Look in the "check_user_inc.asp" file..

You'll see the name of the cookie there and also get an idea how to access it.

In most versions it looks like this.

Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME")

You'll want the cookie for the username because the session variable will not exist unless they have actually gone to a protected page during that session at the site.

It would probably be best the check for both the session and the cookie. That will make sure people logged in that arent using the cookie option still see the message you want to display.

Sorta like this..

GetUsername = ""
If Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME") <> "" Then
GetUsername = Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME")
Else If Session("Username") <> "" Then
GetUsername = Session("Username")
End If

Response.Write GetUsername

ITS WORKING

...I have earned a beer (dont tell anyone im underage)

just leave the databse where it is, use the connection string generated for you and most importantly... put in a request with alentus for permissions to be set

tell them "D:\Websites\www.mysite.com\aspprotect\data" and all of its child folders need change permissions (r,w,x,d) set so aspprotect can do its thing

until the permissions are set that connection string can not work

this is all noted in the installation docs...

1st: try it with a normal dsn-less connection like we show in the example.. dont use that OLEDB.4.0 connection string.. connecting like that can cause a lot of problems and is not as great as everyone thinks it is and it can sometimes be difficult to get it working when the database has a password set on it

For the sake of troubleshooting just connect like so: (fixing the path of course)

ConnectionString = "DBQ=C:\Inetpub\wwwroot\aspprotect\data\database\ASPProtect_ access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

ASPProtect will generate the actual connection string you should use when you run this page

http://www.mysite.com/data/setup_info.asp

Replacing the part in blue with your website info.


2nd: any IIS server setup to have the access database over the network path like that has a poor setup... and that can cause all sorts of problems as well, access is not designed to run over the network like that.. for more on that read this thread -  Start 5 posts down
http://support.cjwsoft.com/code/code_info.asp?TID=479&KW =OLEDB%2E4%2E0

3rd: If the app does not run using the connection string like I say to use then the problem is 100% on their end and is either related to permissions or the fact they are keeping the access database on a network path which is BAD BAD BAD... no quality host that knew what they are doing would set it up that way.. ultimately you don't want to host asp with a place that has a setup like that

4th: If you want to try some other stuff out we have a free guestbook, asptest, and a free version of aspbanner you can try out as well... www.cjwsoft.com

5th: If you need a quality asp host that knows what they are doing and offers great asp support www.alentus.com is the place

6th: Your right, it is not the code, its the data connection

Thank you....  yes it does

Is there a limit in the number of Zones you can have in the database.

thanking you

OK, I updated the server with the SP 8 Jet updates and this had no effect.

Then I loaded the asptest file and put in the correct path. The results were:

Failed: Database could not be connected to....

Error reported from server:
Error source: Microsoft OLE DB Provider for ODBC Drivers
Error number: -2147467259
Error description: [Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x784 Thread 0x854 DBC 0x2101014 Jet'.

I'll try to help when I get back tues night,, see the contact page for info on where I am
http://www.cjwsoft.com/contact/default.asp?Subject=CJWSoft+G eneral+Inquiry

Your going to have a lot of problems and a lot of the code will have to be re-written.

There are a lot of things in the the code that the MYSQL database system does not support or has issues with . I know because I once made a version of ASPBanner work with MYSQL and it took weeks of work to get it stable.

Null field types can cause problems... but mostly ADO updates which I don't think MYSQL supports at all. All of the ADO stuff would have have to be rewritten.. etc etc

That's probably why you cant get much of the code to write to the database.


Here is a generic example.

An update to an existing record using ADO
http://www.powerasp.com/content/database/ado_update.asp

And update to an existing record using an update query.
http://www.powerasp.com/content/database/using_update.asp

All through the the code the ADO updates would have to converted to update queries which means a lot of work.

I used ADO a lot because I like it and it is little easier to validate data before it is written to the database.

It is also a little easier for customers to understand when they look at the code.

Anyway....

The app just was not designed to work with MYSQL.
It was specifically designed to work with MSSQL and MSACCESS only.

This holds true for all of our applications.

Your running off an IIS 5 Server so I would suggest just using MSACCESS as the database. The Photo Gallery app will run very well using MSACCESS. 

Is there any way to extend the limit multiple login feature to a certain number instead all or none?  In other words, i need to have a user be able to use the same login for x number of people.  My customers are institutions and want to be able to have a single login for however many users they purchase for.

Hi

I have purchased the Standard version about a week ago. Its a great script.

I have been able to select  uploaded banners from day one... but just now i dont seem to be able to select...

i know its hard for you to trouble shoot with such little information.. but i had to ask..

Should i maybe upload the site again ( but same the database first)?

regards

Domenic

Sydney, Australia

Hi Chris,

We installed our key onto the live server.

However, since our temp key has expired, we can't access our application on our development machine because the login won't work anywhere except on the live server.

Of course we can access the application on dev, if we remove the aspprotect tags, but if we need to log in to do something unique to the user, then we have a problem.

Can we get another temp key from you? And would there be a better long term solution to this debug/maintanence issue?

--JP

Hello,

for an admin..
you view albums for a user.. make a new album... then click manage pictures

for a regular user you log in.. go to user user area.. create an album..then click on manage your albums

SQL Server Datareader Datawriter Permissions..

here is a screenshot that shows how to set datareader and datawriter permissions on a database using "SQL Enterprise Manager"

In this example we are making sure the aspbanneruser has those permissions on the aspbanner database in the SQL Server

Ok nevermind that... i got by that wasn't paying attention...

The problem is even before this which i didn't know until now.

I placed the protect tag in a page i called members.aspx

When i go to this page is says ACCESS DENIED etc etc etc.

When i go to login to view this page i get the error..which i DIDNT know because i assumed it was working. This is the error im getting:

Server Error in '/MAP' Application.

---

The resource cannot be found.

Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable.  Please review the following URL and make sure that it is spelled correctly.

Requested URL: /map/users/aspprotectlogin.aspx

btw it says /map because that is the subfolder within the root folder

For pay signups you set the groups during signup it like this thread tells you to

http://support.cjwsoft.com/code/moreinfo186-1.htm

only difference is you need to specify the groups info like so
(basically getting rid of the commas and just leaving behind the group numbers with a * around everything)

Also be sure to have no double asterisks

so, *1*,*2* would just be *1*2*

so, *1*,*2*,*5* would just be *1*2*5*

Just to put an end to this thread here is the solution for anyone reading.

The permissions were ok.

The data connection string never got edited in the "dataconn_inc.asp" file so it was invalid the whole time.

Once that was corrected the application ran.

So really this whole thread was over not following the directions and not editing the data connection string... 

I have noticed that during the file import, that some of the pictures get messed up.  I can import aroun 150 pictures into different albums, say 3 albums with 50 each.

I have noticed however that some of the get messed up.  What is happening is...the thumbnail will be correct, but after you click it the picture that shows up is one form a different album.

Any cure for this?

More Info on Simple File Sharing

http://www.practicallynetworked.com/sharing/xp/filesharing.h tm

http://www.theeldergeek.com/quick_guide_to_simple_file_shari ng.htm

http://support.microsoft.com/default.aspx?scid=kb;en-us;3040 40

I believe what happened is we received the older copy of ASP Banner iwht our purchase of ASP Protect and were notified of a free update to download aspbanner_unlimited_v8.2_feb_26_2005.zip which we did, and that's the one i recently put on our site.

  Sounds from your reply that something technical is going on to the point where I will have to hire one of our Web consutants to dissect for us.  We'll try again and track our issues and send another request for information when we can show you a specific example of what is happening.  I'll be in touch.

We have been using ASP Protect for a while now and are big fans of the program.  We received ASP Banner 8.2 with our puchase which we now have a need for.  I went to put the files on our webpage, and doing nothing else other than locating the directory there, I noticed differences with how ASP Protect operates.  We have customized it a bit and want to keep the 2 programs separate.  the login screen for one showed up on the other, and some ASP Protect pages appeared altered so i immediately deleted ASP Banner.  did I do something wrong, and how can i ensure the 2 programs work completely independant of each other?  We can't risk braking what we're now using but would really like to add banner functionality to some of our pages.  maybe an update to the program before we install?  puchase new software?  Thanks for your help-

The pages in the ASProtect Full version that have emailing code in them are as follows.

password_admin/email_user.asp

password_admin/send_mass_email.asp

users/add_new_account.asp

users/email_password.asp

Okay, hopefully I'm posting in the correct area this time.

Currently we are utilizing ASPProtect 7.x

When using the Newsletter function, many members are indicating they are not receiving email.  No evidence of email in SPAM folders.  Also, when checking with email provider, they insist it is not being filtered prior to delivery to member's email address.

The following message does appear when a newsletter is sent.

error '8004020f'

/newsite/ASPprotect/scripts/emailing_subs_inc.asp, line 124

Line 124 is the line of code to 'send' the emails.  We have approx. 860 members who are on the list to receive the newsletter emails.  I have no way of knowing how many are not getting the email. Based on anecdotal evidence, I'm guessing it could be as high as 20%.

We are using CDOSYS / SMTP authentication with a real external email with MX records. Our website is hosted by Cbeyond.  They insist it isn't at their end. (for what it's worth)

Thanks for your assistance.

NPA

Tell tell me some info about your install?

How am I supposed to know what is going on when you are not showing me what you have in your web config file and also the directory structure of the install or what you are putting in a page you are trying to protect ? It almost sounds like you are not editing the paths correctly in the various places.  I mean yes you told me something about the "map" folder but what I saying is tell me more detail.

BTW: this is a very important setting in the web.config file and must be edited accordingly so the path is right.

<forms name=".aspprotect~net" loginUrl="/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

Basically your showing me random errors and posts left and right and I honestly have no idea what your doing ?

Ulitmately though I am trying to help you in this situation like the web site says.

We offer tech support for installation of the base application purchased in it's native form. In some cases in order to receive proper tech support your application will be need to be installed on a live server on the Internet. We simply cannot troubleshoot all issues when the application is only installed on your local machine.

Meaning I am not going to keep this up if you keep asking question after question after question regardign your local XP Pro installation. There is only so much I can assume or guess when you are running this on a local development server. I know you got all sorts of problems getting a decent live server to run this on but that just isn't my problem. Get this up and running on a professionaly and correctly setup live server and when these random configuration errors pop up atl least I can go run the pages and look at them. Right now I am just confused by nearly everything you have posted today. Half of looks like basic ASP.NET path issues that you need to sort of on your own based on where you installed the application on the machine and what you have in the web.config file.. etc etc etc

It is sounding more and more like ASP.NET is way over your head. If you want a copy of the classic ASP version of ASPProtect you are welcome to it. I think you will be a lotter better off sticking to classic ASP unless you really start reading up on ASP.NET and learning more about how forms based authentication and the web.config file work.

The file check_user_inc.asp as the lines: (which include Session("groups")

 Here we set some valus about the user into session variables
   Session("PasswordAccess") = "Yes"
   Session("Access_Level") = CmdCheckUser("Access_Level")
   Session("Admin") = CmdCheckUser("Admin")
   Session("Active") = CmdCheckUser("Active")
   Session("Expiration_Date") = Expiration_Date
   Session("User_ID") = CmdCheckUser("User_ID")
   Session("Groups") = CmdCheckUser("Groups")
   Session("Redirection_URL") = CmdCheckUser("Redirection_URL")
   Session("Password") = RC4(CmdCheckUser("Password"), PasswordEncryptionKey)
   Session("Username") = CmdCheckUser("Username")

Thanks Chris.

Your solution worked!

Nope,

No changes to any scripts - just a response.write added to Email_Password.asp to print out the SQL.

Sure - here's the address.

www.omegaphibeta.net/aspprotect/users/Email_Password.asp

-Toni

P.S.  E-mail address to look for is serena_5@hotmail.com