to do in ASPProtect 7 is enter your PayPal account name into the settings screen. It will be an email address. You'll need a business or premier account with PayPal and you will need log into your PayPal account and turn on IPN in you profile. They make you enter a default IPN URL. We do not use that so if you already have something there leave it there. If you dont have something there you can type in any the full url to any page on your server. It's probably best to send it to an empty ".asp" page or something.

Changing Payment Options

In the "paypal1.asp" file there are some sample payment options set up.

They look like this and you can have as many as you like.

<!-- Begin Payment Option Code -->
<form action="https://www.paypal.com/cgi-bin/webscr" method="post" target="_blank">

<% Label = "Membership (1 Month) $9.99 Recurring" %>
<!-- Begin Form Fields You Can Edit.. See PayPal Subscription Manual For Details -->
<input type="hidden" name="no_shipping" value="1">
<input type="hidden" name="no_note" value="1">
<input type="hidden" name="a3" value="9.99">
<input type="hidden" name="p3" value="1">
<input type="hidden" name="t3" value="M">
<input type="hidden" name="src" value="1">
<input type="hidden" name="sra" value="1">
<!-- Field Below must have 2 commas First two values are optional (access level,groups,user ID)-->
<input type="hidden" name="custom" value=",,<% =User_ID %>">
<!-- End Form Fields You Can Edit.. See PayPal Subscription Manual For Details -->

<!--#INCLUDE FILE="form_data_inc.asp"-->
<input type="image" src="https://www.paypal.com/images/x-click-but20.gif" border="0" name="submit" alt="Make payments with PayPal - it's fast, free and secure!">

</form>
<hr>
<!-- End Payment Option Code -->
 

To really understand what these form values mean it is best to look through the PayPal Subscriptions Manual which is a PDF file you can get from the PayPal Site.

This link was valid the last I checked...
Subscriptions and Recurring Payments Manual

It also may be helpful to use their wizard to create some subscription buttons with different settings and then look at the code generated.

Bascially these are the important ones..

a3 - amount to billed each recurrence t3 - time period (D=days, W=weeks, M=months, Y=years) p3 - number of time periods between each recurrence

The custom field is something we are using to send info from ASPProtect to PayPal.
it allows you to set the access_level or groups access (groups support require the ASPProtect Option Pack)

<input type="hidden" name="custom" value=",,<% =User_ID %>">

or this example where we are setting the access_level to (2) and also giving the user access to groups (3 and 4)

<input type="hidden" name="custom" value="2,*3*4*,<% =User_ID %>">

Here is how it works.
The value setting (red) is essentially and array that can be made up 3 elements separated by comma's

access_level,groups,User_ID

If you do not want to set the access_level or groups access.. then you don't even need to edit the setting.

Values must be separated by a comma even if there is no value and there can be no spaces.  If you didn't want to set an access level or groups there would still be 2 commas at the beginning.  etc etc
Basically there must always be 2 commas but you only have to set last values which is the User_ID from the ASPProtect system.

The 1st value is the access level you want to user assigned to.
The 2nd option is the groups you want the user assigned to. (requires option pack)
The 3rd option is the User_ID which the system takes care of. Do not edit this option. Leave it as <% =User_ID %>
 

ok, well as far as what else to try I already told you..

you need to manually compare all those field settings with the sql script and make sure they all got set correctly...

you also need to tell me what email/name you ordered the application under... before I will continue this support with you.. at this point I don't know if you purchased the application or if you are using the unsupported lite version

You would carefully use the built in features of access to import/export data.

The password for our databases is noted in the documentation. It's pretty hard to miss really. You can also see the database password by looking at the connection string info.

different versions may be different but it is usually "temp" minus the quotes

Line 409:
Line 410:
Line 411:		<authentication mode="Forms">
Line 412:			
Line 413:			<!-- DO NOT CHANGE UNLESS INSTRUCTED TO DO SO -->

Chris -

Long time no talk, which is a good thing.  I have purchased another product from you, ASPVendor.  I am running into an issues.

When I try and remove the image through the image manager, it does not remove it.  Screen shot attached.

2005-10-19_194248_image_upload.zip

Thanks

Just to put an end to this thread here is the solution for anyone reading.

The permissions were ok.

The data connection string never got edited in the "dataconn_inc.asp" file so it was invalid the whole time.

Once that was corrected the application ran.

So really this whole thread was over not following the directions and not editing the data connection string... 

Okay, so I copied the txt file into the export file and tried the import users option and it timed out on me as well. 

Would it be easier to figure out if you were able to look at the iis server?

The Pop-Up Javascript Date Pickers will only show up of your server's regional settings are set to one of two lCID values.

1033 which is English - United States
mm/dd/yyyy date format

or

2057 which is English - United Kingdom
dd/mm/yyyy date format

Many servers are set to run the default LCID which is 2048 so the banner system will not show the date pickers.

This setting can however be easily overwritten when using the ASPBanner system.

or

Session.LCID = 2057

depending on what date format you are looking to use

Save the file and go edit a banner. The date pickers should be there now.

• What kind of encryption do you use with version 7?
• If I purchase version 7 and use it on my site with a new SQL database then migrate the old records from version 6 so I can by-pass the issue with my home-grown Base 64 encryption, do you forsee other issues with the upgrade?

Regarding installation in a subfolder

Though this should be common sense and ASP.NET 101 "so to speak" One thing not mentioned in the docs..


If you do not install ASPProtect.NET in the true root of a web there a key in the web config you must adjust.

it looks like this

<forms name=".aspprotect~net" loginUrl="/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

The way it comes it is valid for a root installation..

lets say you installed the application in folder called.
"aspprotectnet"

the key would change to this

<forms name=".aspprotect~net" loginUrl="/aspprotectnet/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

It should be released sometime late May 2004 or early June 2004 but no gurantees as I am pretty busy right now with some projects.

There will be upgrade instructions and it should be a fairly easy upgrade.

[/QUOTE]

Like I said no guarantee... I have a lot of things going on... it might not even be finished till the end of July... customers will always be able to get it for the difference in price

You have the version listed on the site when you purchassed it.
Version 3.0