where is your site ? I'll taka a look

Hi Chris

After turing off the delayed stats feature the internal errors have stopped and it still serves banners, although I havent checked the logs yet. I will and post any errors.

I left my test page up last night at say 11pm serving 4 banners of different sizes rotating every 15 seconds, now at 9am the page is just displaying 1. If I refresh the page they all reappear.

Regards
Colin

Dear Christofer

I already have send you the details you asked me for. Please let me know if you have received

That would not happen unless you added a target to the login form or you're code had a base target set.

Like so..

<base target="_blank">

I would really need more detailed information. It's nothing the system does the way it ships under normal circumstances. For example you shouldn't see that behavior in any of the example protected ".asp" pages

that is unless you have something odd going on with your browser settings or you made changes to the login form or code around it causing it. (or you are using frames and dont have some of the targets and what not set correctly)

My guess is that it has to be something you added or did, but I really need to know more to offer more than that.

OK, I updated the server with the SP 8 Jet updates and this had no effect.

Then I loaded the asptest file and put in the correct path. The results were:

Failed: Database could not be connected to....

Error reported from server:
Error source: Microsoft OLE DB Provider for ODBC Drivers
Error number: -2147467259
Error description: [Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x784 Thread 0x854 DBC 0x2101014 Jet'.

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ; ; ; ; ; ; ; ; ; ; ;PN=1

The 2Checkout Support Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement 2Checkout Payments with ASPProtect. You must be using version 2 of the 2checkout system. They are phasing out version 1 regardless so everyone will be using version 2 very soon if they are not already.

THIS IS NOT INTENDED OR DESIGNED TO USE 2CHECKOUT SUBSCRIPTIONS. (see bottom of this thread for more info on that)

This Support Pack basically gives you an additional signup and registration directory "2checkout_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup in general. New users can register in this directory and pay for membership at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and buy additional membership time online. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via 2Checkout your system is updated and they will have access.

The 2checkout pack is NEW.. and was released on March 19, 2005. If you don't have it and would like it please just ask.

To start using this edit the "2checkout_signup/2checkout_config_inc.asp" file

You will be entering your 2Checkout Account number in that file as well as the URL you want a user to go to after payment. It is all commented in that file. (There is also a testing variable you can set to True if you want to do testing without real charges being applied)

After editing that file run this page.

http://www.mysite.com/2checkout_signup/show_postback_path.asp

Replacing the part in blue with your website info.

It will report back that postback url you need to use in the 2checkout system.

Log into your 2checkout version 2 account and under the "look & feel section" enter that postback url for both the "Approved URL" and the  "Pending URL"

Trust me: You want the URL there for a pending URL because the 2Checkout system is quite random and 95% of the payments that come in go to the pending URL and end up being legitimate sales. (at least for me they do)

Now make sure the Direct Return option on that page is on as well. 

If set to Yes buyers will be immediately directed to your URLs below once they click the Complete Order button. If set to No the buyers will have to click a button to return to your URLs below.

Save that page... and leave 2checkout.

Now, delete this page from your ASPProtect setup.
http://www.mysite.com/2checkout_signup/show_postback_path.asp

It's a minor security risk and is no longer needed needed.

The basic setup is finished. All you have to now is set up payments options the way you want them.


Changing Payment Options

In the "2checkout1.asp" file there are form options set up.

They look like this and you can have as many as you like.

<option selected value="30,9.95,3,">30 Days, 9.95</option>

In this option... A user has the option to purchase 30 days for $9.95 and he will be set to Access Level 3 when payment in completed.

Here is how it works.

The value setting (red) is essentially and array that can be made up 4 elements separated by comma's
They must be separated by a comma and there can be no spaces. In this example the 4th value was not used but the last comma must still be there. If you didn't want to set an access level and left out the "3" there would 2 commas at the end.  etc etc
Basically there must always be 3 commas but you only have to set the 1st 2 values which are days and price.

days,price,access level,groups

The 1st value is the amount of days.
The 2nd value is the price for the amount of days.
The 3rd value is the access level you want to user assigned to.
The 4th option is the groups you want the user assigned to. (see PayPal subscription thread for examples of specifying group info)

Now, the label for the option in (blue) can say whatever you like.

(Capcha Security Image Mod)

This mod will add a Capcha Security Image to the registration signup form.



Instructions:

Download the latest version of the ASP Security Image Generator from this site. http://www.tipstricks.org/

Unzip that download and copy "aspcaptcha.asp" and "aspcaptcha_distort.asp" into the aspprotect "users" folder.

Now edit "users/register.asp" with a text editor and add the code shown below in blue. The code to add goes near the bottom of the form right above the submit button. Just add the blue code. The code around it is shown to help you find the area of code where it gets placed.


    <tr>
      <td valign="top" align="right"><font face="Arial" size="2"><strong>
  Newsletter</strong></font></td> ; ; ; ; ; ; ;
      <td valign="top">
  <input type="checkbox" name="Newsletter" value="True" checked>
  <font face="Arial" size="1">Do you want to be subscribed to the
  newsletter ?</font></td>
    </tr>

    <tr>
      <td valign="top" align="right"></td>
      <td valign="top">&nbsp;<img src="aspcaptcha.asp" alt="" width="86" height="21" />
   <font face="Arial" size="2" color="#000000">Type the characters shown in image for verification.</font><br>
   <input name="strCAPTCHA" type="text" id="strCAPTCHA" maxlength="8" /></td>
    </tr>

    <tr>
      <td colspan="2" bgcolor="#FFFFFF">
        <p align="center"><input type="submit" value="Register"></p>
      </td>
    </tr>


ok, now edit "users/add_new_account.asp" with a text editor and add the code shown below in blue. Just add the blue code. The code around it is shown to help you find the area of code where it gets placed.

If User_Custom6_Used = True Then
 If User_Custom6_Required = True Then
  If  Custom6 = "" Then
   ErrorMessage = ErrorMessage & Server.URLEncode("You need to enter a " & User_Custom6_Name &".\n\n")
  End IF
 End If
End If
 
 strCAPTCHA = Trim(Request.Form("strCAPTCHA"))
 if strCAPTCHA = Trim(Session("CAPTCHA_" & Session.SessionID)) then
 else
  ErrorMessage = ErrorMessage & Server.URLEncode("You did not type in the verification info correctly.\n\n")
 End If 
 
If ErrorMessage <> "" Then
 Response.Redirect "register.asp?" & Request.Form & "&ErrorMessage=" & ErrorMessage
 Response.End
End If

Your done. You just added a Capcha Security Image to your signup form. If you would like a more distorted image that is more difficult for an automated program to figure out change the image tag to call the "aspcaptcha_distort.asp" page instead. It will look more like this.

This is amazing. You replied to question within minutes. Thanks for showing such a professionalism.

Hi. Chris.  I'm not a programmer of any sorts, so I am not comfortable plugging in the changes you suggested and not knowing for sure if it will "break something somewhere else".  If the programmer tells me "you have been warned", its a pretty good sign its a no win situation. If you don't know, theres no way i can know.

I saw in the code where you mentioned the changes. I don't see where it mentions the last name is required either, but the bottom line is it does require it it the actual new user form.

Thanks anyway Chris. I'll figure something out.

-john

I downloaded the skins, ftp'd them to the skins folder and can see them in the list of available skins. No matter which one I try to apply it keeps solid_color_black.

Al

I believe what happened is we received the older copy of ASP Banner iwht our purchase of ASP Protect and were notified of a free update to download aspbanner_unlimited_v8.2_feb_26_2005.zip which we did, and that's the one i recently put on our site.

  Sounds from your reply that something technical is going on to the point where I will have to hire one of our Web consutants to dissect for us.  We'll try again and track our issues and send another request for information when we can show you a specific example of what is happening.  I'll be in touch.

Hello-

I'd like to set up the system to redirect to a landing page (say home1) after the user logs in.

I have looked at all the documentation and can't find something that explains how to do this. I am thinking that I can set up a log in as the default in my root directory that will have a form with an action=check_user_inc.asp. I have looked at the code there but cannot find a place where I would place a redirect to home1.

Help please

Thanks

Ok, I started the database tables from scratch. I did everything using sql enterprise manager and query analizer..

Same thing happens... certain passwords just do not work.

So I did a lot of testing and I have come to the conclusion that this has something to do with the regional settings of that SQL server.

Here is an example.. see the screenshot below.

Username "admin" password "petepetepete"

The top query done in Enterprise Manager is valid and shows the user.

The bottom query is also valid but it does not show the user.

And that is exactly what is happening from the ASP codes point of view.

Now, this means that even though that encrypted password is getting saved to the databse correctly this particular SQL server just cant deal with it from a QUERY.

It works fine on two different SQL servers that I have. It's just got to be something regional related like unicode characters not being dealt with correctly or something odd like that.

I tried changing the collation data for the "Password" field type on that SQL server and it looks right. I don't know what else to do but it is something about that SQL server. There may be a way to change the regional setting through the connection string but I cant find any articles on that right now.

One solution I have for you to get this working there is to eliminate the encryption factor then I dont think you will have these issues.

It's either that or find another SQL server with US type settings or use MSAccess. ASPProtect runs nearly as fast on Access as long as you do not have over 10,000 users or whatever. The system hardly ever accesses the database so it performance under MSAccess is always good.

Let me know what you want to do. I can shows you how to eliminate the encrypytion factor if you want to try that. I think if I make you a custom version of the RC4 function you can just replace that and then the system will use plain passwords.

Your call..

Is there a way to know if it is a SQL server with IIS5? My database type is MSACCESS.

Thanks!
Rhona (rookie)

Below is the email I received when testing the self-registration. Does anyone know what setting I configured incorrectly?

I received the email to confirm the registration but the link to activate is invalied.

Thanks!

Your registration still has to be validated.
Go to
?u=bubbaj&v=4579
to verify your registration.

hi,

no.., not unless you come up with some clever way to handle it on your own
http://support.cjwsoft.com/code/code_info.asp?TID=369&KW =https
read 2nd to last post

The way ASPProtect ships it is designed to either be in http:// the whole time or https:// the whole time.... (there curently is no solution from me allowing going from one to the other)

sorry

I appreciate the offer to beta test... but its really more a matter of me getting it ready..

I have a lot done.. but a lot of things are hard coded to only work on my machine and some things have not been sorted out. Giving it to someone else to test would be a waste of time at this point as I they probably couldn’t even run it.

Lately the reason this project has fallen behind has all to do with my main webserver where I collocate.

1st it got compromised (we think by certain competitors who are always up to no good)... then windows 2003 server which I decided to go with on the new server gave me random problems... then the Cisco hardware firewall was acting up and making the sites run slow....then SQL server attacks on port 1433 from Korea when I took the firewall down....and as of the last few days I think the server just needs a new power supply. I swear for the last 2 months I have spent more time administrating my servers than working on code. Yesterday it was locking up every 30 minutes. There have been a lot of days like that and it takes up all my time until I get it situated.  Especially since its over 100 miles to the collocation center. The APC unit I installed that allows me to remotely cut the power to hard reboot is a life saver.

Fun... I tell ya... and expensive.. (hardware, software, lost sales, and time) I am pretty much completely broke at the moment. It has been a very expensive few months.

But I like running my own servers... I run dns servers, email servers, sql servers, web servers.. I do it all. It's keeps me in touch with the latest software/hardware. Regardless , my servers ran well for years and they will again.


anyway.. hopefully I can actually get a new version of the photo gallery out before the month is over. It will probably be the last classic asp version. The version after that will most likely be ASP.net.

I am trying to find out where I can enter the ttle for the application.

There is a variableor field called App_Name into which it would be good to insert a generic name. Can this be edited?

I have searched high and low but cannot find anything to do with it.

You have old code I think.

It's probably because his password used with your encryption key by chance creates a single quote and messes up the database query

A notice went out about this. I will PM you the latest download with the updated files.

Well. fontpage publishing is evil. That you have found out.

Do not use it. It usually wont work right when running asp code locally and also at the server because of differences with the paths and virtual directory structure. etc etc etc

You can definetly use frontpage to connect to the web site live and drag and drop files into it/edit them... but the sooner you stop using the publishing feature the better off you will be.

Yes, as long as each installation is in in it's own web site.
(or at least in it's own application in IIS)
Meaning you could have 5 directories in your site each with the app installed as long as each directory got set as an application in IIS.

Remember, a license must purchased for each running install except for development reasons on local machines.

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

Hello,

I really need more infomation..

for starters

what is the server ? iis4,5, or 6 ?

what is the version of aspbanner.. aspbanner standard or aspbanner unlimited ?

what was the error message before you removed the "on error resume next"

was the sql database created using the sql creation scripts we provide as that is VERY important.

and lastly what are the the regional settings of the server ?
what is the date format ?

(Password Expiration Mod) for ASPProtect Version 7.x

This Advanced Mod requires decent knowledge of Databases and working with ASP. I originally wrote something like this for a customer on a custom project. I then took the time to re-write all the code from scratch so it could easily be plugged in to the current version of ASPProtect as an option. All in all this mod took me over 15 hours of time to develop and will save you a ton of time & money if you were planning on writing something like this on your own. Some parts of this were so difficult to get working that I would never have written this code if I was not paid to do so. (The encrypted array that rotates through the last 12 passwords was quite frustrating to get working)


 
The price on this is 19.95. I am not incorporating this into the base product because it makes things more complicated and isn't for everyone.

Purchase Page

Security is a big concern and making your users change their password every so often is a good idea. Keeping track of previous passwords they used and making them choose something they haven't used before takes the concept even further.

This Mod will add a password expiration date to the application. When the password expiration date is hit the user must confirm their old password as well as pick a new one before they can log in again.

There is a new password expiration directory where they must choose a new password that has not been used before. The new password must be confirmed during this process. (It remembers 12 old passwords the way it is coded) The old passwords are stored in the database in an encrypted array.


Directions:
Back up your existing ASPProtect installation.

Add two new fields to the "ASPP_Users" table in your database.

For an MSAccess Database

Password_Expiration_Date (Date_Time Field)
PreviousPasswords (Memo Field)

For a MSSQL Database

Password_Expiration_Date (smalldatetime)
PreviousPasswords (nvarchar 160 characters)

once that is done

Copy all the new ".asp" pages into your site.


Edit the "PasswordExpirationURL" variable in the "check_user_inc.asp" file

It needs to be the full URL to to the "change_password/default.asp" file


Now edit the "change_password/processchange.asp" file

There are 3 variables you can edit.

PageSentToAfter = "http://localhost/aspprotectmods/password_admin/default.asp"
PassMinLength = 4
PassMaxLength = 8

The "PageSentToAfter" is where you want them sent to after they change the password. It can be whatever you like.
If it is a protected page they should automatically get logged in with the new password they just changed to which is nice.

The other two values should be obvious.

That's it...

Just remember the password change thing is not used in the admin area...
You could easily add code for that on your own though by looking at the the password expiration code I added to the publics "check_user_inc.asp" file

Also:
You will see a new field to edit on the user edit screen for the Password Expiration of course. 

Glad it worked

Chris,

When I set up a test user name it does accept name and passwords and the passwords are encrypted, no problem there.

All I want to do is to restrict access to the protected pages to the members only. Only those users will be accepted and allowed to view.

I have entered all of thier names, address, phone number, email and company in the database, which is still named ASPProtect_access2002.mdb and in the fpdb directory of wwwroot. To get it there I uploaded via FTP.  I hope I expained the situation well enough.

Everything is running fine.. I can read ads... reply to them. but when I click sign in or register.. I get a server error.

Any suggestions

Thank You

Just wanted to say how much I like the program! I hunted for days and finally purchased a Perl based product. After several days of goofing with it I gave up. ASPPhoto worked right on first install!!!!

Way to go!

humm, I dont know then..

If you want PM me your site info and I will go in and troubleshoot.

Frontpage or frontpage access, either way

and also the site URL

Hi Chris:

Is there a way I can include the username and password in the URL of a protected page to gain access to a that page without going through the log-in page?

I'm not quite sure what the syntax would be in the URL.

Warren

Our webhost set the permissions, but the error is still there, so that is obviously not the problem.  We now have both our webhost and our asp support technician trying to figure out the problem and everyone is stumped.  Can you please provide us with the following information to help us out:

1) what is the name of the file that sets the connection string?

2) what is the name of the file, if it is different from above, that sets the password of the database?

thanks

If you run asplistings auto in its own folder with its own application in IIS. Connected to its own database.

And you run your other version of ASPListiings in its own folder with its own application in IIS. Connected to its own database.

You will have zero major changes to make to anything... other than what you did above..

But remember theyare the same app and share a lot of thing including sessions and application variables.. that is why if they are installed in the same domain each one needs its own application set in the IIS console so they run seperately of one another.

hello,

There is no built in option. You would have to add code to do that.
Its not difficult but custimization like that is not something I support.

Yes, thats cool.. post it here for sure.

Also, the way you allowed for your search engine is clever and probably was the easiest way to go.

You could do the same thing with the IP. Much easieri than the way I was thinking of doing it.