Have you thought about language file so users dont have to go into the code to put it in their language??

Chris -

Long time no talk, which is a good thing.  I have purchased another product from you, ASPVendor.  I am running into an issues.

When I try and remove the image through the image manager, it does not remove it.  Screen shot attached.

2005-10-19_194248_image_upload.zip

Thanks

I just installed ASPProtect on my site. The instructions were definately on the target. Very very good instructions.

But... Isn't there always a but ???

I needed to setup my site with MS SQL and it is hosted so I don't have Enterprise Manager. I tried the web based Enterprise Manager and any other one I could find. But, I kept getting errors when trying to use the SQL Script.

I finally had to go back to my work where we do have the licenses and get an SQL Admin to use Enterprise Manager to run the script and it worked finally.

I don't know if this is a common problem ??? But, maybe you would want to look at the SQL Server script or make a different version that would work with the Web Based SQL manager.

Thanks

you actually dont touch any of those
UploadDirectory = CmdGetConfiguration("UploadDirectory")
They get set from the config table in the database which gets edited in the admin area.

so...

I am talking about the settings area in the admin area of the applicaton.
Every setting there is descibed in detail. You get there and change serttings there via the web browser and by logging in as the admin.

Log in to the online demo as admin and check out the settings area if you are confused.
http://www.aspphotogallery.com/demo_pro.asp

I downloaded v7 3/7/2005

I entered a password that was supposed to be all caps with only first letter caps. 

it is odd, if I go to other user and enter wrong password that does not come up.  it apprpriately goes to a screen that says Access Denied.

thx

Great Thank you!

As of thus far the program is working rather nicely.

I am very impressed :)

I wonder what that ENDSQLMail send failure is all about ?
I dont use anything regarding SQLMAIL in the ASPProtect code.

I think I might need to go in so I can debug a bit. Everything seems to work fine with a SQL installation here so I just don't know at the moment.

If that is ok with you I would need ftp access or something so I can trry a few things and hopefully figure it out. Admin access to the aspprotect admin area as well so I can see what you have set up in there.

PM me with that info if you want me to take a look.

Hope the wedding went well.  I have one this weekend.

I was successful at performing an upload.  The free upload software was either not configure properly (probably) or not working.  I downloaded the trial version of softartisan's upload (which is like over $300) and it started working. 

Can more than one photo be uploaded at one time (like a whole folder full of photos) or does each have to be done individually?

Everything seems to work fine and I thank you very much for you quick response!!!

this could go on forever...

if you want PM "private message" me info to log into your site.. show me the pages we are dealing with...

and I will take a look at it all...

CJW

That would be great.

I am sure you know that many virus that are sent via email have the same property. (double extension). The code can be executed even though Windows identifies them as simple text files etc.

Thanks again

<!-- Web.Config Configuration File -->

<configuration>
    <system.web>
        <customErrors mode="Off"/>
    </system.web>
</configuration>

<!-- Web.Config Configuration File -->

<configuration>
    <system.web>
        <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
</configuration>

Post a request in the "custom code work" forum.
Perhaps another customer will want to do the work or help you out with some code.

I am just too busy to do any custom work for quite a while.

Tony,

ASPBanner.NET was discontinued about 14 months ago. It is no longer supported in any way because quite frankly the classic ASP version is faster, more stable, has more features, and is a lot easier to install and get running.

If you PM me via the forum you are welcome to a copy of the current ASP Unlimited Version. It can serve banners to any type of page extension. All you have to do is ask for a copy.

Whether or not your existing ASPBanner.NET database is exactly the same structure I do not know, but I believe it is. You should compare the two if you plan to keep using the old database and make any neccessary changes so the old database has the exact same structure as the new version. If there are any differences they are very few.

also.. every once in a while I get some nervous person concerned about security... and the pros and cons of having parent paths enabled.

etc etc etc

so let me add this bit of info..

I don’t know what your hosting company will say because it is an iffy topic and those that understand it have a hard time explaining it to someone who doesn't. Also usually the hosting company doesn't have a clue except they heard it was a security risk.

I am having problems accessing the admin site at the following URL:

http://www.drsweisberg.com/password_admin/default.asp

It brings up the login page, but when I enter the admin/test, it times out.  The DB is the copy with no password and it resides in a directory on the same server hosting the site but it is not in a folder viewable by web users.  This is how the dataconn_inc.asp is set:

<%
'*** Below are the only two settings you need to edit in this file
 
ConnectionString = "DSN=drweisberg;Driver={Microsoft Access Driver (*.mdb)}"
DatabaseType = "MSACCESS"
%>

The ODBC is setup and the IUSR has read/write/modify permissions.

Any help would be greatly appreciated.

i downloaded the latest version. i also downloaded the sql script provided and ran in sql query analyser to create the tables.

After that i ran a special page to intially get into the system,

then setup a new user, then make them an admin,

and after that i logged out and again when i try to login iam not able to login.  When i check the ASpp_User table I noticed that the values in the fields "Login_limit" and "Active" in the ASPP_Users table in the SQL changed to NULL and 0. But if the value are Nulls or 0 it means it's not active and it's not allowing me to login.

Pls advice

Triple check the upgrade instructions because I think you missed something important.

line 227 on "/password_admin/save.asp" refers to the "Password" field

the error your getting most likely means it is not there..

Pay close attention to the areas in the upgrade instructions regarding renaming your existing "Password" field to "Old_Password"

Then making a new "Password" field and carefully following the instructions needed to convert your old passwords for use with the new system.

If you don't everything carefully and perfectly this is the sort of error you will get.

Hello,

Yes, that is how it works. Unless you make modifications to the code there is no way to easily do what you are talking about.

If you design the site to be intelligent that scenario should never happen.

For example.. you should only be offering links to pages that the current logged in user has access to. You do this by checking the session variables and with simple if-else logic around your html links.

It requires some work but if you dont give them links to pages they dont have access to what you are talking about will not happen.

Here are some simple examples.

Here is an example using access levels.

<%
If Session("Access_Level") = "1"  Then
' show links to pages that allow access level 1
End If
%>

And one for groups..

<%
If Instr(Session("Groups"),"*6*") or Instr(Session("Groups"),"*7*") Then
' show links to pages that allow groups 6 and 7
End If
%>

Ok, I started the database tables from scratch. I did everything using sql enterprise manager and query analizer..

Same thing happens... certain passwords just do not work.

So I did a lot of testing and I have come to the conclusion that this has something to do with the regional settings of that SQL server.

Here is an example.. see the screenshot below.

Username "admin" password "petepetepete"

The top query done in Enterprise Manager is valid and shows the user.

The bottom query is also valid but it does not show the user.

And that is exactly what is happening from the ASP codes point of view.

Now, this means that even though that encrypted password is getting saved to the databse correctly this particular SQL server just cant deal with it from a QUERY.

It works fine on two different SQL servers that I have. It's just got to be something regional related like unicode characters not being dealt with correctly or something odd like that.

I tried changing the collation data for the "Password" field type on that SQL server and it looks right. I don't know what else to do but it is something about that SQL server. There may be a way to change the regional setting through the connection string but I cant find any articles on that right now.

One solution I have for you to get this working there is to eliminate the encryption factor then I dont think you will have these issues.

It's either that or find another SQL server with US type settings or use MSAccess. ASPProtect runs nearly as fast on Access as long as you do not have over 10,000 users or whatever. The system hardly ever accesses the database so it performance under MSAccess is always good.

Let me know what you want to do. I can shows you how to eliminate the encrypytion factor if you want to try that. I think if I make you a custom version of the RC4 function you can just replace that and then the system will use plain passwords.

Your call..

ok, that probably means the physical path you have set for the logfile directory (in the admin settings area) is not correc t

the error pretty much means just what it says

Hi,  Its just a generic error that really doesn't mean much of anything except that something wrong with your data connection.

http://support.cjwsoft.com/code/moreinfo27-1.htm

could be invalid permissions on the database folder... could be any number of things

when setting up your connection I suggest going dsn-less.
http://support.cjwsoft.com/code/moreinfo9-1.htm

It is better/faster and also a lot easier to set up.

noted.

1.) this has been explored and because of the way groups works is not feasable. Because us this I wrote code to allow you to view and sort all users for any group on the actual groups page. You pick a groups and then click the "Show Users" button

2.) noted

that wont work the way you did it because groups are not stored like like.

groups are stored "*1*"
or "*1*,*9,*"

so if you test for them you must do so using the InStr function of vbscript

example:

If InStr(Session("Groups"),"*1*") Then
    ' do whatever
End If

also.. as for the session variable
it should be    Session("Groups")

And in Version 6.... (its all ready to go in version 7) that session variable must be saved in the check_user_inc.asp file near where all the others are saved. If it is not there by default "I dont remember if it is or not" you have to add it like so near where all the others are saved

Session("Groups") = CmdCheckUser("Groups")

If you are wondering if it is being saved correctly you can always response.write out the Session("Groups") to see if it holds a value

Hello,

I have ASPprotect 7 installed on my remote server.  I am able to go to the examples/default.asp page and login in without any difficulties.  If I copy the code from that page and paste it in a new page called the same thing but in a different folder, I get this error;  (Keep in mind that this is essentially the same exact page in a different location of the website)

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file '../../check_user_inc.asp' was not found.
/aspprotect/Pages/default.asp, line 3

I get the same error if I paste the "protection code" I have generated into the top of a current (.asp) page in my site.

Basically, the only pages that work are the ones that came with the program as examples.  Thats great, but now I need to make it work for my pages.  Any thoughts?

how about translating the error to english..

Looks to me off hand that it would have something to do with the SQL server itself not being run in an english lcid/format and causing some sort of date issue.

I would also suggest you start off with a brand new blank SQL ASPBanner database and make sure that works before you attemp t to import any data into it.

Here is the complete page with the error message:

============================================================ ===

Unspecified error



This means there is most likely a problem with the "ConnectionString" info that you specified.

If you are using a DSN-Less Connection with MSACCESS.

Check that the physical path to the database has been specified correctly.
It has to be perfect and correct. It cannot be specified using "http://" or by using "server.mappath".
It has to be specified like the following example.

ConnectionString = "DBQ=C:\Inetpub\wwwroot\advpass_pro\_database\passwords.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=admin;PASSWORD=Xpass"

If this is running on an NT server or Win2000 Server make sure that permissions have been set on the database.
Only the server admins can do this. If you are not the admin you will have to ask for this to be done.

Is there a way to upload photos to individual user directories? I don't want all the picture files in a single directory.

Thanks,

Steve

whether you use SSL or not really does not effect aspprotect in any way

I say, the smart thing to do there is too not start them off at a http:// url

one way to do it is put a simple ASP redirect on that default page and send them to an SSL version of the page instead...

http://www.powerasp.com/content/code-snippets/redirects.asp

another way would be not start them off on a protected page right off the bat and offer links to the the protected area...

in my opinion thats pretty odd to be starting them off on a protected page anyway
SLL maybe, but protected right from the time they hit the default page of the site.. thats just odd.. usually you want o say a little something about the site your at and then link people to protected areas or give them a login form which posts to a protected area.


Regardless if you always want users at your site under https:// you should have code on every single page in your site checking the url info at every page load. Then if someone ever hits a page and is not using the https://  you can do something about it like redirect them to the SSL home poge or redirect to that same page but with the https:// in the url..

I will actually explain how to set access_levels and/or groups...

in "users/add_new_account.asp"