Hi. Chris.  I'm not a programmer of any sorts, so I am not comfortable plugging in the changes you suggested and not knowing for sure if it will "break something somewhere else".  If the programmer tells me "you have been warned", its a pretty good sign its a no win situation. If you don't know, theres no way i can know.

I saw in the code where you mentioned the changes. I don't see where it mentions the last name is required either, but the bottom line is it does require it it the actual new user form.

Thanks anyway Chris. I'll figure something out.

-john

One last thing..

This is bad

http://www.bones.myftpsite.net/rfamilystuff/pictures/

there are .asp files in there people can run that you dont want people running..

u should delete the asp files in there or turn off directory listing...

take care,

CJW

ok, I am home.. missed flight.. just got home an hour ago.

lets see.. I really need more info...

For starters are you using the delayed stats feature ? that is expirmental and could cause that problem

ok, then I need more information.

Was the code changed ? Thats the big one. If it worked and now it doesn't something must have changed. Things just don't stop working on their own. I would try putting the original files back in there for everything but the config and dataconn files just to make sure and see and if it works with the original files. (back up your old ones 1st so you can copy them back of course)

Also, perhaps PM me the site info so I can go look as well.

Hello,

no default setting for something like that... what your thinking about doing is on the right track I'd say

sorry.. you just said above you were using XP SP2 so that is the article I referred you to as I just assumed you were talking about your local web server

here is my article on permissions regarding server 2003
http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

I can look at your installation monday if you like. In about an hour I leave for a wedding thingie and I wont be around again untill monday around noon

Try the uploading using VBSCRIPT method just for the heck of it. Perhaps there is an issue with the installation of the dundas component.

CJW

also.. the log out page shouldnt really need this
but you can try adding this to it where all the other ones are set to nothing..

<% Session("Groups") = "" %>

Understood.... can you point me to a place where there are other methods of calling banners?  Do you mean not use Flash?  I am new to this and will need some pushing over the cliff!

Thanks

Dave

Humm.. that should have worked fine

why are you getting a "OLE DB" error I wonder ?

I need more information. 

Database being used and version ?
Server OS Version?
Connection String being used ?

etc etc

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

I have never heard of such a thing...
If the settings are enabled for the web it should work.
That is, as long as your include file syntax is valid.

I run my own windows 2003 server (you are on it now) so I should know

for troubleshooting

try a very very simple example... like a file in a folder.. with a server side include to a file under it

and see if that works

use real simple asp files with nothing crazy in them... and an include like this

<!--#include file = "../myfile.asp"-->

Which page should a user see next after completing a Paypal transaction?  Where do I set that?

Nick

You might just learn something and actually get your project finished before 2010

your over there hacking away on your virus infested WaReZ machine

LOL thanks for the good laugh-- i guess its time to do some reading and making my own mods to the program..

btw i never insulted cafrepress.. not sure where you got that from- just advised that what they have is exactly what i want to have done. How much for your service?

Hi,

Sorry, but if  ".asp" pages download instead of run on a server then that means ASP is not working on the server and is not configured correctly. That is about as low level as it gets and it is really the hosting companie's responsibilty to sort that one out.

It is totally a system admininister's job to make sure that sort of thing is working. If this place supports ASP they really need to fix that for you. There really is nothing  I can do for you until ".asp" pages at least run.

As for the Free install... that is no problem. Of course you need to get the hosting company to fix the web before I can be of any help. There is more to that problem then permissions.

For starters I would make a simple ".asp" page with hardly anything it (even some simple html text is fine) and ask them why it is downloading instead of executing and to please fix things.

MSACCESS 2000

server: windows

option pack: yes (after the install I have this problems with groups and edit users )

host permissions: yes

MESSAGGE:
Active Server Pages error 'ASP0113' Script time out/password_admin/groups.asp The maximum amount of the time for a script to execute was exceeded. ...

Has anyone used the aspmail function to send and recieve emails from within your forms? If so what string did you use in the aspmail_host field in the connections database.

thank you
adam

Excellent

  Much thanks, the duplicate incl's I spaced on and should have caught.  The hidden form variable was a key issue.  Thanks for the syntax and the help.  Now I get this page together. j  As a note - I got faster results by dropping my timeout to 3 minutes temporarily while progging and cleared browser cache between tests.  Thanks again.

I just moved servers and now my "code" ads are giving me errors...

"google_ad_width" is undefined.

I have tried adding the width and height... taking it out.. all the basic stuff.

Any ideas?

TIA  

humm.. their FAQ is interesting...it looks like some sort of .NET configuration issue regarding security policies like you mentioned

Thats one of the big problems with hosting .NET. Some hosting companies just do do some oddball things. ASPProtect.NET works under default conditions but when hosts go around locking things down to the max there is bound to be trouble. This is the 1st I have heard of this.

Now, ASPProtect.NET does use the "System.Data.OleDb" and "System.Data.Odbc" which your host says they block because they require full trust.

All I can really say at the moment is go with a hosting company like www.alentus.com or www.maximumasp.com that does not restrict your .NET abilities so much.

In the meantime I am going to ask John Evans what he thinks about this.

Help!.. I need to export the username and password fields to a mail merged letter so everyone knows their username and passwords. However whenever i access the database or do an export. The passwords showup as encrypted. Is there a way to access the list, un encrypted?

thanks

I am running Windows 2000 server. I do believe asp.net IS installed as I have the .NET 1.1 framework installed.

Funny about the bounce backs. I am at about 10% of my limit, which I control as I am the network admin. I'll check into that.

I wonder if this could this be a FrontPage problem. I deleted the skins folder and re-ftp'd the original one that only contains default and Solid Black. I logged in and tried to change it back to default but it won't. I'm going to try making this folder a Frontpage subweb to see if that makes a difference.

Al

1st off, what application is this in reference too?
This question should be under that application's area in the forum.

2nd, really need more information and details. There are many ways and methods to send emails and they can all effect what gets delivered and what does not. All on an email server side of things. (I always recommend using the CDOSYS option using SMTP authentication with a real external email that has valid MX records) see my article...
http://www.powerasp.com/content/new/sending_email_cdosys.asp

3rd, your not telling me how many users we are talking about. ASP is not a very efficient way to send emails and extremely large amounts of users should be sent emails in a different way then from an asp application. It is just the nature of the technology being used. Some of different emailing methods the application supports may or may not give you better results. It is really best to experiment though honestly the option I mentioned above is always the best in my experience.

4th, if you are not getting a timeout or a scripting error than the ASP part of things is making it through the amount of users. You have to remember that often time emails that get sent out from web sites end up in junk filters for whatever reason. That is just another fact and why it it is usually best to send out serious newletters using a stand alone application like WorldCast or something.

I am doing a lot of guessing here because you really did not tell me much. I also still am not sure what application this is in reference to as 3 of my apps have newsletter features of sorts.

Hi,

I basically explained how I thought that might work here where I went over everything I could think of and suggested you download the free version and see if you could get it working
http://support.cjwsoft.com/code/moreinfo488-1.htm

The part about using the alternate scenario involving querystring info from a url.

I have never done anything like that and that is why I told you what I knew and suggested you try it with the free version...

I did everything mentioned here but it do not work ;(

SQL Database Creation (NEW INSTALL)

If you are creating a new database do so using SQL enterprise manager.
Create a new database called whatever you like and keep all the default settings. If using an existing sql database skip that step.

Now open up SQL Query Analyzer

unzip the following sql script and open it in query analyser.
2005-02-20_132116_aspprotect_v7_sql_script.zip

VERY IMPORTANT
On the drop down box at the top right make sure your intended database is selected. Otherwise your changes may effect the wrong database in your SQL server.

Then load the script  into the Query Analyzer.  Click the green play button at the top. If everything goes well the response should read something like this.

******************************************************
(1 row(s) affected)
******************************************************

If so the tables have been created in your existing database.

Now make sure an existing or new SQL user has (public / datareader / datawriter) permissions for the new tables. You will be referencing this user in the asp code connection string so this user must be set up correctly. You may need your SQL server admins or hosting company to help you on this step as you may not have access to do this. You may not need to create a user and set permissions as the sql user you were logged in as to use query analyzer may by default get the correct permissions on anything you create.

Regardless, as you can see from this screenshot I made a SQL user called "aspprotectuser" and proceeded to set the permissions for that user. Under database access giving him (public,datareader, and datewriter permissions).


Now, in the ASP files provided with ASPProtect edit "dataconn_inc.asp" with a text editor and modify the connection string info. Be sure to change the info to match your server,username, and password.

Below is an example of valid connection string.

ConnectionString = "Provider=sqloledb;Data Source=poseidon;Initial Catalog=aspprotect;User Id=aspprotectuser;Password=temp;"

The  "Data Source" setting is either the Network Name for the SQL Server or the IP Address. For local servers you can sometimes use an IP of "127.0.0.1" or the name of the local server.

"Initial Catalog" is the name of your database.

Now, in the ASP files provided with ASPProtect edit "dataconn_inc.asp" with a text editor and set the DatabaseType variable to SQL like so.

DatabaseType = "SQL"

Hi,

That is not enough to go on. I need details in order to help.

perhaps the filesystem object is disabled on the server ?
or some sort of script blocking is running and causing a problem ?

other than that I can take a look if you put it up on a live server.

Upgrade from V6 to v7.x with an MSACCESS DATABASE

1st of all, backup your existing ASPProtect files and database before performing this upgrade. Please be really careful while performing this upgrade. Version 7.x  is a highly advanced application compared to any previous versions. CJWSoft under no circumstances is responsible if you lose information or have website downtime.

BOTTOM LINE: (PERFORM THIS UPGRADE AT YOUR OWN RISK)

To do this upgrade you're going to need to have the Microsoft Access Application.
To work with an Access .mdb file it can not be newer than the version of Microsoft Access you are running.

That being said, on with the upgrade..

Open you're existing Acccess Database up in Microsoft Access..
You should see this something like this.



By right clicking on then choosing rename
Rename "Users" to "ASPP_Users"
Rename "Groups" to "ASPP_Groups"

If you do not have a "Groups" table do not worry about it right now.

Now right click and DELETE the Config Table.
Yes, delete it..

You should now see this. (with or without the "Groups" table)



Now, right click on "ASPP_Users" and go into design view.
It should look like this.


Rename the "Password" field to "Old_Password"
Be sure to spell it perfectly using the Underscore
It will look like this.


Now scroll down to the bottom a bit It should look like this.



Now..

If you have a "Groups" Field... leave it alone
If you do not have a "Groups" Field add one and make it a memo field.

Now, we are going to add a few more new fields.

Add a field called "Redirection_URL" make it a "text" field with 150 field size
Add a field called "PayPal_Subscriber_ID" make it a "text" field with 100 field size
Add a field called "Newsletter" and make it a yes/no field
Add a field called "Password" and make it a "text" field with 100 field size

It should now look like this.
(you do not need to worry about the field descriptions.. that part is optional and only seen when working on the database)



Now close that window and save the changes..

Your now going to open up another Access Database while still leaving the one you have on your screen open. You going to open up one of the new databases that came with v7.x. This database has some info we are simply going to copy and paste.

You'll want to open it and put it side by side on your desktop like so.
(the old database is on the left.. the new one is on the right)



Now, for the fun part.

On the new database to the right.. right click on the "ASPP_Config" table and pick "Copy"

Then move your mouse over to the old database on the left. Right click in the open white area and click "paste"

It will ask you for a database name. Type in "ASPP_Config"
Leave "Structure and Data" checked and hit OK

Your old database on the left should now have a nice new "ASPP_Config" table.

OK, now for the "ASPP_Groups" table

If you already have a "ASPP_Groups" table in your old database you are done.

If you do not have one your going to copy and paste the table from the New Database to your old database just like we just did with the "ASPP_config" table.

Your old database should now look like this.



Now, you are done upgrading your database from within Microsoft Access.

The existing passwords still have to be encrytped and moved from the "Old_Password" to the "Password" field

To that we have a special page we run in the application that will take care of that.

So, for now... go install the application, but using the database we just created.
Follow these instructions for the most part...
http://support.cjwsoft.com/forum/forum_posts.asp?TID=181& ; ;PN=1

When you get to the part where you finally get into the admin area and need to make an admin account you will notice that your existing user database is there but none of the users have passwords if you look at them in the edit screen.

That is normal. Simply do what the instructions say and create and admin account using a username that does not exist..

Then log off... then back in as that new admin account. If that works you are ready to convert the passwords.

This part is very easy.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Replacing the part in blue with your website info.

Once you get the page running you will see a login prompt and one form field just like before with the "get_me_in.asp" page

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see a page telling you to click here to encrypt the passwords and copy them over.

So do what it says... dont click more than once and wait.

Eventually it should say it is finished. So go log in to the admin area of the system using the new admin account.

Now edit some users but dont save... you want to see if the passwords are showing up. If they are the conversion worked. If you see nothing or a garbled mess it did not work and you made a mistake during this whole process.

If things went well backup and delete the conversion file below.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

You do not need it anymore.

Once you are positive every thing is running smoothly and everyone's passwords are ok you can go in and delete the "Old_Password" field as well.



If things didnt go well.. try again from scratch and go slowly.
If they still dont go well get ahold of us for help.

We are here to help, but if you really want us to we can be hired to do the conversion.

sometimes those emails take a bit... all depend on wht you are using to send them and whether a pickup directory is involved

as for the other I do not know.. PM me the site details I can look

if it is a 2003 server parent paths must of course be enabled.. its a requirement of aspclassifieds