Alternate Method to call banners from non ".asp" pages.

<iframe src ="http://localhost/aspbanner/aspbanner/aspbanner_inc.asp?Ban nerZone=4" width="468" height="60" frameborder="0" marginwidth="0" marginheight="0" scrolling="no"></iframe>

Be sure to delete the space in the BannerZone variable above. I am not sure why it is doing that in this post.

You can try calling the banners in an simple iframe like so.
This method should work much better than the javascript method because users with javascript turned off will still see the banners. You also will not have any of the limitations the javascript method has. Iframe is now supported by most recent browsers so it is now a good solution. Here is a chart that shows which browser versions support iframe.

Be sure however to edit the height and width values accordingly as that is very important.

I am using v7 with other software written in ASP.NET. When I include the the "checkfor" and include file, I'm receiving a compliation error.

Here is the include I have on the .aspx file:
<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="../../ASPProtect/check_user_inc.asp"-->

Here is the error:

Hello,

In that version is is not easy to change the values as they were not intended to be edited. You would have to dig through quite a lot of code as those values are hardcoded in quite a few pages. Probably at least 10 or more.

In the pro version there are variables you can change that very easily as that is intended to be easily changed in that version.

The version of aspbanner you have should not matter.

What you are doing here is wrong.

<PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">

PARAM NAME=movie is supposed to link to your ".swf" file.
And thats why all you see is black.

I don't think you quite understood all of that information fully.

Your ".swf" files needs to be coded in FLASH to link to the aspbanner redirect url. You don't change that flash calling code like that.

The ".swf" file links to the aspbanner redirect url which tracks the click and then redirects the user to the Link URL

You basically need to code your ".swf" flash file to go to that aspbanner URL or code your flash file so it can take a parameter for the url it clicks to (like the macromedia article talks about. This has to be done when editing the flash file in the flash editor before the file is saved.

If you dont have access to the original ".swf" to edit it and re-save it.. your out of luck as far as tracking clicks goes

Everything seems to work fine and I thank you very much for you quick response!!!

Great suggestion, routing the banner click through an intermediate page before the destination.  We use Deepmetrix LiveSTATS.xsp V7 and I should be able to configure a filter to capture the stats of the intermediate page.

Thanks for the help!
Lance

look in the "check_user_inc.asp" file

Thank you that did it !!

[QUOTE=cwilliams]I would like to delete the SQL tables and set them up from scratch using enterprise manager and sql query manager and see what happens

If that is ok with you let me know.

Something is wrong like I said...  almost seems like the database is caching old password info from the field.[/QUOTE]

Sure go ahead

My hosting company uses ASPEMAIL - and I am trying to setup the mailing settings on ASPPROTECT - but cant seem to get it to work.   I've tried many different options - here are two that are the closest - but have issues:

1. If I use the settings:

email component: aspemail

Mail remote server: my internal server name

*no smtp authentication

email mail notification - my email address on my internal server

***I get the following results:

       I can get get notified when a new user logs in, email a user from aspprotect user screen if they are in my company and have a valid email -- but I can not send to the outside world - I get an relay prohibited error.

2. If i try to change the setting to use the Hosting Website email server - I get the following results:  I dont get notified when a new user registers, I cant send to internal company people - but I can send to the outside world.

**any suggestions on what to do? I'm trying to work with the people who manage the mail servers - but since I dont know anything about them - its a bit difficult.

[/QUOTE]

The relay error is because when you send emails outside your email domain smtp authentication is required.

I suggest trying to use CDOSYS with the smtp authentication option. CDOSYS is on all servers by default and is really the way to go. Use a real email account and password to send the emails through the server.  Be sure to check smtp authentication for cdosys and to specify all that info for your email account and password in the settings screen.

If you want to know about CDOSYS read my article.
http://www.powerasp.com/content/new/sending_email_cdosys.asp

I have noticed that during the file import, that some of the pictures get messed up.  I can import aroun 150 pictures into different albums, say 3 albums with 50 each.

I have noticed however that some of the get messed up.  What is happening is...the thumbnail will be correct, but after you click it the picture that shows up is one form a different album.

Any cure for this?

ASPProtect and PayPal are fully automated and ready to go.
Accounts will automatically get activated after payment.

We actually do not tell you to put nothing in the PayPal system for the IPN URL. Something has to be there or PayPal will not let you enable IPN. We actually tell you in you PayPal settings to turn on IPN and make up an IPN url because something has to go there. (I think we suggested making a blank asp page on you're site to send it to) It really doesn't matter where you send that but it might as well be a valid page on your site to avoid any 404 errors in your logs when a non ASPProtect payment comes in.

You see, we dont set that IPN url set in the PayPal system because each ASPProtect signup script directory (single payment and subcription) uses it own IPN url and that all gets set on the fly by the aspprotect system. There is a way to overide the defaul IPN url is what I am saying.

Also:
A  lot of people already have something there and we didn't want the ASPProtect system to interfere with things they already had going on.

Hi there,

Just bought ASPProtect 7.0 last week and just got around to installing it. I've gotten through the installation and am now trying to test the (Forgot Password) functionality.

I get the following error when I type in the e-mail (or in some cases the username) and Post the form. 

Error was [11004] Valid name, no data record of requested type

I know that the add user functionality is pointing to the correct database (I see the additional rows via SQL Enterprise Manager) and that the e-mail address I am looking for is in the SQL database. 

Any ideas? Any other information you need?

Thanks,
Toni

Hi Chris,

Thank you for your prompt response.

Our current project requires alot of customization.

Yes, the error is probably a data problem and not due to your code, because we needed to make modifications to the database.  But that's why debugging would be helpful.

Basically our intent to modify the asp protect code stems from the fact that our client doesn’t want certain fields to be recorded or to appear: address, city, state, zip etc…

We are happy to be able to modify the HTML, but we also want to modify some other default behavior, such as which page opens when the "cancel" button is hit in the editaccountinfo.aspx page.

I was able to get it all figured out.  Thanks a lot for your help, I really appreciate it.  I ended up copying the database with the password to the directory and used the user/password connection code and it works great.  I believe it was related to that but I cannot be sure.  Thanks again!

I finally spoke with someone who knew what I was asking for and they set the rights and all is fine.

Thanks for your help. Wish all business' had customer support like here

Hi,

Its just not enough information to go on. I need more details on what is going on. There are a lot of configuration settings in these applications. I really do not know what to make of that screen shot.

My 1st guess is that if you cannot delete a picture that the picture folder does not have delete permissions ??

I also need to mention that I am not sure what this has to do with ASPImage ?

Have you thought about language file so users dont have to go into the code to put it in their language??

When adding a new user I am taken to a form.

There are several "required fields".

First and last names are 2 of them.

This is not needed by me and I need the company name as a required field instead. I work and deal with company names, not individuals.

So, i am unable to add any users due to this.

How can I either do away with the names as a required field or swap the individual names with the company name as a required field?

I have customers wanting to be able to view their own stats, but I need to do away with the required fields to work with my customer base.

-john

There is no way I'm going to spend hundreds of dollars for a thumbnail creation program. Mine is a family web site and all out of my pocket.

Is there any free products that work with Gallery that will create the thumbnails? If not can I create them on my own and link them to the pics? There are tons of Perl based freebies out there.

Steve

Thanks Chris.

Your solution worked!

I will actually explain how to set access_levels and/or groups...

in "users/add_new_account.asp"

When a new user adds themselves to the db thru the registration page, no user id is assigned in the User_id field.  I can't access the page on-line due to an user_id related error on the page.  I must use access itself and add the user id.  After that, everything works as expected.

What have I done?

you dont want to use the virtual smtp virtual server method... you want to use a real remote email server with valid MX records..

ultimately though after all that is going is it is out of the hands of the asp code and it becomes issues other then the code sending the email... regarding to whether or not emails get blocked by certain organizations

For example:
I have many aol users sign up for various systems I have running without issue. I use CDOSYS with my own server mail.cjwsoft.com which has proper MX records set up.

I would also try to determine the difference between blocking and spam/junk email filtering. It is impoirtant to truly know what is going on.
Sometimes adding more information to the body of the emails going out will eliminate the junk mail filters from gettings the emails.

Then you have the various open relay lists that places like AOL use. If your email server or IP sending the email is on those lists for spamming you do not stand a chance. That is all out of the hands of the ASP code.

dsn-less is the way to go..
http://support.cjwsoft.com/code/moreinfo9-2.htm

you also need to use newer versions of the database as the odbc drivers on the server are sometimes very new and no longer work with access 97 databases

I dont know about your error on line 6 when uploading..

as far as the manaully edited import file not working I would really need to see it. There has to be somethin wrong with it's format.

I really need more information and possibly acess to the system to do some troubleshooting...

This is anot a feature anyone has ever had an issue like this with.

"save_pic_desc.asp"

in both the admin and users area needs to be edited

You'll see something like this...

If Len(Image_Description) > 250  Then

just change 250 to something higher.. I wouldn't go much over 500 though as it may cause problems.. I am really not sure.. Changing it higher is done at your own risk.

at this point I would say install a fresh untouched copy in the web in a different directory and lets see if it acts weird from scratch.. the we can go from there.. I dont know what is going on

MySQL Database Setup

Use of MySQL is 100% unsupported as you can see from the site.
http://www.aspbanner.com/mysql.htm

Even still I recently had an encouter with an extremely Jerky person (read the thread above for more on that) and because of him I am adding this tutorial showing one way to set things up on a windows server using the official MySQL tools available.

Let me just say as well that there are 100's of 3rd party tools to work with MySQL databases and many ways to create the database and apply the database creation script. In the past it had to be done via the command line, but now there are a lot of visual tools you can do it with. Furthermore all hosting companies set MySQL up differently and give you access to varius interfaces to manage it which are all different, and that is primarily why I do not support it. How the hell could I support all those different interfaces many of which are totally custom?

The fact is 99% of the people that purchased ASPBanner to use with MySQL have done so without issue and love how it runs. Regardless here is how I set up a working MySQL database on a windows server proving it does indeed run with a MySQL database.

1st of all if you are setting up the server you need to download some things from http://www.mysql.com/ 
(btw: you local developers can install this on XP Pro as well if you like.)

For this article we are going to download the current non beta windows version of MySQL which is 5.0. ALso known as the Windows Essentials (x86) download. It's about 17 meg.

Because ASPBanner uses the MyODBC drivers (now called Connector/ODBC) to connect to the MySQL database you need to download those as well. (Our site flat out says this is required for MySQL use)

So I download those from here. http://dev.mysql.com/downloads/connector/odbc/3.51.html
Version 3.51 has been the current version for a couple years now.
You want the windows driver install which is about 2 meg.

The two downloads should look like this.



Now, on the webserver you run the version 5 setup (mysql-essential-5.0.19-win32.msi) I will guide you through it step by setp.



Hit Next



I am going to choose typical for the sake of this article.

Hit Next



Hit Next



Wait for a bit



I skipped this part.



Choose to configure the MySQL Now

Hit Finish

Hit Next

I am going to choose Detailed Configuration



Since I am on a development machine for this install I am going to choose Developer Machine. For a Real Server choose one of the server options.



For this article I am going to choose Multifunctional Database: You may want to pick one of the other options. That is up to you. ASPBanner will work under any of the scenarios.



I am going to leave the location at its default

Hit Next



Since this is a development machine these options are fine.

Hit Next



These options are fine as well.

Hit Next



Standard is fine for my development machine.

Hit Next



I am going to choose both of these options. The 1st one is Important and should be enabled on a real server so MySQL always runs. The 2nd is not so important.

Hit Next



Set the "root" password and do not forget it. You will need it to manage your MySQL server. I do not advise creating an anonymous account unless it is a development server and you just do not care. Whether you enable root access from remote machines or not is up to you so do some research on that. For this articles needs I am not choosing it.

Hit Next



Hit Execute and wait



If all goes well you will see this. (I actually got an error message about not being able to connect... I went to to Administrative tools/services and restarted the MySQL service and hit retry which cured that... it probably only did this to me since I have installed this before.. new installs probably will not have any trouble)

Hit Finish

Your done.. You just installed the MySQL Server (TIP: its usally a good idea to reboot and make sure the MySQL servce is running by default)

Now, moving on..

Lets install the MyODBC drivers.. (now called Connector/ODBC)

This one is a bit of a no-brainer so I am not going to go into detail.
Just run (mysql-connector-odbc-3.51.12-win32.msi) and run through all the defaults until it is done.. Choose typical when that comes up.

Your done setting up MyODBC on the server. If its not your server I guess you don't need to worry about installing all of this as its your hosts job to do that.

Hello,

What is the difference between the paypal_sub_signup and the paypal_signup directories?  Also, I know it depends, but what directories and files can I delete from my web server if I am not using them?  I copied the entire set of files that came with the program over to the webserver and I am concerned that there is too much out there.

Jess