ok, well if you want to test on your own....  in the ipn.asp file for the subscription folder you will see this area of code used for testing

' Un-comment this section and give this directory proper permissions to enable logging to a text file
' Very helpful for troubleshooting
'   Set ObjMyFile = CreateObject("Scripting.FileSystemObject")
'   LogFileName = ("paypal.txt")
'   'Open Text File.. If doesn't exist create it and append to it .. If exists just append to it
'   Set WriteMyData = ObjMyFile.OpenTextFile(Server.MapPath("paypal.txt"),8,True)
'   RowHeaderString =  ""
'   RowHeaderString =  RowHeaderString & OrderID & vbTab
'   RowHeaderString =  RowHeaderString & Custom & vbTab
'   RowHeaderString =  RowHeaderString & User_ID & vbTab
'   RowHeaderString =  RowHeaderString & subscr_id & vbTab
'   RowHeaderString =  RowHeaderString & txn_type & vbTab
'   RowHeaderString =  RowHeaderString & subscr_date & vbTab
'   RowHeaderString =  RowHeaderString & Access_level & vbTab
'   RowHeaderString =  RowHeaderString & Groups
'   WriteMyData.WriteLine(RowHeaderString)
'   WriteMyData.Close

now that folder will need modify permissions for the text file to be written to but this is a good way to test if the ipn.asp page ever gets hit by paypal.

ITS REAL IMPORTANT THAT THE TEST FILE CAN BE WRITTEN TO OR DOING THIS WILL JUST CAUSE MORE ISSUES

To ensure the text file can be written to and permissions are correct for that folder you can make a new .asp in there and run this to see if the text file writing works

   Set ObjMyFile = CreateObject("Scripting.FileSystemObject")
   LogFileName = ("paypal.txt")
   'Open Text File.. If doesn't exist create it and append to it .. If exists just append to it
   Set WriteMyData = ObjMyFile.OpenTextFile(Server.MapPath("paypal.txt"),8,True)
   WriteMyData.WriteLine("the file was written to")
   WriteMyData.Close

Now, you can even change the location of the text file to place that does have permissions if you like.

This is what I would do if I was in there... then I would make some test payments using 1 cent and another paypal account (your allowed 2)

and see what happens

it is always possible the subscription code may have a bug in it. The last time I tested I only tested the single payment folder which worked perfectly. If I have time in the next couple days I am going to test the subscription stuff again. If there is something wrong I can cure it quickly.

The two routines share a lot of code in common.

You can also try setting asphttp's user agent property to some browser version like in this example. It might stop that info from showing up when it fetches a page from the server.

<%
Dim BanObj1Http
Set BanObj1Http = Server.CreateObject("AspHTTP.Conn")
BanObj1Http.UserAgent = "Mozilla Compatible (MS IE 3.01 WinNT)"
BanObj1Http.Url = " http://banserver.powerasp.com/aspbanner/aspbanner_inc.asp?Ba nnerZone=1"
Response.Write BanObj1Http.GetURL
set BanObj1Http = nothing
%>

Also... I dont know if these values below will work but I got them from looking at my nt logs.

Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)

Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0)

And here is more info on the asphttp component and it's settings.
http://www.serverobjects.com/comp/asphttp3.htm

UPDATE:  read whole thread..
Version has been delayed




These are my personal notes on the new version of ASP Photo Gallery that should be out sometime in May/June 2004. Please ingore any typos.

This version may be more expensive than the current pro version as this is a major re-write and there will be a ton of new features.

Regardless, special pricing will be offerered to existing users.

If you see any features not listed that you think would be nice please post them here. We will of course consider them.

ASP Photo Gallery Version 4

------------------------------------------------------------ --------------------------------------------

Finished Improvements:

new setup page makes setting up the data connection easier than ever
it attempts to determine the possible data paths and makes suggestions for what to try
when you finally get the data connection working it gives you a link to the admin area of the application
so you can get started using the application

all database table names can be specified in the config_inc.asp file for advanced users that they may need
to change the table names in the database.. helpful for sql installation where one sql database must be
shared by many applications

new data folder is the only folder that needs permissions set
before multiple folders needed permissions
now everything can be put in this folder... database,logfiles,configuration files,picture upload folders...
eventually all cjwsoft applications will do this allowing multiple cjwsoft applications to use that same folder
therefore making it easier than ever to setup more applications without asking your host to set more permissions

new text based config file makes it easier to add new options to the program without making changes to
the database structure... therefore the need for the configuration table in the database has been eliminated
this also reduces system resources needed to load the config data for each page because it eliminates calls to the
database for config data

added voice effects for data connection page, intro users page, and settings page

made it so ratings color was an option (red or blue)

fixed minor bug that wasn't showing fixed category heights when that was selected and am image wasn't originally sized that way during initial upload

changed logfiles dates so they always show up in the proper order 09 vs 9

added config option to change bit query value to 1 or -1
default it to 1.... this is a technical thing

added the extra options currently in the config file to the settings page so people do not have to manually edit that
file any longer...

added new persits email option and authentication options to the settings page

added new CDOSYS emailing option

added support for dundas emailer

added support for ASPSMARTMAIL

fixed word filter so if it is empty it doesn't mess up
also make editing it part of the main settings

made email functions include file and edited all page that email to use it

added css/style sheet support and removed a lot of the old font tags

seperated the settings page into sections because it was too big and confusing

added ability for text watermarking when using the ASPImage component

made the picture upload error message no longer mention browsers that do not support picture uploading
as that is confusing people... and the problem is never that anymore

Made the ASPImage test page delete the bar graph before creating it so if it is already there they will
not think it is working

added crystal ball feature to admin users screen... shows additional user info when you hold the mouse over it

Made search function highlight search word in results.
Made the search function search the image description text files as well

Eliminated the guestbook directory as there was no need for the guestbook to be in it's own directory. This also simplified the menu.asp file as the guestbook section could be removed.

------------------------------------------------------------ --------------------------------------------

Possible Improvements:

eventually make new and much better directions/documentation... html based for multiple reasons

Eliminate the need for parent paths to be enabled on the web server.
(THIS MAY NOT BE POSSIBLE)
Many hosting companies disabled parent paths and will not enable them for their users.
On Windows 2003 Server Parent Paths are disabled by default.

make it so users ability to upload pics can be optionally disabled

possibly make some of the special functions in the extras folder built in to the admin area

Make the category picture uploader smarter because of the jpg gif issue when reuploading cat icons
A jpg loaded over a gif.. doesn't delete the old gif graphic and vice versa

Reduce number of ".asp" pages in general.

Use more functions for redundant tasks.

Optimize all instances of the old filefound function which is using more resources than are necessary

option.explicit the entire application and get all the variables dimmed once and for all

possibly incorporate the new category system I am working on which allows for unlimited categories and levels
also simplifies the heck out of the pages that call the categories

possibly add some cool image manipulation functions such as rotation for the various image components supported

possibly add the ability to move pictures around in an album. and maybe between albums
I must also remember to move the ratings and desc as well for that image.

possibly add the ability to make individual pictures require approval

possibly add the streaming image ability (asp page called from image tag) I came up with as an option for
people that can use it. this will better secure images in password protected albums and also possibly make
it so images can only be viewed from certain urls.. and maybe make an interface for a list of allowed urls

improve the .net support to also resize the larger images.. currently it does not

possibly add a feature to store 3 versions of images uploaded
thumbnail, medium res, and high res/original
this will appeal to professionals or people that may want to sell prints
storing a large version will be optional

possible support for multimedia content other than gif and jpg images

fix... url to link to..   problem on control pics page when both a jpg and a gif are present... which also relates to a another slight
bug that needs to be taken care of

make interface in admin to listen to installed midi files
and also to upload / delete them

possibly make per album guestbook... or call it something else like disussion or comments

add option to store the images orginal name in the images description area during upload
may be helpful to people that name their images in a somewhat descriptive way

change approval settings so they work on a per user basis
eliminate access levels from edit user screen and get rid of the level 4 stuff mentioned
possibly add a per user option for individual pic approval as well if I get that feature implemented

add support for the ibulc bulk upload client that I recently discovered
it is very cool

Hello,

I have ASPprotect 7 installed on my remote server.  I am able to go to the examples/default.asp page and login in without any difficulties.  If I copy the code from that page and paste it in a new page called the same thing but in a different folder, I get this error;  (Keep in mind that this is essentially the same exact page in a different location of the website)

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file '../../check_user_inc.asp' was not found.
/aspprotect/Pages/default.asp, line 3

I get the same error if I paste the "protection code" I have generated into the top of a current (.asp) page in my site.

Basically, the only pages that work are the ones that came with the program as examples.  Thats great, but now I need to make it work for my pages.  Any thoughts?

http://support.cjwsoft.com/code/moreinfo286-2.htm

http://support.cjwsoft.com/code/moreinfo391-1.htm

http://support.cjwsoft.com/code/moreinfo385-1.htm

Hallo,

Can I change the number of the access levels?

I want to have about 20 levels...

One is for paypal subscriptions (recurring billing) and the other is for single payments

http://support.cjwsoft.com/forum/forum_posts.asp?TID=185& ; ; ;PN=1

http://support.cjwsoft.com/forum/forum_posts.asp?TID=186& ; ; ;PN=1

You can delete any of the 3rd party payment directories you are not using including the the 2checkout one... (all those folders really are is a copy of the users folder specially modified to handle a certain payment processor)

Just Don't delete the "users" folder though as there are things you do there that you can not do anywhere else..  quite a few things..  editing existing account info, looking up passwords... etc etc

I really need more information.

Connection strings being used ?
How have permissions for the database folder been set ?

etc etc  the more specific the better

You also may want to download ASPTest from our main site and see if you can get that running.

I would suspect your problem relates to the databases having a password set on them. Probably the ones you connected to didn't. It complicates setting up a connection correctly (especially a dsn) but there is a good reason for it as it adds a little extra security.

And of course my detailed article on the error.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=27& PN=1

question 2 is answered best here

http://support.cjwsoft.com/code/code_info.asp?TID=319&KW =paypal

I should also mention that the paypal scenarios used in ASPProtect can not be tested using PayPal's sandbox. Also test using two real PayPal accounts and on a live setup. (You'll allowed two paypal accounts)

then you can log into the other and refund the transctions and of course it makes sense to use low amount like 1 cent and what not.

Also, I'd love to see what you came up with with the integration. I have been working on it here as well and took it in a different direction as I plan to sell directions for it as an add-on for aspprotect. I have it all working here but so far I dont see an easy way to let other people do it as I had to change things in both systems in a lot of places. Utimately if done under a SQL environment triggers should be used at the database level and that is another consideration.

Hi,

I have just one quick question, I know this works with Paypal but does this work with Merchant Account?

How difficult it is to make it workable with Merchant account? I appreciate your answer.

Thanks.

i've got a client who has handed me a 151 character banner URL, and i see that the database is designed to take 150 characters. i took the obvious step of just increasing the size of that text field in the database, but i still get this error when i try to enter the URL in the proper form field:

Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.

/banners/aspbanner/save_banner.asp, line 200

now, line 200 is just this:

If Banner_Link_URL = "" THEN
 CmdEditBanner.Fields("Banner_Link_URL") = NULL
Else
 CmdEditBanner.Fields("Banner_Link_URL") = Banner_Link_URL
End If

which tells me that something is blocking the assignment of that long value to that field, even though i believed i had extended the length of that field in the source database.

where else might i look?

Thanks, I really appreciate you working on this. The software works GREAT and the support you give can't be beat. I will definately tell other that are looking for software for their sites to check your first.

one more question.

To use the bulk upload feature of aspuload, do I just need to add another upload section to the same upload page, that will allow more than one file to be selected then tell it to put the files in as Photo 1, 2, 3 etc.? I am a rookie at ASP but I think this is possible and with a little research I should be able to get it going.

Just want to make sure I am on the right track.

Thanks

Got it working.    Had purchased a long time ago and forgot about needing to run the userreg.exe.  All is well and thanks for the follow up.

Lance

We have been using ASP Protect for a while now and are big fans of the program.  We received ASP Banner 8.2 with our puchase which we now have a need for.  I went to put the files on our webpage, and doing nothing else other than locating the directory there, I noticed differences with how ASP Protect operates.  We have customized it a bit and want to keep the 2 programs separate.  the login screen for one showed up on the other, and some ASP Protect pages appeared altered so i immediately deleted ASP Banner.  did I do something wrong, and how can i ensure the 2 programs work completely independant of each other?  We can't risk braking what we're now using but would really like to add banner functionality to some of our pages.  maybe an update to the program before we install?  puchase new software?  Thanks for your help-

Your probably talking about "Session.Timeout" which is a feature of the IIS webserver. Please do a google search on it for more information.

In the meatime if you look at the top of the "check_user_inc.asp" file you should see a section like this where you can try to change the value.

' Minutes you want before the session times out.
' This is set on the server to be default to 15 or 20 minutes depending on the server version
' You can change it there or override it here.
Session.Timeout = 30

Specifying it like that is supposed to overwrite the value for your web in the IIS console which is usualy 20 minutes.

Hi Chris

After turing off the delayed stats feature the internal errors have stopped and it still serves banners, although I havent checked the logs yet. I will and post any errors.

I left my test page up last night at say 11pm serving 4 banners of different sizes rotating every 15 seconds, now at 9am the page is just displaying 1. If I refresh the page they all reappear.

Regards
Colin

For pay signups you set the groups during signup it like this thread tells you to

http://support.cjwsoft.com/code/moreinfo186-1.htm

only difference is you need to specify the groups info like so
(basically getting rid of the commas and just leaving behind the group numbers with a * around everything)

Also be sure to have no double asterisks

so, *1*,*2* would just be *1*2*

so, *1*,*2*,*5* would just be *1*2*5*

Chris.

After I had you install ASPProtect I added the ASP protecting code to the top of my home page:

<%@ LANGUAGE="VBSCRIPT" %>

<% CHECKFOR = "1" %>
<!--#INCLUDE FILE="../../check_user_inc.asp"-->

Then I made my index.html page my login page buy using the script "Login form on a non protected page" on that I changed <form method="POST" action="memberarea.asp"> to <form method="POST" action="home.html">. 

When I try to log on to that page I get en error page HTTP Error 405 - The HTTP verb used to access this page is not allowed. Internet Information Services (IIS). I checked with my hosting company GoDaddy.com and they informed me that due to the fact that they do not have ASPProtect instaled on there systems they can not support it.  In recent conversations you told me that you have customers that do use godaddy and you products. 

Can you please tell me what I can do to get this working?

Thank you for your time and help.

Christopher,

I can empathize. It can be a real pain to stablize a server and fend off hack attacks.

As for beta testing, I was referring to once you get to the point where you're ready to release it to the public whether it's this month, next month, etc.

Good Luck!

Al

sometimes those emails take a bit... all depend on wht you are using to send them and whether a pickup directory is involved

as for the other I do not know.. PM me the site details I can look

if it is a 2003 server parent paths must of course be enabled.. its a requirement of aspclassifieds

MySQL Database Setup

Use of MySQL is 100% unsupported as you can see from the site.
http://www.aspbanner.com/mysql.htm

Even still I recently had an encouter with an extremely Jerky person (read the thread above for more on that) and because of him I am adding this tutorial showing one way to set things up on a windows server using the official MySQL tools available.

Let me just say as well that there are 100's of 3rd party tools to work with MySQL databases and many ways to create the database and apply the database creation script. In the past it had to be done via the command line, but now there are a lot of visual tools you can do it with. Furthermore all hosting companies set MySQL up differently and give you access to varius interfaces to manage it which are all different, and that is primarily why I do not support it. How the hell could I support all those different interfaces many of which are totally custom?

The fact is 99% of the people that purchased ASPBanner to use with MySQL have done so without issue and love how it runs. Regardless here is how I set up a working MySQL database on a windows server proving it does indeed run with a MySQL database.

1st of all if you are setting up the server you need to download some things from http://www.mysql.com/ 
(btw: you local developers can install this on XP Pro as well if you like.)

For this article we are going to download the current non beta windows version of MySQL which is 5.0. ALso known as the Windows Essentials (x86) download. It's about 17 meg.

Because ASPBanner uses the MyODBC drivers (now called Connector/ODBC) to connect to the MySQL database you need to download those as well. (Our site flat out says this is required for MySQL use)

So I download those from here. http://dev.mysql.com/downloads/connector/odbc/3.51.html
Version 3.51 has been the current version for a couple years now.
You want the windows driver install which is about 2 meg.

The two downloads should look like this.



Now, on the webserver you run the version 5 setup (mysql-essential-5.0.19-win32.msi) I will guide you through it step by setp.



Hit Next



I am going to choose typical for the sake of this article.

Hit Next



Hit Next



Wait for a bit



I skipped this part.



Choose to configure the MySQL Now

Hit Finish

Hit Next

I am going to choose Detailed Configuration



Since I am on a development machine for this install I am going to choose Developer Machine. For a Real Server choose one of the server options.



For this article I am going to choose Multifunctional Database: You may want to pick one of the other options. That is up to you. ASPBanner will work under any of the scenarios.



I am going to leave the location at its default

Hit Next



Since this is a development machine these options are fine.

Hit Next



These options are fine as well.

Hit Next



Standard is fine for my development machine.

Hit Next



I am going to choose both of these options. The 1st one is Important and should be enabled on a real server so MySQL always runs. The 2nd is not so important.

Hit Next



Set the "root" password and do not forget it. You will need it to manage your MySQL server. I do not advise creating an anonymous account unless it is a development server and you just do not care. Whether you enable root access from remote machines or not is up to you so do some research on that. For this articles needs I am not choosing it.

Hit Next



Hit Execute and wait



If all goes well you will see this. (I actually got an error message about not being able to connect... I went to to Administrative tools/services and restarted the MySQL service and hit retry which cured that... it probably only did this to me since I have installed this before.. new installs probably will not have any trouble)

Hit Finish

Your done.. You just installed the MySQL Server (TIP: its usally a good idea to reboot and make sure the MySQL servce is running by default)

Now, moving on..

Lets install the MyODBC drivers.. (now called Connector/ODBC)

This one is a bit of a no-brainer so I am not going to go into detail.
Just run (mysql-connector-odbc-3.51.12-win32.msi) and run through all the defaults until it is done.. Choose typical when that comes up.

Your done setting up MyODBC on the server. If its not your server I guess you don't need to worry about installing all of this as its your hosts job to do that.

The problem was in config_inc.asp. we had renamed the field in the DB but didn't change it in this file.

But we changed it, it is back to normal.

Thanks

Yeah, its a win2k server.

Im up and running now (my guess is ASP wasnt installed, but he did not say), but am not having luck with any of the email.  I contacted my host to see what is available and have yet to hear back.  Do you generally recommend people to run CDOSYS?

Ive been reading through the docs, and the users and protection seems to be pretty straightforward.   Nice!

The only other real question I have (and cant find in the docs) is how to remove the self registration option all togehter.  My client wants to add its users manually, and not give the option for them to sign up themselves.  Do I just find any remove any code that references it?

humm, I dont know.

If you want me too I would be glad to go into your web site and troubleshoot. If so PM me the info I need and I will take a look and see if I can figure it out.

CJW

People who have the option pack have a new feature called groups.

Groups are meant as a replacement for using the access levels as they are much more powerful. Support for pages protected using access levels is left in tact for backward compatiability for a customers older protection code.

A customer recently told me groups could not be used like access levels and that 8 access levels was not enough. This is how I explained that groups can do everything access levels can do.



Groups can honestly do everything access levels can do if you really think about it.
Using groups and protecting pages accordingly you could actually create a system that basically worked identically to the way the access levels works.

For example..

You make 8 groups and assign users to them accordingly

Protection code on page allows access to groups 1-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "1,2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any one of those groups would have access..

Protection code on page allows access to groups 2-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  2-8 would have access..

Protection code on page allows access to groups 3-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  3-8 would have access..

How to set a new users expiration date.

You'll need to edit the "users/add_new_account.asp" with a text editor.

Find this section..

<%
CmdAddUser.Fields("ValidateEmailCode") = ValidateEmailCode
CmdAddUser.Fields("Access_Level") = ""
' PUT YOUR CODE HERE
CmdAdduser.Update
ID = CmdAdduser("ID")
CmdAdduser.Close
Set CmdAdduser = Nothing
ConnPasswords.Close
Set ConnPasswords = Nothing
%>

You'll want to add code like this right between the Acccess_Level  and Updates section

CmdAddUser.Fields("Expiration_Date") = Date + 60

That will give take todays date and add 60 days to it.
You can of course do whatever you want here.

Actually, any database value for the user can be set during registration.

You can also change the default Access_Level to whatever you like.

recent activity infomation is temporary and mantains itself per application start up.. when the web application restarts for whatever reason the info is reset

a reboot, an iisreset on the server, application pool restarts, etc etc
this is done because if that info was saved in the database your database would get huge real quick

logfiles however do not do that and are permanent

I am getting closer.

This error actually does not have anything to do with the forgotten password feature or your database.

It has to do with the settings you chose for emailing.

it relates to aspmail and it not liking the remotehost you used, or something like that.... etc etc

umm.. rename the pages to ".asp"

After all these are ASP scripts we are dealing with and the product is called ASPProtect.

The web site says it is used to protect ".asp" pages

And the directions tell you to put the protection code on ".asp" pages.

ASP can not run in ".html" pages

If you do not know basic things like this you should really learn the basics of ASP before you try to use the application. I would suggest a good book or two. ASPProtect is for people that have at least some experience with Active Server Pages.

The login page sends the user to redirect.asp (which is as follows)

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
If InStr(Session("Groups"),"*1*") Then
    Response.Redirect("gp01.asp")
End If
%>

<%
If InStr(Session("Groups"),"*2*") Then
    Response.Redirect("gp02.asp")
End If
%>

I am not being redirected to gp02.asp if I am a member of group2.  Also, we wish users who are part of group 2 and 3 to go to a different page (ie. gp2-3.asp)

Thanks in advance.