I really do not know.. maybe it is a conflict with something else..

I run many instances of aspbanner on my servers and I have every item to log enabled for my iis log files... my stats server software which reads those log files (livestats and smarterstats) have never reported any 404 errors related to (aspbanner/those images)...

I do not know what is happening in your situation..

sorry.

The pages in the ASProtect Full version that have emailing code in them are as follows.

password_admin/email_user.asp

password_admin/send_mass_email.asp

users/add_new_account.asp

users/email_password.asp

... in addition it is a virtual include not a file.  I just tried to use file instead of virtual and then the ../ includes worked on the asp pages.

This is strange because they used to work like that on the 2000 server I had these sites running on.

Hello

I have a strange problem with the thumbnails in the ASPClassifieds.
If i upload some pictures in an ad, the 2nd picture always shows with an x, as the picture doesn´t exists. But if i click on the 2nd thumbnail, the picture shows okay. I haven´t changed enything from the original code.
Does anyone have any idea, where it goes wrong ?

With best regards, Erling Larsen

basically one at a time because of limitations of the file uploads that browsers can support 

more on that here
http://www.aspphotogallery.com/pro_add_ons.asp


An Admins can however ftp a bunch of pics to the import folder and import them into any album all at once pretty easily

Hi,

I have just one quick question, I know this works with Paypal but does this work with Merchant Account?

How difficult it is to make it workable with Merchant account? I appreciate your answer.

Thanks.

The "forgot your password" feature is not sending passwords to users when they put in their emails.

Any suggestions?

Thanks

Thanks for the info.  We'll do as you suggest.

NPA

If we wanted to user groups, is the "Access Level" in the User setup the same ID as what the group access would be?  Ex. If John had Access Level 4 and the page specified <% GROUPACCESS = "4" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

I'm asking because there is no Group Access Level in the user setup.  Thanks

I know what is happening.. its the old single quote thing messing up the query string..
but it shouldnt be happening with the newer code as I fixed it.

If you like I can go in and reproduce/fix the issue. I can not think of any other way I can help you as other users have not reported the issue.

Chances are if it is happening in one situation it will happen again in the future.. it really all depends on the passwords being used and your encyrption key... other passwords may produce the issue even if the password is correct

basically once the password gets encrypted it by chance has a single quote in it... then it messes up the query

I take care of the situation by replacing the single quote with a double quote but it looks like you found a situation where that didn't work out

when you get back to work.. your   "redirect.asp" needs the password include file at the top of it.. or that wont work either..

and of course those pages you send people to all need to be repaired

Ok, I was not aware of this domain controller issue as I have never had a customer have their web server set up that way. It is not a common situation under commercial hosting, thats for sure.

http://support.microsoft.com/default.aspx?scid=kb;en-us;3151 58

seems it was some sort of bug that was corrected in the the 1.1 .NET framework involving no ASPNET account being created. seems there are lots of work arounds involving making new accounts and editing machine config files. I found quite a few google articles as well.

http://www.kbalertz.com/kb_315158.aspx

http://www.15seconds.com/issue/030115.htm

I actually should have said "the framework installed" not "asp.net"

So, in the meantime I am asking John Evans what he thinks about this and I am going to ask you what version of the framework you have installed ? ASP.NET Framework 2.0 is the newest and you definetely should be running at least version 1.1 and probably should upgrade to 2.0.

I do not know why other ASP.NET code you have works ok. Your other code may not be using the odbc driver dll the same way ASPProtect.NET does. There are lots of possible reasons. At the end of the day I think the basic issue here is still a low level configuration/permissions issue and it can be corrected from what I am reading. It just may require a bit of trial and error regarding local and domain accounts and editing the machine config files... etc etc

Good Morning - I am receiving an Http 500 internal server error when I go to add a new user via the register.asp page.   the url when the error appears is: .../users/add_new_account.asp

I think the error has to do with my email component setting - becuase it works fine otherwise.

I have the email component setting set to CDOSYS (using remote server) with the mail.remote.server set to email.cidra.com - email address set to webmaster@cidra.com

Note: I receive the email notification and the user does get added.

Can you help please? Shirley

UPDATE...I just figured out that it only errors when the email address I use for the user is NOT from cidra.com -- Any idea why?

I am attempting to have the page dedirect from the group, as some of my users are part of different and multiple groups (they are not structured in access levels, b/c they cannot be part of multiple levels(?)).  So I think I need to redirect by group.  I am having trouble having this work correctly.

-j

OK.. I went with using ASPEMAIL.  The above did not seem to work.  No worries though, where there is a will (with options) there is a way.

That is by design, removing and deleting are two different things as far as the classifieds system goes.

A regular user can only remove an ad from the category index. (which makes the ad inactive)

An admin however can truly delete an ad from the system.

I am brought to a logon page in which I cannot access the page.  This must be due to the check_user_inc.asp include.  Without the include I get a blank page.

Tony,

ASPBanner.NET was discontinued about 14 months ago. It is no longer supported in any way because quite frankly the classic ASP version is faster, more stable, has more features, and is a lot easier to install and get running.

If you PM me via the forum you are welcome to a copy of the current ASP Unlimited Version. It can serve banners to any type of page extension. All you have to do is ask for a copy.

Whether or not your existing ASPBanner.NET database is exactly the same structure I do not know, but I believe it is. You should compare the two if you plan to keep using the old database and make any neccessary changes so the old database has the exact same structure as the new version. If there are any differences they are very few.

Or at least I think so.  I have been trying to get this software to work so I can see if it meets our needs for an upgrade purchare. Here is my error.

Microsoft JET Database Engine error '80040e10'

No value given for one or more required parameters.

/aspprotect/scripts/populate_config_variables_inc.asp, line 15

My provider says that the problem is NOT on there end, that it is a problem with the code.  I think that it is a database connection problem.  Can you please help.  Below is my connection string based on what the setup page directed me to do:

ConnectionString = "data source=\\NAWINFS03\home\users\web\b1347\rh.957theride\asppro tect\data\database\ASPProtect_access2002.mdb; Provider=Microsoft.Jet.OLEDB.4.0;Jet OLEDB:Database Password=temp"

When I first set up the program I got this error:

Provider error '8000ffff'
Catastrophic failure
/aspprotect/scripts/populate_config_variables_inc.asp, line 11

Once again, the looked into it and said the permissions were fine and that the code was most likely bad.  But then the errror changed to the one that I first listed.  Which is the one I am currently getting. 

BTW here is the page address

http://www.957theride.com/aspprotect/password_admin/get_me_i n.asp

Thank you!

First pass through, I don't see anything changed in the groups section of the check_user asp file. the logoff asp wasn't touched.

I noticed the demo online (on this site) only has pages protected with access levels; you say it works fine with groups also?

Adding Support For ServerObjects ASPMail

ASPProtect as you know does not support ServerObjects ASPMail component by default.

Here are directions to make it work.

In the ASPProtect admin settings area simply pretend as if you are using the softartisans sasmtp mailer component. ASPMail and that sasmtp component share the same properties… and the code used for them is nearly identical.

So search through the code for any place where email is sent and simply change

Set Mailer = Server.CreateObject("SoftArtisans.SMTPMail")

To

Set Mailer = Server.CreateObject("SMTPsvg.Mailer")

It is about 4 places. They are not too hard to find.

That’s the easy way to get all the emailing functions working with ASPMail

I have activated both activity and log files. The directories exist on my server and don't give any errors.

When I check the activity tab, some times there are a number of items in it.  Other times, there is only my login info.  From what I can see, it is supposed to show the last 50 items of activity at all times.  Am I missing something?

Also, when I click on the log file tab, there is no file or information to see.  Is there something I need to do beyond activating it in the settings area and making sure the directory has write permissions?

Thanks.

You would carefully use the built in features of access to import/export data.

The password for our databases is noted in the documentation. It's pretty hard to miss really. You can also see the database password by looking at the connection string info.

different versions may be different but it is usually "temp" minus the quotes

Thanks, I'll take a look.

Nick

ok, then I need more information.

Was the code changed ? Thats the big one. If it worked and now it doesn't something must have changed. Things just don't stop working on their own. I would try putting the original files back in there for everything but the config and dataconn files just to make sure and see and if it works with the original files. (back up your old ones 1st so you can copy them back of course)

Also, perhaps PM me the site info so I can go look as well.

Your SQL statement to the database is the key.

You want to change the sortby hyperlink on that page so that it will in turn change the dynamic sql statement to sort the way you want

Find

?SORTBY=Date_Created

change it to

?SORTBY=Date_Created+ASC

or maybe

?SORTBY=Date_Created+DESC

One of them is the default anyway, but I cant remember which is which off hand so just try them both till you get the desired result

near the top you can also change the default sortby when thet page is loaded

SORTBY = Request("SORTBY")
If SORTBY = "" Then
 SORTBY = "Name"
End If

there you would use a space though.. not a "+" sign when adding the ASC or DESC

The + sign is only used in the hyperlinks because it means a space for browsers that can't deal with spaces in links

You can also try setting asphttp's user agent property to some browser version like in this example. It might stop that info from showing up when it fetches a page from the server.

<%
Dim BanObj1Http
Set BanObj1Http = Server.CreateObject("AspHTTP.Conn")
BanObj1Http.UserAgent = "Mozilla Compatible (MS IE 3.01 WinNT)"
BanObj1Http.Url = " http://banserver.powerasp.com/aspbanner/aspbanner_inc.asp?Ba nnerZone=1"
Response.Write BanObj1Http.GetURL
set BanObj1Http = nothing
%>

Also... I dont know if these values below will work but I got them from looking at my nt logs.

Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)

Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0)

And here is more info on the asphttp component and it's settings.
http://www.serverobjects.com/comp/asphttp3.htm

The version of aspbanner you have should not matter.

What you are doing here is wrong.

<PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">

PARAM NAME=movie is supposed to link to your ".swf" file.
And thats why all you see is black.

I don't think you quite understood all of that information fully.

Your ".swf" files needs to be coded in FLASH to link to the aspbanner redirect url. You don't change that flash calling code like that.

The ".swf" file links to the aspbanner redirect url which tracks the click and then redirects the user to the Link URL

You basically need to code your ".swf" flash file to go to that aspbanner URL or code your flash file so it can take a parameter for the url it clicks to (like the macromedia article talks about. This has to be done when editing the flash file in the flash editor before the file is saved.

If you dont have access to the original ".swf" to edit it and re-save it.. your out of luck as far as tracking clicks goes

I have set up a user to be redirected to a different page when logging in for the first time.

I assumed this function would count the number of times a user has logged in. When the login count was greater than 1, the user would be taken to the default.asp 

This isn't happening. The user is always redirected.  The user login count in the database is now 9.

What am I missing?