Humm.. that should have worked fine

why are you getting a "OLE DB" error I wonder ?

I need more information. 

Database being used and version ?
Server OS Version?
Connection String being used ?

etc etc

did you fix it because I see all the pictures just fine ?

http://mcintoshcounty.org/real_estate/view_item.asp?Ad_ID=1

Chris -

Long time no talk, which is a good thing.  I have purchased another product from you, ASPVendor.  I am running into an issues.

When I try and remove the image through the image manager, it does not remove it.  Screen shot attached.

2005-10-19_194248_image_upload.zip

Thanks

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

... doesn't seem to be working on my site. I expect I did something wrong.

I've created some groups, "week", "month", and "year". Their IDS are 6, 5, and 4, respectivelty. When someone goes through the PayPal signup, he's assigned to one of those groups based on his subscription.

When I see a new subscriber and check the relevant group the person's supposed to be in, that person's not in that group. I'm adding them manually for now, but I'd sure like a solution for when I go to sleep...

My subscription code looks like this:

input type="hidden" name="custom" value="5,*4*,<% =User_ID %>

One-off code looks like this:

option selected value="7,4.95,1,*6*"

I've created the groups in my management console. Is there anywhere or anything else I'm missing?

Adding Support For ServerObjects ASPMail

ASPProtect as you know does not support ServerObjects ASPMail component by default.

Here are directions to make it work.

In the ASPProtect admin settings area simply pretend as if you are using the softartisans sasmtp mailer component. ASPMail and that sasmtp component share the same properties… and the code used for them is nearly identical.

So search through the code for any place where email is sent and simply change

Set Mailer = Server.CreateObject("SoftArtisans.SMTPMail")

To

Set Mailer = Server.CreateObject("SMTPsvg.Mailer")

It is about 4 places. They are not too hard to find.

That’s the easy way to get all the emailing functions working with ASPMail

Please Note : ASPProtect v7.x has a new feature called groups that is much more powerful than access levels. Access Levels were left in the product primarily for existing customers that upgrade to the new version so they do not need to make a lot of changes to their site if they were using Access Levels.


More On Access Levels

Again, Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System. Look at the source code of the ASP pages in that folder with a text editor to see the working code.

Access Levels and how they work can be re-coded to work in many different ways. However, you have to be a good ASP developer to make changes to it. Here is some information on how they work by default.

In the "check_user_inc.asp" that comes in the root of this system Access Levels work as follows.

Level 1 has Access to - Level 1
Level 2 has Access to - Level 1,2
Level 3 has Access to - Level 1,2,3
Level 4 has Access to - Level 1,2,3,4
Level 5 has Access to - Level 1,2,3,4,5
Level 6 has Access to - Level 1,2,3,4,5,6
Level 7 has Access to - Level 1,2,3,4,5,6,7
Level 8 has Access to - Level 1,2,3,4,5,6,7,8
ADMIN has Access to - Level 1,2,3,4,5,6,7,8,ADMIN

Here is some additional info..

If the access levels are too restrictive you can ignore them all together and create your own totally custom solutions.
Here is a quick rundown of some of the things you can do.

Ok... so if you want to be really specific about what each user can see and
can't .. here's an example of what you can do

Don't use the access levels before the include file..
Don't worry about what you set a user to in the admin area since the access levels won't be used.

Do something like this..

Every time a user logs in session variables are set that you can access at
any time.. thus allowing you to know who they are.

So you could do something like this...


<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

<%
If Session("USERNAME") = "bob1267" or Session("USERNAME") = "carl45" or Session("ADMIN") = "True" Then
Session("PASSWORDACCESS") = "Yes"
Else
Session("PASSWORDACCESS") = "No"
Response.Redirect(Request.ServerVariables("script_name"))
End If
%>

The following URL explains what Redirects are.
http://www.powerasp.com/content/code-snippets/redirects.asp

That would in effect create totally custom access levels.. but you would
have to do it manually for each user.

You can also do things like this after a person logs in

Show custom html to any specific user based on either their username or
access level ... like so

say there was a menu and a certain link should only show up to username
"paully67"

you could do something like this


<HTML>
<HEAD>
<TITLE></TITLE>
</HEAD>
<BODY>


<br>
<a href="main.asp">Home Page</a>
<%
If Session("USERNAME") = "paully67" Then
%>
<br>
<a href="paullys_page.asp">Pauls Stats Page</a>
<%
End If
%>
<br>
<a href="links.asp">Links Page</a>

</BODY>
</HTML>

Or you can show custom HTML or links based on Access Levels or any other info.

You can do just about anything with if-then statements and
using the built in vbscript functions..

Hopefully this info will help to give you some ideas...

Bottom line is you have to do some work within your site to make the Access Level system really come alive.

I dont understand why I would get an error? -- I'm not sending the email from internal - so why would it try to validate?

I'm trying to send an email to an independent place - just like I would send an email to you

Am I using the wrong email setting - should I be doing something other than using "remote server"

More Upgrade Info

To upgrade an existing ASPBanner system please follow these steps.

Back up your old system completely before starting.

Install the new system per the installation instructions that came with it.

Once it is running simply use your old ASPBanner database with the new system.

You may also want to keep your banner images folder from before in the same location so your existing banners still link to valid image urls because the new system stores banner images in a new location.

Since the config table in the database is no longer used you will need to go to the settings screen of aspbanner again and configure things. The config table in your old database can be deleted or left alone. It won't be used anymore so it does not matter either way.

That is all there is to it. If you have any issues please ask in the forums and we will help you out.

Thought this would be easy.  A few more pointers should get the database connection to work:

1) How do you decide whether it is a DSN (system datasource) or not? Does just putting the file in the ODBC make it so? 

2)We have other files in there for other server applications, does that mean we’re stuck using DSN’s or is the file independent of that control dialog?

3) Assuming we get rid of using DSN for this database (or not), does the code go referenced in your article http://www.powerasp.com/content/hintstips/permissions.asp apply here or should it just work?

What else are we missing?

I am also getting the "Unspecified Error" message.  I just transferred my site to IIS 5.0 and I get that error now.  However it does not happen everytime.  I can click on a page and it opens fine and then I hit refresh in the browser and I get the "Unspecified Error" message.  What could be causing this?

you basically have to edit the html in the links in the various pages and remove them... some are in includes files

use a text editor and be causious / back things up before you remove links so you can revert back

Hello,

VBScript is the most popular ASP scripting language, and has the most support available. I estimate that less than 5% of the ASP coders out there use anything other than vbscript

That being said it specifically says on the aspprotect site ASPProtect is only for use in protecting asp using "vbscript" as the language.

http://www.aspprotect.com/more_info_full_v7.asp

http://www.aspprotect.com/comparison.asp

it is something I specified very clearly for this very reason.

Sorry, but you can not use ASPProtect to protect pages using Language="Javascript". The code is too complex to be mixed with server side Javascript.

To password protect asp pages written using "Javascript" you really need a an application specifically written in and designed to work with ASP pages written using "Javascript". And then of course that application would not be able to protect ".asp" pages written using "vbscript." (I mean never say never, but it would be a ton of work to get both working and I doubt you will ever see a commercial application that does both)

as for switching back and forth between vbscript and javascript you really can't except with very simple code. Doing so with anything complex can be extremely problematic because the order of execution sometimes gets all mixed up because of the complexity of the code being used.

That doesn't mean it can not work....

You would really want to do something like this.


do not specify a default language at the top

surround the aspprotect include file with this

<SCRIPT Language="vbscript">

</script>

surround your javascript code with this

<SCRIPT Language="JavaScript">

</script>

then make sure none the code including the aspprotect include file has any <% or %> tags in it

that means you have to remove that sort of thing everywhere... that means a lot of work if you used a lot of that sort of thing instead of response.writes to write out html type stuff

and again... I don't know if you would ever get it all working

Is there a way to protect other virtual sites on the server that are not under the default web site considering people may have different websites running off one server?  I get the following error:

Parser Error Message: Cannot use a leading .. to exit above the top directory.

Source Error:

Line 1: <%@ Register TagPrefix="aspprotect" TagName="checkaccess" Src="../../protectpage.ascx" %> Line 2: <aspprotect:checkaccess level="4" groups="null" runat="server"></aspprotect:checkaccess> Line 3:

Thanks!

upgrade pricing is here
http://www.aspbanner.com/purchase_unlimited_v8.1_classic_upg rade.asp

what is different
http://www.aspbanner.com/v8_notes.asp

the changes to make it work with MySQL were vast to say the least
more on that from an old thread
http://support.cjwsoft.com/code/code_info.asp?TID=37&PN= 1&TPN=1

just please remember use of MySQL is just not supported
http://www.aspbanner.com/mysql.htm

I can assure you it works well as I have people using it

I am converting the email over from CDONTS to CDO so it will run on my host 2003 server.

What files should I be concerned with?  Under gallery_admin there is an email_user.asp and  under the main gallery folder thier is an email friend. Is there an other email routines I should be concerned with?

Thank You for your Assistance.

Jeromy

This first one may be an obvious one, but is it only .asp files that I can protect as in no HTML files.

Can the program be set to protect my whole https directory contents (though the answer to the last question may have bearing here - there are html files as well as .asp in there) as in http://secure.mydomain.com

Thanks in advance

I am trying to find out where I can enter the ttle for the application.

There is a variableor field called App_Name into which it would be good to insert a generic name. Can this be edited?

I have searched high and low but cannot find anything to do with it.

Hello- I am trying to install the ASPPROTECT product and tried to read all the docs but still am getting the following error:

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1980 Thread 0x1458 DBC 0x223c374 Jet'.

I understand about the physical path for the DSN-less connection and followed the example given. I got in touch with tech support for the host of my site and the give me the following as a physical path:

c:\sites\Single20\laptv1\database

Some observations:

1.- The database directory is outside the root dir but I think I am accounting for it with the path

2.- The permissions are ok

Any ideas?

Thanks

FP

If you run asplistings auto in its own folder with its own application in IIS. Connected to its own database.

And you run your other version of ASPListiings in its own folder with its own application in IIS. Connected to its own database.

You will have zero major changes to make to anything... other than what you did above..

But remember theyare the same app and share a lot of thing including sessions and application variables.. that is why if they are installed in the same domain each one needs its own application set in the IIS console so they run seperately of one another.

Hello -

Believe it or not I finally can access the photogallery. You were right Chris regarding the unzipping of the files.

Now onto the next challenge! I have set up three categories and proceeded to create a test album. I uploaded a couple of pictures (yeah that worked!!!) but the album does not show up on the default.asp page under the category.

Please advise -
Rhona (rookie)

I got ya. Well hey, that's what's great about the iframe right?

ASPProtect v7.x runs on Microsoft IIS servers only.
That means Windows XP Pro, Windows 2000 server and Windows 2003 server. The web server must have ASP support enabled and support Data Connections. 99% of them do as it's a pretty normal thing, but you should ask and make sure your hosting plan supports it.


Before you even start please read this thread and do what it says.
If any errors show up it is important you see the real error instead of a useless HTTP 500 internal server error.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=11& PN=1

Once doing that make sure to use Internet Explorer as you follow along with these directions.

Now, unzip your installation zip file that you downloaded from CJWSoft.
Use a program like winzip and be sure you have it set up to unzip the directories as well. You can also use windows xp's built in folder compression tools to unzip the archive.

When you unzip the application you should have all of the following folders and files. (more or less, it depends on the version)

Now, you can copy all of these files into the root of your website or if you like you can make a folder called "aspprotect" and put all of these folders and files in that folder. Either way it really does not matter.

Now, contact your web hosting company and instruct them that you need permissions set on the data folder that you copied into your website. This folder and all of its child folders need modify permissions set on it for the anonymous webserver account. It is very important that they set the permissions correctly and on all the child folders as well.

Here are some threads on exactly how these permissions are set.
If you run your own server or are developing locally you can do this yourself. If not most likely you need to put in a request to your hosting company as you CAN NOT set these permissions via Frontpage or FTP.

Windows 2003 Server and permissions
http://support.cjwsoft.com/forum/forum_posts.asp?TID=136& ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;PN=1

Windows XP Pro and permissions
http://support.cjwsoft.com/forum/forum_posts.asp?TID=56& PN=1

Once permissions are set.. run this page via your web browser

http://www.mysite.com/data/setup_info.asp

Replacing the part in blue with your website info.

When this page is run it will report back a screen like so:



Now, take the connection string info it shows you.
Edit the "dataconn_inc.asp" file in the root of the ASPProtect system and use that data connection information. It should be valid for the server.

If you are using MSSQL server instead of Access please see the SQL database creation directions as you will need to create the MSSQL database and use a special connection string for that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=160& ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;PN=1

Now, take the CookieEncryptionKey and PasswordEncryptionKey info that it gives you and enter it into the "config_inc.asp" file in the root of the ASPProtect system. These will be the unique keys that your encryption will be based off of.

Ok...

The files have been copied to your website, the permissions are set on the data folder, and the database connection is ready.

Now.. run this page

http://www.mysite.com/password_admin/get_me_in.asp

Replacing the part in blue with your website info.

This is a special page we use to get into the system for the 1st time.

If you get a nasty error when you run that page similar to this.

Error Type:
Active Server Pages, ASP 0131 (0x80004005)
The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory.

Then parent paths are disabled on the webserver and you need to do an extra step to deal with that. Follow this link.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=162& ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;PN=1&TPN=1

If you get any other variery of "80004005" error then there is a problem with your data connection.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=27& PN=1

Those errors are usualy related to database folder permissions or an imcorrect physical path to the database file specified though they can mean a lot of things.


Once you get the page running you will see a login prompt and one form field

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see the admin area of ASPProtect.

Now that you are in the system you need to create an admin account.

Click on "ADD NEW USER".. fill out the info and add a user.
You really only need to fill out (first name,last name,email,username,and password)

Now save that user.

You should see a new user listed in the admin area. Click on Edit user to the left of the new account. On the edit screen check the "admin" checkbox and save the user.

You just created an Admin account.

Now click on the "log off" button on the top menu and click yes to log off.

Now close the browser. Then run this URL

http://www.mysite.com/password_admin/default.asp

Replacing the part in blue with your website info.

You should now be able to in to the admin area of the system using the new admin account you created.

You are now ready to go to the settings page so click on the settings tab in the menu. There are a lot of options and paths that need to be set on this page. Every setting is described in detail on this page. You need to go through the page and set things up properly. Anytime the page asks for a path to a url or file the page will auto generate what should be the path to use. (expected path) If your server has parent paths disabled a few of those auto generated paths will not show up. If that is the case run this url from your server and it should tell you the paths to use for those settings.

http://www.mysite.com/data/expected_paths.asp

Replacing the part in blue with your website info.

Once your all done and the system seems to be running fine you should go back and delete the following pages as they are no longer needed and pose a potential security risk.

http://www.mysite.com/data/setup_info.asp
http://www.mysite.com/data/expected_paths.asp
http://www.mysite.com/password_admin/get_me_in.asp

You should back up the original zip archive you got from CJWSoft in case you ever need those files again.

VERY IMPORTANT: The user passwords from now on will be encrypted using the "PasswordEncryptionKey" you specified in the "config_inc.asp" file.

If you ever change that key all of your passwords will be invalid and you can not get them back unless you know the key and put it back, so plan on never changing that key unless you really know what your doing and know how to decrypt/re-encrypt the passwords using a new key. (something we do not cover at the moment but probably will when we have time to make a tutorial) 

Hi,

Its just not enough information to go on. I need more details on what is going on. There are a lot of configuration settings in these applications. I really do not know what to make of that screen shot.

My 1st guess is that if you cannot delete a picture that the picture folder does not have delete permissions ??

I also need to mention that I am not sure what this has to do with ASPImage ?

Access Database Password

By default all of the Access Databases we give out have a default password of "temp"

The Default username that and Access database uses is "Admin" but you should not be concerned with that except in your connection strings.

The default password for the Access Database can only be changed using Microsoft Access to do so. If you have security concerns it would make sense to change the password. The help system built into Microsoft Access best explains how to do that.

Terribly sorry, but we are not software-technical.  So can you please tell us exactly which folder the database would be in.

Thanks in advance.

DONE IT

DON'T WORRY!

DON'T ASK HOW, BUT NOW IT WORKS!!

THANK YOU IF IT WAS YOU, OR THANK YOU GOD IF IT WAS ME!!!

One is for paypal subscriptions (recurring billing) and the other is for single payments

http://support.cjwsoft.com/forum/forum_posts.asp?TID=185& ; ; ;PN=1

http://support.cjwsoft.com/forum/forum_posts.asp?TID=186& ; ; ;PN=1

You can delete any of the 3rd party payment directories you are not using including the the 2checkout one... (all those folders really are is a copy of the users folder specially modified to handle a certain payment processor)

Just Don't delete the "users" folder though as there are things you do there that you can not do anywhere else..  quite a few things..  editing existing account info, looking up passwords... etc etc

I don't believe that the iframe method is supported in a .NET (aspx) implementation, is it?

JDooley

It appears there was a flag problem. When reading it into SQL Server, it converted the True/False in Access to 1/0 in SQL Server.

I installed the ASPProtect.NET project no problem.  I am using VS.NET 2003 on Windows XP SP2 (and fully patched).  I am able to build the project successfully, however I cannot debug the project.  I get an error "Unable to start debugging on the web server. The project is not configured to be debugged."  The web app runs fine just browsing to it.

I know this is an isolated problem particular to this project.  I have MANY other .NET projects that I can debug without any problems.  I have tried going into IIS and turn on the debugging for server-side script debugging and making sure my IIS application setting were configured correctly.

Can anyone shed any light on this at all?  Christopher, is there any reason I should not be able to debug this?  (i.e. the aspprotectlicense.dll)

Thanks,

K