sometimes those emails take a bit... all depend on wht you are using to send them and whether a pickup directory is involved

as for the other I do not know.. PM me the site details I can look

if it is a 2003 server parent paths must of course be enabled.. its a requirement of aspclassifieds

Upgrade from V6 to v7.x with an MSSQL SERVER DATABASE

1st of all, backup your existing ASPProtect files and database before performing this upgrade. Please be really careful while performing this upgrade. Version 7.x  is a highly advanced application compared to any previous versions. CJWSoft under no circumstances is responsible if you lose information or have website downtime.

BOTTOM LINE: (PERFORM THIS UPGRADE AT YOUR OWN RISK)

To do this upgrade you're going to need to have SQL Enterprise Manager and SQL Query Analyzer

That being said, on with the upgrade..

Open your SQL database in SQL Enterprise Manager

Regarding the following Tables

Rename "Users" to "ASPP_Users"
Rename "Groups" to "ASPP_Groups"

If you do not have a "Groups" table do not worry about it right now.

Now right click and DELETE the Config Table.
Yes, delete it..

Now, go into Design View for the "ASPP_Users" Table.

Rename the "Password" field to "Old_Password"
Be sure to spell it perfectly using the Underscore

If you have a "Groups" Field... leave it alone
If you do not have a "Groups" Field add one and make it a "nvarchar" field with a lengh of 255.

Now, we are going to add a few more new fields.

Add a field called "Redirection_URL" make it a "nvarchar" field with a lengh of 150.
Add a field called "PayPal_Subscriber_ID" make it a "nvarchar" field with a lengh of 100.
Add a field called "Newsletter" and make it a "bit" field
Add a field called "Password" and make it a "nvarchar" field with a lengh of 100.

Now close that window and save the changes..

Download these scripts.
2005-02-23_171110_aspprotect_v7_sql_upgrade_scripts.zip

Now open up SQL Query Analyzer
Connect to your SQL server.

Then load the script  "aspprotect_v7_config_table.sql" into the Query Analyzer.  Click the green play button at the top. If everything goes well the response should read something like this.

******************************************************
(1 row(s) affected)
******************************************************

Now, if you had a Groups Table your done with the database changes.

If you didnt have a groups table.

Then load the script  "aspprotect_v7_groups_table.sql" into the Query Analyzer.  Click the green play button at the top.

Now, go back to your database in Enterprise Manager and make sure all 3 tables are there and look ok. You might need to do a refresh or two to see them.

Now make sure an existing or new SQL user has (public / datareader / datawriter) permissions for all three tables. You reference this user in the asp code connection string so this user must be set up correctly. You may need your SQL server admins or hosting company to help you on this step as you may not have access to do this. You may not need to create a user and set permissions as the sql user you were logged in as to use query analyzer may by default get the correct permissions on anything you create.

Regardless, as you can see from this screenshot I have a SQL user called "aspprotectuser" and proceeded to set the permissions for that user. Under database access giving him (public,datareader, and datewriter permissions).


Now, you are done upgrading your SQL Server Database.

The existing passwords still have to be encrytped and moved from the "Old_Password" to the "Password" field

To that we have a special page we run in the application that will take care of that.

So, for now... go install the application, but using the database we just created.
Follow these instructions for the most part...
http://support.cjwsoft.com/forum/forum_posts.asp?TID=181& ; ;PN=1

When you get to the part where you finally get into the admin area and need to make an admin account you will notice that your existing user database is there but none of the users have passwords if you look at them in the edit screen.

That is normal. Simply do what the instructions say and create and admin account using a username that does not exist..

Then log off... then back in as that new admin account. If that works you are ready to convert the passwords.

This part is very easy.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Replacing the part in blue with your website info.

Once you get the page running you will see a login prompt and one form field just like before with the "get_me_in.asp" page

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see a page telling you to click here to encrypt the passwords and copy them over.

So do what it says... dont click more than once and wait.

Eventually it should say it is finished. So go log in to the admin area of the system using the new admin account.

Now edit some users but dont save... you want to see if the passwords are showing up. If they are the conversion worked. If you see nothing or a garbled mess it did not work and you made a mistake during this whole process.

If things went well backup and delete the conversion file below.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

You do not need it anymore.

Once you are positive every thing is running smoothly and everyone's passwords are ok you can go in and delete the "Old_Password" field as well.



If things didnt go well.. try again from scratch and go slowly.
If they still dont go well get ahold of us for help.

We are here to help, but if you really want us to we can be hired to do the conversion.

You should read my article on server side includes… the path to the include file must of course be adjusted depending on where in your web you are.
http://www.powerasp.com/content/code-snippets/includes.asp

You will also notice if you look at the provided example pages that the include paths have been adjusted to make sense.

If it is 2 directories down it should probably look different..

example:)   "../../checkuser_inc.asp"

It’s weird that if you are not getting an error because if the path to the server side include is wrong you should get a nasty server error.

Also..

The ASPProtect system and any pages it protects must also be part of the same Application in IIS. It’s the nature of forms based authentication. Do a google search if you are not sure what an application is in IIS.

Lasty…. If you are logged in at the time

Whether your current session at the site is still active… or you have the cookie set to remember you.

Well, nothing will happen… cause your already logged in and you will just see the page as normal.

Perhaps things are working and you just don’t understand that part ?

You need to go to the log off page.. log off… then close all instances of the web browser windows..

Then come back to the site… then see if it prompts you to log in.

I did the initial steps of downloading the sql scripts and running it in Query Analyser, tables created fine.

I can login for the first time. I exit from the browser and then I cannot login again. This happens for every user and admin.
I noticed that the values in the fields "Login_limit" and "Active" in the ASPP_Users table in the SQL changed to NULL and 0 when login and remained in those values after close the browser.

So iam just struck not able to log in. Pls advice.

glad it is working now

sorry ya had trouble.

               Also, I’ve been trying to modify the code to adapt it for our application -- by removing fields that we do not need such as address, city, state, phone, but I am having trouble getting visual studio to compile.  It could be due to the fact that the rest of the project is in C#.  Or it could be due to some other factor in ASP Protect.

Sorry, should have added,  if i change the connection string, i can also get this...

[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

Two things you can do to test..

make sure there is at least one ".log" file in that directory.. then if you go to the log file screen and it does not show up in the list the physical path you are using is just not correct

remember the physcial path must contain a drive letter (sometimes a network path starting with // is ok if they have it setup as a network drive)

the other thing you can do is use this script to try and write a simple text file in the directory

http://www.devasp.com/samples/writetofile.asp

That will show you if permissions are correct

no, you cannot unless you plan to write a lot of custom code.

That is why the option pack has groups which eliminate the need to use access levels because groups can do everything access levels can and more.

There is an article here regarding that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=32& PN=1

The company that hosts our business web site has been impossible to deal with in assisting me in getting asp protect to work. Getting the rights set correctly took 6 days and then getting parent paths enabled has been impossible. There last response was simply this:

The includes were changed so that if your server does not support "parent paths"
' and the "../" that you could easily change a few files like this and make the
' includes virtual includes instead of file includes. We didnt make them virtual
' includes by default because depending on where in your site you put the application
' the virtual include path would be different. They are also much different on a local
' development server than they would be on your real server
'
' Here are some examples of what you might change these includes to
'
' If you put the aspprotect folder in the root of your domain at your server
' example: www.mydomain.com/aspprotect
' then you would probably use
'
' #INCLUDE VIRTUAL="/aspprotect/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/config_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/scripts/emailing_subs_inc.asp"
'
' Or if you didnt use the aspprotect folder and just put the contents of it in the root
' of your domain
' then you would probably use
'
' #INCLUDE VIRTUAL="/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/config_inc.asp"
' #INCLUDE VIRTUAL="/scripts/emailing_subs_inc.asp"
'
' It really all depends on what works for your situation
' If you want more information on server side includes read this article at PowerASP
'
' http://www.powerasp.com/content/code-snippets/includes.asp

I am assuming that they will not enable parent paths and I need to modify some code. I do not know asp. WHere do I modify the code for a server that will not enable parent paths?

Thanks,

D

if you use either of those options the mail server info you use must of course be valid (example: mail.somesite.com) your host can provide that info

you should also make sure your sending the emails using an account at your email server.. not some other email you have


other than that if it does not send emails it could be because your hosting company may require authentication for outgoing emails...

ask them ...

if that is the case the version of ASPBanner you have does not support sending email that way and you would need to add the necessary code to any places that send email... in order for emailing to work

Hi,

I am just wondering if anyone else has had this problem. Even though the guestbook is empty, it takes just about 20 to 30 seconds for the guestbook/default.asp lto oad. Is this normal has anyone else has had this problem.

Thanks

Chris, that fixed it.  Found 2-references to guestbook2 in the file show_messages_inc.asp located in the \guestbook\ directory.

Suggestion for future release.  Create an option to email the admin when a message is posted.  If this code already exists please advise.

Thanks, Lance

how you connecting... lets see the connection string...

could be permissions related too.. if they are not set correctly
(always give them to the folder, never just the mdb file)

Some of this might help...

http://support.cjwsoft.com/code/moreinfo11-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

you may want to download some of the different versions of the access database from the support area and try connecting to them as you may have older odbc drivers on the server

You may also want to try to get ASPTest from our website working before you go any further

You should not have single quotes around the "-1" because Album_Active is not a string field in the database. It's true/false or bit field in the database depending on the database you are using (MSSQL or ACCESS)

I'd do it a little more like this I think.

SELECT COUNT(Album_ID) AS Alb_Count FROM " & tbl_label_albums & " WHERE User_ID = " & CmdListUsers("User_ID") & " AND Album_Active = 1"

I took out the parentheses as well since I dont believe they are needed in a simple case like this

but is hard to say unless your the one testing it... my version might have a mistake as I am a little rusty with my SQL at the moment

also: in case your wondering...
depending on the situation and the odbc drivers the 1 and -1 should work either way but sometimes it's picky and you have to do it one way or the other

Now that I think about you may very well be able to use the existing login_form_inc.asp page

the header and footer files for the users area may be ok as well.

probably the smart thing to do is try your old ones and compare them to the new and see if everything you need is there. If not add it by looking at the source html and comparing.

All other files should definetly be replaced with the new.

I have set up a user to be redirected to a different page when logging in for the first time.

I assumed this function would count the number of times a user has logged in. When the login count was greater than 1, the user would be taken to the default.asp 

This isn't happening. The user is always redirected.  The user login count in the database is now 9.

What am I missing?

5 Computers in an office, random hardware and operating systems.  Some wireless some wired - all the same ISP connection.

Some users do not see the PLACE A NEW AD hyperlink.  How can this be hidden?  There is no conditional statement yet some see it and others don't.

To make this problem even more confusing if I take an image and put the place_new_ad.asp hyperlink on that image the users don't even see that image any longer.

How can this be resolved?

this could go on forever...

if you want PM "private message" me info to log into your site.. show me the pages we are dealing with...

and I will take a look at it all...

CJW

It turns out that I never enabled ASP.net on the site. After doing that the skins work much better. I'll have to poke around and see what other functionality is now available.

Thanks!

Al

Thanks very much for the quick reply.

That sets my mind at ease

I was just worried if users would see warnings in their firewall software too.

I realize that the admin would have to have to go through some errors...

And since we are throwing things in here... Definately, if you have your own server you need a Hardware Firewall and a Managed one at that. The internet can be pretty dangerous for business if you don't.

Plus, I agree Black Ice although in it's heyday a few years ago was considered great. It is not suitable for todays standards alone even for the normal user (But, it is required by the company I work with for VPN. I think it's stupid too using old technology. I have 2 more firewalls setup besides that just so that I do have some security. And, that's just for my PC)...

Thanks 

Could be a mod I guess - it would be nice to have an option on the admin settings page to lock down access of all pages and redirect to a specified  "lockdown" page upon attempted login.

If I'm updating the large files on the server and someone attempts a download, they'll get a partial ZIP file or an error.

Hi,

I am using the upload_post_VBSCRIPT.asp to upload the pictures. My concern is the security of this. For instance I've seen some sites get hacked by a user uploading a file (going through the same process) and ending up crashing the entire server.

I tried adding .jpeg to the end of a text file (filename.vbs.jpeg) and then uploading it, and the file was actually uploaded. Is this a potential problem?

Thanks

S

Our home page is not showing up gives this error:

Active Server Pages error 'ASP 0126'

Include file not found

/Default.asp, line 246

The include file 'elib/articles/home_feature1.asp' was not found.

I've downloaded this neat little app, but I'm having troubles understanding what I should be using.  Cassinni or IIS, can you help?  I've tried to look at the help, but it is very vague on what to use in each situation. 

Any help is appreciated. 

Cheers

Some users have reported an error during the registration process.
Here is what I believe is happening.

When you register you get sent a validation email that has a link in it that looks something like this.

http://support.cjwsoft.com/forum//activate.asp?ID=testAD3AD2 97BC

That link can only be clicked on once which will activate your account.

If you somehow run that link more than once you will get a message telling you there was an error.


I think some people are double clicking on the link they get sent and running it more than once.... or clicking on it again after registration is complete. It probably happens very fast so they never see the success screen.

Either way, if you can login to the forum nothing is wrong and you are already activated.

also.. every once in a while I get some nervous person concerned about security... and the pros and cons of having parent paths enabled.

etc etc etc

so let me add this bit of info..

I don’t know what your hosting company will say because it is an iffy topic and those that understand it have a hard time explaining it to someone who doesn't. Also usually the hosting company doesn't have a clue except they heard it was a security risk.