Hi - When I try the mass email feature, I get an error that says:

ODBC Microsoft access driver) too few parameters expected 1

/aspprotect/password/admin/send_mass_email.asp line 280

Oddly...this feature works fine when I use the original admin user that you setup. 

But I setup another one with my username and password (not test) - because I was afraid anything with "test" could get deleted. 

Any ideas on why the new admin userid would not work?  Note: I have not change any code from the original installation.

I am confused.

Humm, how did ASPBanner 8 come with your purchase of ASPProtect ? That is not something I am aware of or something I do. Please provide more information on how you obtained ASPBanner 8. If I gave yu a copy for some reason please refresh my memory so I can go look up th emails about it. I need to know you have a valid license.

Now, as for the two not working together and the login screens messing with each other. I am even more confused. Tell me more as I just do not understand what you did ? ASPBanner has it's own user database and login system so there is no reason you should be mixing the two together as far as logins go. The two applications can certainly be in the same web together and not bother each other. ASPBanner can certainly serve banners to any pages you protect with ASPProtect or don't protect, but you certainly should not be protecting any ASPBanner code with ASPProtect code.  ASPBanner already has code in it to do that. If that is the case don't do that. ASPProtect is not meant to protect code that already has a login system. That should just be obvious as far as I am concerned and hopefully you dintn't try to do that.

(you said you just put the directory in there but there must be more too this than that)

But again, tell me more. I can't really know everything  ??

I just dont see how your ASPProtect pages could be effected by ASPBanner unless you really did something wacky like included the ASPBanner "check_user_inc.asp" instead of the one that comes with ASPProtect or overwrote it... etc ect

If in the same web aspprotect can be wherever and aspbanner needs to be in a folder called "aspbanner". There should be no conflicts under normal use and the two will essentially run seperate of one another.

Chris,

I understand.  I set it to a lower number that will hopefully be a good balance for the user.  I am simply AMAZED at what your software does and I thank you for all you have done.

Jess

Thanks, I really appreciate you working on this. The software works GREAT and the support you give can't be beat. I will definately tell other that are looking for software for their sites to check your first.

one more question.

To use the bulk upload feature of aspuload, do I just need to add another upload section to the same upload page, that will allow more than one file to be selected then tell it to put the files in as Photo 1, 2, 3 etc.? I am a rookie at ASP but I think this is possible and with a little research I should be able to get it going.

Just want to make sure I am on the right track.

Thanks

Not a problem.  Have a good time at your wedding.

thanks!

Hi,

1. Two months ago, we have set up to use the Subscription services exclusively for all new members and renews. and removed the regular payment service, a carry-over from v6.
2. Many from the "pre-subscription" service have yet to expire, thus have a populated expiry field.
3. With a 10 month bridge before we get all the members onto the Subscription service the "Send email to users that are soon to expire."
is used to remind these.
3. When members RENEW using the subscription service, the Expiry Field is not Nulled and they become targets for future reminders although they have renewed as Subscribers.

XYZ signed up on Nov. 05 2004, we send him a reminder in Oct 2005 and he renews as a SUBSCRIBER. His expiry date field is not nulled and he will keep getting notices although he has paid for another year.

Hope this is clearer... Thanks

I just finished implementing the V7 product on our site and someone made mention that on the profile form where you are asked all your personal and user information there are 2 fields for passwords.  The first field uses masking to hide the password as you type it, where the second shows it in clear text.

Now we know that the only people able to see the password are the user and the administrator, but it is playing mind games with my users as they think there is a problem with the application.  I am not a programmer (however, learning ASP slowly now!) and am not sure if you did this on purpose or if it is a bug?

If it was done on purpose, can you advise how I can make the confirm password field masked as well to eliminate the unfounded questions!

Thanks

ok.. Chris.. I am now kicking myself in the butt.  In the setting section, I had to redirect certain urls and directories to the right spot.  I forgot that I renamed the root folder. 

Thank you, thus far for your continued help.  It is greatly appreciate.

You are not supposed to use "../" with a virtual include

Thats goes against what a virtual include is and makes no sense.
When using a virtual include you give the path as if accessing from the root of the main web / virtual directory

I find it very hard to believe it ever worked like that and if it ever did it was wrong.

Sorry Chris,

It didn't fix it.  Looks like I had the current code.  I bought the system in mid-April.  The version says 3-10-2005.

I do know that in the database, the password shows as " éG"  but in the error code, it shows as " éG".  The square character is missing. 

Thanks,
Mick

Edit: well heck.  It skips the square box here too.  The password in the database puts a square box in front of the éG

Microsoft VBScript compilation error '800a0400'

Expected statement

/asplog/check_user_inc.asp, line 404

End If
^

Is this a standard database connection error so I should ask my IIS to make sure permissions are correct?

Thanks..!

Yes worked fine

thanks

If logfiles do not get created it is most likely one of 3 things

1. invalid physical path specified
2. permisssions
3. filesystem object is disabled on the server

that path doesn't look correct to me for a live professionally set up server but only you or your server admins can know that for sure

you will not get any errors when things arent perfect.. just no physical logs

RecentActiveUsers and RecentPageRequrests are not related to the stored logfile feature.. Recent Activity is a different thing

Triple check the upgrade instructions because I think you missed something important.

line 227 on "/password_admin/save.asp" refers to the "Password" field

the error your getting most likely means it is not there..

Pay close attention to the areas in the upgrade instructions regarding renaming your existing "Password" field to "Old_Password"

Then making a new "Password" field and carefully following the instructions needed to convert your old passwords for use with the new system.

If you don't everything carefully and perfectly this is the sort of error you will get.

This is what "John Evans" of CJWSoft has to say on the matter...

"I think that’s pretty much impossible. If the server sees a .JPG or .JPEG extension why in the world would it go and try to read it or do anything with it.

I believe there may have been some issues with Outlook and Outlook express that made it look like a vbs script sent as an attachment was actually a JPG because someone found an exploit in those programs and it would appear as if double extension files were one thing when in fact they were not.

Having a real time virus scanner on the server (which any good host will) should also catch anything infected being built on the server drives as the file uploads. Always worked for me and I had a lot of people uploading ZIP files on winxptheme.com at one point. Many had viruses in them although I suspect it was totally innocent on the end users part. Some people didn’t even know they had a virus on their rig. 

Fact is anything is possible but I think chances of getting a virus or being hacked in some way from this sort of upload are really slim."

Hello,

Thank you for the feedback.

I would like to point out the requirements of the application however as this is something I am aware of and do address.

http://support.cjwsoft.com/code/moreinfo165-1.htm

These requirments are directly linked to from the ASPProtect v7 web page, so its not like I dont try to tell people the deal regarding SQL server.

Basically I only have the resources to provide scipts and instructions for using SQL Enterprise Manager and that is all I officially support. I also personally think anyone using a SQL Server should be using SQL Enterprise Manager because later on down the road there are things you may want to do such as backups/etc etc

Take Care,

Chris Williams
www.CJWSoft.com

Hello,

It is very possible (just basic ASP and database accessing techniques)
It is just not the sort of thing I support in the forums as it is a customization related.

Even for me something like that would take 1-3 hours of coding time. Basically, it is just not something I could just explain to you real quick.

You might want to pick up a good book on ASP or check out some of the great resources out there. http://support.cjwsoft.com/forum/forum_topics.asp?FID=17

Doing stuff like this is relatively easy, but can be time consuming work.


In the future please use a more descriptive topic for yours posts "I need help" is not exactly helpful to anyone else searching through the forums . I therefore renamed your post accordingly.

I really try to keep the forums organized and clean. That's all.

Thanks

Humm, I can see all those pages loading just fine at both domains so you got me pretty confused at this point as you just said they didnt load.

regardless, the data connection tests are failing with both of them.

so let me ask you again how are you setting permissions on the database folders?

ok.. so we got an NT server with a 486 with 256 meg of ram. 

hehe  sorry

anyway.. I have the system running without doing any importing and WOW is it chugging.. I mean it takes a while even to edit/save a user

good news is the filesystem object works as I wrote to a text file

this may end up being a simple case of lack of horsepower..

we may need to do the importing on a faster system and then take the database over cause everthing I see on your server looks correct

even so aspprotect is running so slow.. I have never seen it chug like this

I even tried connecting to a 2000 version of the database and no difference.

I am not totally sure what is going on but the server resources available are scaring me... however this could be something new in the code that I never got a chance to try on NT server.. I dont think so though

how does your other stuff run ?

static pages that do not access a database seem to serve up quickly.

are you running any other dynamic code ?

Is it actually possible, with your product, to password-protect the folder that has the actual database without having to require customers browsing the listings to enter a password, or will password-protecting the database folder prevent customers from browsing the classifeds listings?

We have been using ASP Protect for a while now and are big fans of the program.  We received ASP Banner 8.2 with our puchase which we now have a need for.  I went to put the files on our webpage, and doing nothing else other than locating the directory there, I noticed differences with how ASP Protect operates.  We have customized it a bit and want to keep the 2 programs separate.  the login screen for one showed up on the other, and some ASP Protect pages appeared altered so i immediately deleted ASP Banner.  did I do something wrong, and how can i ensure the 2 programs work completely independant of each other?  We can't risk braking what we're now using but would really like to add banner functionality to some of our pages.  maybe an update to the program before we install?  puchase new software?  Thanks for your help-

Hello,

for an admin..
you view albums for a user.. make a new album... then click manage pictures

for a regular user you log in.. go to user user area.. create an album..then click on manage your albums

It's real easy actually if ya sniff around the source code.
ASP is so easy to (work with/edit) even if you dont know any code.


edit   "save.asp" with a text editor

change

If Request("First_Name") = "" Then
  ErrorMessage = ErrorMessage & Server.URLEncode("You must enter a First Name.\n\n")
End If

to

If Request("Company_Name") = "" Then
  ErrorMessage = ErrorMessage & Server.URLEncode("You must enter a Company Name.\n\n")
End If


From looking at that save code I dont see where Last_Name was required. The only name I saw required was a 1st name.

Also.. making the First_Name not required may break something somwhere else. I dont think it will but it might. You are warned.

MSACCESS 2000

server: windows

option pack: yes (after the install I have this problems with groups and edit users )

host permissions: yes

MESSAGGE:
Active Server Pages error 'ASP0113' Script time out/password_admin/groups.asp The maximum amount of the time for a script to execute was exceeded. ...

New Power Supply and a new (CPU Fan/Heat Sink) seemed to do the the trick. She's running like a champ now...

Hopefully it keeps doing so. Only time will tell.

It she's stable I can get back to designing some new software.

Same here.  Thinking it might be server load or the bandwidth to the server.

Thanks for checking!
Lance

I downloaded v7 3/7/2005

I entered a password that was supposed to be all caps with only first letter caps. 

it is odd, if I go to other user and enter wrong password that does not come up.  it apprpriately goes to a screen that says Access Denied.

thx

Something very strange is happening.  Some users can't see the classified ads in their browser.  This is specific to the user's computer, and they can check other computers and see it fine.

In each case, the user is using windows explorer 6.0 browser with windows xp.

they can't see the ads listed on the ads page, but they can see the categories.

also, they can't see the place ad link on some pages.

Do you think that their browser is blocking the javascript for the mouseover message?

thanks.

just leave the databse where it is, use the connection string generated for you and most importantly... put in a request with alentus for permissions to be set

tell them "D:\Websites\www.mysite.com\aspprotect\data" and all of its child folders need change permissions (r,w,x,d) set so aspprotect can do its thing

until the permissions are set that connection string can not work

this is all noted in the installation docs...