I downloaded the skins, ftp'd them to the skins folder and can see them in the list of available skins. No matter which one I try to apply it keeps solid_color_black.

Al

I dont know about the unspecified errors. I really need more detailed information. (Since it has been working fine for quite a long time you might want to consider installaing the application from scracth again and see if you still get errors)

As for the log in not persiting. Did you by chance turn off cookies in your browser ? They are required for forms based authentication to function. Otherwise, yes you would need to log in to each and every page as you moved around.

Actually, your whole site is like that.

http://www.bones.myftpsite.net/rfamilystuff/

You should definetly fix that..
I can't help ya with it though. You'll have to figure it out.

I know ya can do it...

later

I checked through the code and could not find anything as well. 

However, I do think it may be related somehow to the code as I get the messages popping up in the error log only after I have edited a banner.

If there is nothing obvious, I may just set my error log to filter and automatically delete this type of error.  Not something I prefer to do.

Thanks for the quick response.

Otherwise the program is working very well and I'm happy with it.

UPDATE... on very very busy sites these methods have been reported to fail once in a while..  meaning .NET gets overloaded and instead of a banner its shows some error code.

its not the banner system .. its the .net engine and the calling method

New question...

When someone edits their personal information, such as address, is there any way to set it so that someone in the office can receive an e-mail noting the changes?

Thanks.

I just finished implementing the V7 product on our site and someone made mention that on the profile form where you are asked all your personal and user information there are 2 fields for passwords.  The first field uses masking to hide the password as you type it, where the second shows it in clear text.

Now we know that the only people able to see the password are the user and the administrator, but it is playing mind games with my users as they think there is a problem with the application.  I am not a programmer (however, learning ASP slowly now!) and am not sure if you did this on purpose or if it is a bug?

If it was done on purpose, can you advise how I can make the confirm password field masked as well to eliminate the unfounded questions!

Thanks

Humm, Did you change something in a bad way? Thats my guess.

I need more information on what is going on because by default it does not do that ?

The only possible way I can think of that could cause that is if you changed things around too much and the config_inc.asp file is getting run/included twice on that page your logging in to.

Also, when you sign in "where" ? What page ?

Ahhh....yes, I always forget about the cache.  That's exactly what it was. 

 I had made modifications to the import_pics.asp file, because I added more fields to the db, and made the import folder path dynamic, but I seem to have forgotten to add in the response.expires=0

Once I added this back in it has stopped messing up.

What was happening was, it wasn't overwriting the files, nor were they too big, but you would click on one thumbnail in an album(category) and it would display a picture from a totally different category.  It seems browser cache was the culprit, however.

Thanks for the quick reply, great product tooo!!!

Hi

ASPBanner is great...

I have a little problem I have a ASP site http://www.bythebeach.com.au/

I understand how Zones (location on a pages) works but i need only to display those banners that pertain only to that catorgries or sub catorgries.

How would i do that would ....  Would i have to add a new field in the database...?

Any help would be greatly apprecaited

regards

Domenic

Sydney, Australia

You cant do it from initial lohin, but you can do it from the time of registration signup.
http://support.cjwsoft.com/code/moreinfo170-1.htm

As for the emailing thing it is most likely an email sending issue more than a code problem. For example spam filters incorrectly grabiing those emails or something of that nature..

Best thing to do is try different things for emailing options until you get something that works. I suggest using CDOSYS with a real email server and using a valid email account for yourself at that email domain. SMTP authentication if necessary. This will ensure the emails sent have valid MX records and dont get treated as spam.

far as I can tell it does... that session abandon thing called in the logoff page should be enough to cover everything

once thing to be careful about

If you log in.. then log off... then go back to a page and do a refresh... you  may in fact be reposting the username and password from before.. thus logging yourself right back in

Perhaps not.. all depends on what your doing... but it is something to be careful of when testing 

Chris,

2Checkout.com has added to their required cart parameters:

https://www.2checkout.com/documentation/newparameters.html

Do you have a version of 2checkout2.asp that will support these?

Thanks,

Nick

I was actually able to do similar thing by allowing our dedicated search engine to access the site unchallanged.

<%
If Trim(Left(Request.ServerVariables("HTTP_USER_AGENT"),11)) = "MYPASSWORD" Then  
 SearchFlag = True
End If
 
If SearchFlag <> True Then
If Session("Access_Level") > CHECKFOR or Session("Access_Level") = "" Then 
%>
<!--#include virtual="/Auth/check_user_Code.asp" -->
<head>
<title>My Title</title>

</head>

<body>

My Protected stuff here

</body>

</html>

For this to work, the search engine must pass the PW to the web site. I just was not sure how to do the same thing with IPs. I will play with the code and see what happens. If it works, I will post it here to help others, if this is OK with forum rules.

Thanks,

Mo

[/QUOTE]

I just added couple of lines and it works fine

If (Request.ServerVariables("REMOTE_ADDR")) = "xxx.xx.xxx.xxx" Then 
 ' Session("PasswordAccess") = "Yes"
 SearchFlag = true
End If

I getting a strange error with ASPProtect.

 Microsoft OLE DB Provider for SQL Server error '80040e14'

Unclosed quotation mark before the character string '�_^�'.

/aspprotect/check_user_inc.asp, line 114

If I check the database directly "�_^�" is the exact string for the password.

Any Ideas

Hi,

We use ASP Protect to password protect the pages in the member area ( http://www.pti.org/members.asp )

Of late Once or twice every month our whole site goes down and it gives us a "Microsoft VBScript runtime error 800a006 Overflow: Clnt //global.asa line 33 " error message (with the friendly message turned off). When we reboot the web server things are up as normal.

But this is happening too frequently and creates a bad impression.

Any suggestions on how we could prevent this would be greatly appreciated.

Sorry, I guess you did say you finally found them.
Regardless, sorry then, I tried

I dont know what else to tell ya.. except to search www.aspin.com

Perhaps you will find something you can use there.

OK, I figured out the problem.  Not running ASP becasue the pages are not saved as ASP but rather HTM... OK so I am smart like a tractor but strong like an ox.

User Information

After a user logs in there are variables that you can always access.
They can be used to check various things or to display information
dynamically based on who has logged into the system.

   Session("PasswordAccess")
   Session("Access_Level")
   Session("Admin")
   Session("Active")
   Session("Expiration_Date")
   Session("User_ID")
   Session("Groups")
   Session("Redirection_URL")
   Session("Password")
   Session("Username")
   Session("First_Name")
   Session("Last_Name")
   Session("Company_Name")
   Session("Email")
   Session("Address")
   Session("City")
   Session("State_Province")
   Session("Zipcode_Postal_Code")
   Session("Phone")
   Session("Custom1")
   Session("Custom2")
   Session("Custom3")
   Session("Custom4")
   Session("Custom5")
   Session("Custom6")

You can display them on a page at any time using Response.Write like so

<% Response.Write(Session("FIRST_NAME")) %>

or like this

<% = Session("LAST_NAME") %>

Sorry, there is no option for that.

I'll take it into consideration, but the way the banner rotation logic works would make adding such an option very complicated.

Just give it  an expiration date way into the future if you do not want an ad to expire anytime soon.

I usually just make all my ads expire in like 2020 or something like that since I don't want them to stop running either on some of my sites.

Thanks, I really appreciate you working on this. The software works GREAT and the support you give can't be beat. I will definately tell other that are looking for software for their sites to check your first.

one more question.

To use the bulk upload feature of aspuload, do I just need to add another upload section to the same upload page, that will allow more than one file to be selected then tell it to put the files in as Photo 1, 2, 3 etc.? I am a rookie at ASP but I think this is possible and with a little research I should be able to get it going.

Just want to make sure I am on the right track.

Thanks

I have a user who is trying to login. However, I am getting a error that I can't seem to find.
Username: executive.barcheski
Password: executive@amcpc.com

Encrypted Password: �?=�`م�

Error on check_user_inc.asp line 114

If (Request.Cookies("PASSWORDSYSTEMCOOKIE")("KEEPMESIGNEDIN") = "True") And (Request.Cookies("PASSWORDSYSTEMCOOKIE")("COOKIE_USERNAME") <> "") And KeepSignedInOption And Status <> "Checkem" Then
CheckUserSQL = "SELECT " & tbl_label_users & ".* FROM " & tbl_label_users & " WHERE (Username = '" & RC4(Request.Cookies("PASSWORDSYSTEMCOOKIE")("COOKIE_USERNAME "), CookieEncryptionKey) & "') And (Password = '" & Replace(RC4(RC4(Request.Cookies("PASSWORDSYSTEMCOOKIE")("COO KIE_PASSWORD"), CookieEncryptionKey), PasswordEncryptionKey),"'","''") & "')"
Else
CheckUserSQL = "SELECT " & tbl_label_users & ".* FROM " & tbl_label_users & " WHERE (Username = '" & Username & "') AND (Password = '" & Replace(RC4(Password, PasswordEncryptionKey),"'","''") & "')"
End If

CmdCheckUser.Open CheckUserSQL, ConnPasswords

error received: unclosed quote after '�?=�

Any ideas

Jason Johnson

You need to make sure you created the SQL database using the SQL scripts we provide and that no errors occur whatsoever. That is extremely important. You must use our SQL creation scripts.

Then, when you create the user you need to go back to that user and make sure you check the admin account and save that user again. (many times when setting up a system for someone I find myself forgetting that step and then I have to go back in and check the admin box for the user I created.)

And of course create the user from the ASPProtect admin area web interface. Do not add the user to the database manually because you will have no way to enter the password correct as it is encrypted. And do not change the encryption key after making the user/.

It would also be wise to check the SQL server database at every step to make sure the user info gets created and that all the field info looks correct for the most part.

You also want to be sure to specify SQL as the database type side the connection string info as the SQL directions go over

a remote sql server should not an issue.

thats really all I can think of right now

I really do not know for sure, but I imagine there are customers using their windows hosting. Usually I do not know what hosting company a customer uses and I am usualy the only one that responds to forum questions.

Why not download the current Free lite version and try it out ?

CJW

Everything is running fine.. I can read ads... reply to them. but when I click sign in or register.. I get a server error.

Any suggestions

Thank You

Making progress. I have made the appropriate settings and now I have the option to upload.  When I upload, I get the following message:

 "Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard"

I am using IE6 XP SP2.  I also am using DUNDAS UPLOAD, ASPIMAGE.

I think I set permissions correctly bot not positive.  I have given all auth to everyone for the database etc.

SQL Database Creation (NEW INSTALL)

If you are creating a new database do so using SQL enterprise manager.
Create a new database called whatever you like and keep all the default settings. If using an existing sql database skip that step.

Now open up SQL Query Analyzer

unzip the following sql script and open it in query analyser.
2005-02-20_132116_aspprotect_v7_sql_script.zip

VERY IMPORTANT
On the drop down box at the top right make sure your intended database is selected. Otherwise your changes may effect the wrong database in your SQL server.

Then load the script  into the Query Analyzer.  Click the green play button at the top. If everything goes well the response should read something like this.

******************************************************
(1 row(s) affected)
******************************************************

If so the tables have been created in your existing database.

Now make sure an existing or new SQL user has (public / datareader / datawriter) permissions for the new tables. You will be referencing this user in the asp code connection string so this user must be set up correctly. You may need your SQL server admins or hosting company to help you on this step as you may not have access to do this. You may not need to create a user and set permissions as the sql user you were logged in as to use query analyzer may by default get the correct permissions on anything you create.

Regardless, as you can see from this screenshot I made a SQL user called "aspprotectuser" and proceeded to set the permissions for that user. Under database access giving him (public,datareader, and datewriter permissions).


Now, in the ASP files provided with ASPProtect edit "dataconn_inc.asp" with a text editor and modify the connection string info. Be sure to change the info to match your server,username, and password.

Below is an example of valid connection string.

ConnectionString = "Provider=sqloledb;Data Source=poseidon;Initial Catalog=aspprotect;User Id=aspprotectuser;Password=temp;"

The  "Data Source" setting is either the Network Name for the SQL Server or the IP Address. For local servers you can sometimes use an IP of "127.0.0.1" or the name of the local server.

"Initial Catalog" is the name of your database.

Now, in the ASP files provided with ASPProtect edit "dataconn_inc.asp" with a text editor and set the DatabaseType variable to SQL like so.

DatabaseType = "SQL"

LOL