Blog Entry: 3/25/2006 4:56:07 PM
I encountered a problem that I haven't been able to solve.
I'm trying to get .pdf files to byte serve (page-by-page load in the browser)
but unable to do so. I've narrowed it down to stream download file where it
creates the header object. I haven't made any success with the changes I've
tried. Any help would be very nice.
This maybe useful:
http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/act/htm/actml_ref_href.asp
, So do I just replace the four folders that came with aspprotect with the four (in my case domain directory) folders in the patch or just move the files?,
Hi, Its just a generic error that really doesn't mean much of anything except that something wrong with your data connection.
http://support.cjwsoft.com/code/moreinfo27-1.htm
could be invalid permissions on the database folder... could be any number of things
when setting up your connection I suggest going dsn-less.
http://support.cjwsoft.com/code/moreinfo9-1.htm
It is better/faster and also a lot easier to set up.
, [QUOTE=afifm]
I was actually able to do similar thing by allowing our dedicated search engine to access the site unchallanged.
<%
If Trim(Left(Request.ServerVariables("HTTP_USER_AGENT"),11)) = "MYPASSWORD" Then
SearchFlag = True
End If
If SearchFlag <> True Then
If Session("Access_Level") > CHECKFOR or Session("Access_Level") = "" Then
%>
<!--#include virtual="/Auth/check_user_Code.asp" -->
<head>
<title>My Title</title>
</head>
<body>
My Protected stuff here
</body>
</html>
For this to work, the search engine must pass the PW to the web site. I just was not sure how to do the same thing with IPs. I will play with the code and see what happens. If it works, I will post it here to help others, if this is OK with forum rules.
Thanks,
Mo
[/QUOTE]
I just added couple of lines and it works fine
If (Request.ServerVariables("REMOTE_ADDR")) = "xxx.xx.xxx.xxx" Then
' Session("PasswordAccess") = "Yes"
SearchFlag = true
End If
,
Flash files cannot track clicks unless you edit the original flash file to link to the aspbanner system redirect URL.. feeding it the correct ID of the banner.
When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner.
The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though)
Really the best way to show it is with an example as seen below.
Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.
All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser,
The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser.
In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.
On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.
http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html
This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code.
cwilliams38085.095150463, I am an experienced ASP developer. Can you tell me whether this would be a very involved process, or whether it is pretty straightforward? I don't yet have a merchant account, so I am not yet familiar with any aspect of accepting credit cards online.
Thanks.
, Hi there...
I'm using the gallery script with ASPImage for uploading and resizing.
I bought this script and the componant for the the auto-thumbnailing
feature, and it is indeed uploading and resizing and creating a
thumbnail.
But the thumbnail is *tiny* at 64px wide. I need to change the width,
but I can't find anything in ASP Gallery or ASPImage to indicate where
that width is set. Can anyone help?
Thanks!
, Can I suggest you have changed a code to stop this or you have a privacy software stopping your visits to add 1 to the counter. Has anyone tried to visit the album or just you. If you send me the link I can sus it out for you,
Hi Chris,
Alright. We figured out how to work with both C# and VB, by creating a separate VB web project in VStudio, and then passing the aspprotectnet.dll to the C# project.
Ok. I have another question:
How can our code determine the identity and user_id of the currently logged in user:
Is it Session["User_ID"].ToString() and Session["Username"].ToString()?
thank you
, If I also password protect the pricelist pages then someone will have to login twice.
nobody should have to log in twice... ?
session variables keep track of access... once your in - your in and you can browse to and from any password protected pages you like
If it is making you log in each time then cookies are most likely disabled.. session variables requires cookies being on to work.. cookies being on is a requirement of aspprotect and is how Formed Based Authentication works..
let me know if that is the issue there...
you shouldnt have to be logging in more than once per session
Thats the whole point of the application...
, How do I change the character length for the description field?
, ok, here is what is going on
you are password protecting an ".asp" page that requires querystring info to run correctly (example - "somepage.asp?ID=3"")
that is something I never intended anyone to do.. while it does handle and repass the querystring info along during successful login it does not re-pass that info during a failed login as you have found out
this is all by design.. the only reason the system re-passes the querystring info at all is because I wanted to make it smart for the sake of the remember me/cookie feature.. so if someone was using that and bookmarked a page deep in your site with querstring info...then when they went back to that bookmark they would get authenticated and still see the page as intended with the querystring info in tact
it was a nice feature never intended to handle any situations other than what I just described...
now...
notice the url in the browser after failing a login.. then logging in successfully.. it is missing the querystring info
that more than anything is what is going on.. browser caching can cause some confusion when dealing with this because the browser likes to return you to the page minus the querstring info... when that happens a simple browser refresh at that time may very well solve the problem and then you see the page you are supposed to see...
To avoid all of this...
One solution to this is to always start people logging in to an ".asp" page that has no querystring info. That way this won't happen. Once they are logged in you can then offer them links to the pages they need to go to. (you of course still want to password protect those pages)
Another solution is to log them into a page with no querystring info and then do a response.redirect to the page with quersytring info.. thus accomplishing the same thing but without the possibility of the issue because of a failed login.
Another solutions is to do checks in your asp page for missing querstring info.. and if it isn't there do something about it like send them somewhere else.. or display a message about there being an error... etc etc
So,basically you don't want to tell people to login into such and such page with querstring info... and providing a username and password..... You can do it but like you found out it can cause an error if they mess up logging in the 1st time. The system just was not designed to handle that. There are complex reasons for that involving security that would just take me too long to explain.
I hope this makes some sense to you.. it is very hard to try and explain
, I have multiple zone banners displayed on a single page using the AspHTTP Component Method.
However, in IE 6.x and NS 7.x each banner has some text displayed before it similar to:
HTTP/1.1 200 OK Server: Microsoft-IIS/5.0 Date: Fri, 17 Sep 2004 07:15:12 GMT MicrosoftOfficeWebServer: 5.0_Pub Connection: Keep-Alive Content-Length: 229 Content-Type: text/html Set-Cookie: ASPSESSIONIDAASSDQBA=HAICCGCANEBEPANCDHLHJJGC; path=/ Cache-control: private
This text does not appear when using Netscape 4.x cwilliams38325.741099537, ok, well as far as what else to try I already told you..
you need to manually compare all those field settings with the sql script and make sure they all got set correctly...
you also need to tell me what email/name you ordered the application under... before I will continue this support with you.. at this point I don't know if you purchased the application or if you are using the unsupported lite version
, question 2 is answered best here
http://support.cjwsoft.com/code/code_info.asp?TID=319&KW =paypal
I should also mention that the paypal scenarios used in ASPProtect can not be tested using PayPal's sandbox. Also test using two real PayPal accounts and on a live setup. (You'll allowed two paypal accounts)
then you can log into the other and refund the transctions and of course it makes sense to use low amount like 1 cent and what not.
Also, I'd love to see what you came up with with the integration. I have been working on it here as well and took it in a different direction as I plan to sell directions for it as an add-on for aspprotect. I have it all working here but so far I dont see an easy way to let other people do it as I had to change things in both systems in a lot of places. Utimately if done under a SQL environment triggers should be used at the database level and that is another consideration.
, nice idea. id be interested to see your modifications for ideas, Just copy the files over. have permissions set on any folders that need it, and edit the data connection so it's valid for the new server. Once you get logged to the admin area go update all the settings so any urls are valid.
really its no different than a new installation so just follow those directions but use your existing files.
There is no domain pointing involved...
As logn as the old stuff is not accesible on the live internet you don't need another license.
As for my installation fee of 25. That is only for new installations. I charge more for something like that as there may be compications such as custom changes to the code that I would have to deal with. Customers often custimize the login and users area.. etc etc .. and there may be hardcoded urls and what not to worry about changing.
LASTLY, I noticed all your other posts are in the ASPProtect 7 area so the installaton process for that is a bit different than for Version 6 so what I said above is not quite the same process. Please make sure you post in the correct area when asking questions. , I am having trouble getting any information to show up in the log files
directory or anything showing up on the log files tab in the
administrator. I have set the following variables under the
settings tab:
UseLogFiles checked and
value of LogFileDirectory is "c:\inetpub\wwwroot\wf\data\logfiles"
I checked the permissions on that folder and they are set so that the Internet Guest account has full control on that directory.
I also checked RecentActiveUsers and RecentPageRequrests.
I am sure I am missing something simple but no files are ever showing
up in the logfiles directory...anyone have similar problems or at least
successes?
Thanks!!
, If you PM your site info and I can go in and troubleshoot. I have no more ideas. Usually people have zero issues installating this application as I got it pretty tweaked so I need to see what is going on in order to help., Can ASPClassifieds display the ads by city?
I have a web directory that lists websites and companies by city. Is it possible to have specific ads shown to the user depending on what city they click on? For example, only ads in New York would be shown to users that have already clicked on that city in my directory.
thanks,
, it makes zero sense really... in the 4 years we have sold this application this is really the weirdest thing anyone has had happen.., This is amazing. You replied to question within minutes. Thanks for showing such a professionalism.
, ok, 1st we need to rule out the #1 reason people sometimes think that is not working.
Is is set up never to allow the same IP to increment the count more than once in a row so when testing it is real easy to think the count isn't working because unless you can change your ip you can not increment the count more than once per album
It's a poor mans spam abuse type of deal..
For the most part it will keep some Joker from hitting refresh 100 times and inflating the count of an album.
Do you think that is possible what is happening ?
Also, here is an older thread about the same issue?
http://support.cjwsoft.com/code/moreinfo54-2.htm
, This isn't going to help you much but here is the deal.
The 2checkout support in ASPProtect actually is not supposed to work with 2checkout subscriptions and therefore does not need to use an item number.
It is intended to be used for single payments only with 2checkout as explained in this thread.
http://support.cjwsoft.com/code/moreinfo212-1.htm
Single payments with 2checkout use their shopping cart which allows for dynamic payments without needing an item number.
I agree with you that 2checkout's interface is confusing. It's actually about the worst system I have ever seen. I could not make a 2Checkout subscription system because their system is just too limited and I couldn't make it work the way it really needed to.
, I have never heard of such a thing...
If the settings are enabled for the web it should work.
That is, as long as your include file syntax is valid.
I run my own windows 2003 server (you are on it now) so I should know
for troubleshooting
try a very very simple example... like a file in a folder.. with a server side include to a file under it
and see if that works
use real simple asp files with nothing crazy in them... and an include like this
<!--#include file = "../myfile.asp"-->
cwilliams38434.5388773148, one thing to note... the time period we are talking about is going to to be whatever you have the session timeout set at in the settings.
perhaps making that value lower like 10 minutes is an option for you.. and might help to deal with situation
, Sorry you feel that way, not my intention. I'm not threatening anything. I was very happy you responded when did so there no reason for any bad feelings. I like your product as I said before and have no problems with it. Sorry again, that was not my intention. Merry Christmas…
, That carrot doesn't really exist in the file, so I'm not sure.
I did download and place the ASPTEST file in www.drsweisberg.com/asptest and when I try to load the 2 pages it fails to load. I have another site on the same server and I uploaded the same exact set of files and the asp pages load. www.klarman.com/asptest
http://www.drsweisberg.com/asptest/server_info.asp
http://www.klarman.com/asptest/server_info.asp
This is how I set the connection:
ConnectionString = "DBQ=D:\clients\rklarman\klarman\asptest\_database\asptest.m db;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"
ConnectionString = "DBQ=D:\clients\rklarman\drsweisberg\asptest\_database\aspte st.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"
, Oh, it does seem to put the photo in the correct directory., lets get back to using the forum and not the pm's please only use the PM's for sensative information. its too hard for me to keep track of all of this as well as help everything else when I got an inbox full of pm's
Ok, so you say no paypal subscription info is being put in the database at all.
I know we have a bunch of people using the paypal subscription code with no issues so I know it works but obviously you got something wrong.
It could be a few things.
Did you enable IPN in the paypal system and put in a postback url like my directions say ?
Are you sure you are not getting paypal single payments and paypal subscriptions mixed up ?
Are the paypal links you made for paypal subscriptions in the correct format like are directions state ? That is critical and another example of something important that you have not shown me.
Did you populate all settings correctly for our paypal subscription code ?
This includes a correct and valid postback url because if that is not right paypal cant communicate with the aspprotect system and no info will get posted back from them at all.
You say your upgrade went well but if you did all all field names perfectly there could be issues with that.
There is just way too much for me to figure out under free support with the info you keep providing me.
I dont think we are going to get anywhere unless I go into your system and spend a considerable amount of time checking everything out. That is not something I do under normal support so if you are interested it is going to involve a fee paid via paypal. It's probably going to take me a while to check everything out and I need you to be 100% sure IPM is enabled in your PayPal account. If you are not sure how to turn it on search their help system as they have plenty of documentation on the process.
, I had some issues with passwords not working. I cleared them up by
going to the affected user and typing in the desired password manually
on the edit screen. Worked like a champ every time, and I haven't had
to do that for some time now.
, you dont want to use the virtual smtp virtual server method... you want to use a real remote email server with valid MX records..
ultimately though after all that is going is it is out of the hands of the asp code and it becomes issues other then the code sending the email... regarding to whether or not emails get blocked by certain organizations
For example:
I have many aol users sign up for various systems I have running without issue. I use CDOSYS with my own server mail.cjwsoft.com which has proper MX records set up.
I would also try to determine the difference between blocking and spam/junk email filtering. It is impoirtant to truly know what is going on.
Sometimes adding more information to the body of the emails going out will eliminate the junk mail filters from gettings the emails.
Then you have the various open relay lists that places like AOL use. If your email server or IP sending the email is on those lists for spamming you do not stand a chance. That is all out of the hands of the ASP code.
, I would like to create a login form on the home page which will not be password protected to the site for members so that they can login right from the home page and not a password protected page like many sites have. And every portal I have seen.
Plus the login form looks really pretty and proffesional on the home page 
...
I can't find anything in the documentation that says how to do this or if it's even possible. Everything I have found says to password protect a page and then direct them there which isn't what I would like to do.
Here is the code of the login page which is an asp include file on the main page:
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
</head>
<body>
<td><img src="images/a026.jpg" alt="" width="187" height="21"></td>
</tr>
<tr>
<td bgcolor="#EBEBEB"><table width="100%" border="0" cellspacing="0" cellpadding="3">
<tr>
<td><table width="180" border="0" cellpadding="0" cellspacing="0" bgcolor="#AAAAAA">
<tr>
<td><img src="images/spacer.gif" alt="" width="1" height="1"></td>
<td><img src="images/spacer.gif" alt="" width="178" height="1"></td>
<td><img src="images/spacer.gif" alt="" width="1" height="1"></td>
</tr>
<tr>
<td><img src="images/spacer.gif" alt="" width="1" height="1"></td>
<td bgcolor="#FFFFFF"><form name="form_login" method="post" action="">
<table width="100%" border="0" cellspacing="5" cellpadding="0">
<tr>
<td width="53%"><input name="textfield" type="text" class="style-01" value="username"></td>
<td width="47%"><a href="#" class="link-02">Forgot pass?</a> </td>
</tr>
<tr>
<td><input name="textfield2" type="text" class="style-01" value="password"></td>
<td><a href="#" class="link-02">Not registered?</a> </td>
</tr>
</table>
</form></td>
<td><img src="images/spacer.gif" alt="" width="1" height="1"></td>
</tr>
<tr>
<td colspan="3"><a href="#"><img src="images/a027.jpg" alt="" width="180" height="15" border="0"></a></td>
</tr>
</table></td>
</tr>
</table></td>
</body>
</html>
Does anybody know what values I would put in the form to send the correct login to AspProtect. And, if I would have to add any extra includes or code to it.
TIA 
, Running in parallel for testing is actually a smart way to do it, but the truth is you don't use anything from version 6 except the upgraded database (we have a tutorial on how to upgrade the database)
Version 7 was a drastic change /rewrite to all of the asp files that come with the application. So you will be starting out with fresh version 7 ".asp" files and folders... You will also find that once you get version 7 running that editing certain things like the look of the users area and the login screens is much easier to do.
That being said any of your own ".asp" pages that you protect use the same protection code they always did, so there will be no drastic changes needed there when you do finalize the upgrade.
If using MSACCESS as the database I suggest installing the application somewhere in your web and using a fresh ASPProtect 7 database. Once you are familiar with the setup and everything is working fine. Attempt the database conversion and when your done stick your converted database in there and see if everything is ok.
Also, if you already purchased the application download the latest version before doing the install. It's the same download URL. If you don't have it email me and I can hook you up. I have added some new features and fixed a couple minor things since it's release.
So far the feedback on version 7 has been awesome..
cwilliams38414.0133680556, I used Dreamweaver4 to make my site is there anything I can do to make it work?
, I have no idea.. perhaps PM me info on how to log into your site and reproduce the issue., Hi, I am glad you like the system.
Thx for the comments..
The banner logic in aspbanner it tweaked for speed and performance.. that sort of thing really wouldn't fit into the current code structure very well. It would slow things down and be a nightmare to code because of the way aspbanner uses ultra fast application variables for the banner rotation. Basically its a feature I didnt incorporate for performance and pricing reasons.
I would suggest making different zones for different conditions.. then surrounding the banner calling code with if else logic so a different baner zone was called under certain conditions.
That way performance would not be effected and you could actually show a different group of banners based on certain conditions.
Sorry, but that is the best advice I can offer at this time.
I built ASPBanner for performance and at this time I refuse to sacrifice that for any feature that will slow it down and consume more resources.
cwilliams38383.5395601852, When did you download the ASPProtect Version 7 zip file ?
what did you enter as a wrong password to make that happen ?
does it it do it when other wrong passwords are entered ?
cwilliams38452.722037037, As an update to this thread I fixed the "upload_post.asp" page quite some time ago but forgot to post the updated file here.
So here it is.
2005-09-16_165913_upload_post.zip
, Thanks for the information. We added the name manually instead of using the App_Name variable.,
Timecard Entry: 3/25/2006 4:56:07 PM
lunch, bUSINESS fAIR, Talked to Mary Wood about supplies. Sent a note to Sales and Mkting about what we need. Talked to Andrea about work order system., checked modems, learned about general Windows 2000 information and as well touched on some office 2000 components, VT journal - showing Andrea, very busy, came into work because i did not see the updated schedule stating that my monday shift had been switched to sunday to help out nate.....doh...., working on getting us info for phone co and calling ppl with darrell, ti.com admin...., Invitations for GiSCO Online, started the weekly cancel refund review, chow, Travelling back to Watertown office, steady, Still light for a Monday, Lunch, A bunch of calls... quieted down around 8:30, got a bite to eat, LEARN GOLIVE (EQUIVALENT TO LEARNING FRONTPAGE FROM THE BEGINNING.. FOR USE ON TOWN OF CLAYTON .. , Pulled invoices to go with yesterdays deposit-forgot, Took tech calls, not very busy, checked DUI, AUQ, RAD, and voice mail. , return to clayton, Steady phones, Found the Annex 2000 and a Shelf system for it. Ordered it and checked on credit w/ vendor., Reset modems, showed Gary how to setup SQL on the tech machine, sat in NOC again, and also set up my certificate on my computer., ASP & Interdev Training, Conference Calls, Telergy, David B (PCS)
Investers, and Nortel, correction to invoices, jeffy paid for food , REED_BENOIT___2000-26 ADDED PHOTOS AND MADE AJUSTMENTS AND ADDED MORE CONTENT AND LAYOUT CHANGES,
