Ok, if the link to the import/export screen does not show up its probably because you never put the import/export path in the admin settings?

go check that for me.

cause running that page without a path for the files could cause a timeout.. thats why the link doesn't show if the path is not entered (so people won't run it)

it looks sorta like this (there will be a field to fill in which wont show here)

Settings below specify the physical directory path of the export directory. This is used by the system when using the import/export feature. The export directory needs modify permissions for the anonymous webserver account.
ExportDirectory

Yes, thats cool.. post it here for sure.

Also, the way you allowed for your search engine is clever and probably was the easiest way to go.

You could do the same thing with the IP. Much easieri than the way I was thinking of doing it.

grrrrrr

As far as the users thing... my fault that was setup wrong in the settings of the admin login page.

but still dont have a solution for what im trying to do

Whein I went by the numbers off of your directions, which work well up to that point, the import would time out.

At that point I tried to import directly into access...and then it hung trying to login.

okay so I've put in a clean database and created a new record for me as admin.

You are not supposed to use "../" with a virtual include

Thats goes against what a virtual include is and makes no sense.
When using a virtual include you give the path as if accessing from the root of the main web / virtual directory

I find it very hard to believe it ever worked like that and if it ever did it was wrong.

Installed latest verison  Doesn't seem to have corrected problem.  Still with same message.  I wonder if deleting this user and putting him back in might help.  I have not however tried any other user names and passwords.

I did a google search and it turns out that error very well might have to do with ASP trying to send an email and that process failing.

That tells me your emailing from the application is not working so it is probably not something you edited incorrectly.

see this article...

80040211
http://www.aspfaq.com/show.asp?id=2026

Emailing was working as when I did your installation (I think I did it months ago, didn't I) so it must be some incorrect changes to your email settings in the admin settings screen. Try sending an individual email to a user from the admin users screen and see if it works. My guess is you will get the same error and means your email sending options are no longer correct or valid.

If that is the case I would ask you if you changed them or possibly something changed as far as your email setup goes. Passwords ? EMail Server .. etc etc etc

I have just purchased ASP v7 and loaded.  Followed instructions.  Obtained codes not prob.  Get to single field login screen, enter password and following page appears:

Method Not Allowed

The requested method POST is not allowed for the URL /temp/aspprotect/password_admin/get_me_in.asp.

Added folder aspprotect under (temp web) folder - temp, but also tried under root folder of web site.

Still no luck.

I have reviewed the permissions requirements for folders from the support documentation but do not see the 'internal guest' account shown in our system to allow internet access to read/write to the access database. 

How else can we locate the proper account (or is it possible there is none?) to use to allow permissions to access the Data directory if it doesn't show up as 'Internal Guest'?

Thought this would be easy.  A few more pointers should get the database connection to work:

1) How do you decide whether it is a DSN (system datasource) or not? Does just putting the file in the ODBC make it so? 

2)We have other files in there for other server applications, does that mean we’re stuck using DSN’s or is the file independent of that control dialog?

3) Assuming we get rid of using DSN for this database (or not), does the code go referenced in your article http://www.powerasp.com/content/hintstips/permissions.asp apply here or should it just work?

What else are we missing?

Is there anyway to limit the number of Albums each user can make?

Does emailing work under the simplest scenario ? (directly from the users screen)

Thats the way to test it..

All that error means is whatever reason the settings you have chosen are not working. It could be the server. It could be what you chosen. (and yes I realize your pop info from outlook should probably work with the settings you chose)

Whenever I do installs I often have to try 3-5 different emailing scenarios before I come across one that works.

Each time making some changes and sending out test emails from the users screen until I get somewhere. Often time getting a working example of how your Hosting Company wants you to send email from ASP is the info to get your hands on. (what method and settings)

In this case they may have blocked the usee of a remote server and want you to use some other settings for sending email from asp. A lot of times they put that info in their help system.

If I were you I would start by trying the other two CDOSYS options for starters, and then try the remote server option again but using "localhost" as the server, if none of those work consult your host for example code and settings to send email from asp. If you still have no luck I can help for sure.

Realize too when testing the emails may take a bit to arrive. A delay of sorts. Best to type in a quick note about which method you are trying in the email text. That way when you finally get one delivered you'll know which method worked.

Are you reffering to the number of the left of the users name in admin.

I thought it was a counter at first but that number only displays the number of albums they have set up.

I have ASPProtect up and running and I was able to log in with little to now problem after following all of the directions. 

I imported my data base of users (approx 5300) into the access db, and now it times out just letting me log in.

I've got full access to the web server to make any changes on that end that I need.

any ideas?

did you fix it because I see all the pictures just fine ?

http://mcintoshcounty.org/real_estate/view_item.asp?Ad_ID=1

But can you guess as to why the following might be happening:

1) The password is still "temp", and we verified that by checking dataconn_inc.asp ; 2) People are able to place new ads, etc. ; 3) We then download the DB.  Sometimes we are able to open up the DB just downloaded with the password "temp", but only see the USERS table.  At other times, we cannot open the same DB with any password, and get a "password not valid" message even when using the password "temp".

So what can the problem be?

I dont know. Perhaps a fresh installation in a new folder would be a good idea as well if possible..

for troubleshooting sake..

Thanks for the quick reply!

I was thinking it was an ASP config/install issue.

I usually deal with Linux/PHP, so this is all new to me :)

Sorry, should have added,  if i change the connection string, i can also get this...

[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

Hello:

When using the Mass Mail feature and selecting the Users to ‘Active’ and the Access Level I want to send to the system will still send e-mails to the ‘Inactive’ users from the same Access Level.

In other words it sends to everyone in the Access Level regardless if you choose “Active” only.

Any ideas to correct?

Thanks,

-Ricardo

Well, I assumed I'd be able to tweak this thing but it is all so intertwined it doesn't pay to mess with any of the files. Hence, I'm going to have buy a different system only a week or two after buying the unlimited version here.

As I leave I want to give you some impressions here. While the system is low-cost, the 99 dollar version is missing a few pieces that I think would bring the value to 99. It is one thing to talk about the speed/performance, but to a degree that's hard to measure, and to anyone with web advertising on their site, performance will always run second to potential site income.

It definitely needs a user interface and registration for advertisers, and it definitely needs a single variables file for changing the hundreds of variables for which there is no control. I had to search on my own just to change the look and feel.

Lack of multi-zone support is a serious drawback. I would submit that anyone with a serious website needs it, and will gladly pay you 139 over 99 for just that one feature.

Take them or leave them, they are just suggestions.

I did a sign up.. your verify URL is not saved/set in the application variables.

try saving the admin settings page again.. or reboot the server so the settings get reloaded

if you can make sure the web is it's own application in IIS

if it is your server do and "iisreset" from the command prompt

if all else fails you got iis application issues with the site... wait till tommoro to see if the setting gets loaded

The ASPProtect v7.x Documentation is now available as a download in windows ".chm" format. (needs to be viewed on a windows based machine that can read it) If you are using XP with Service Pack 2 follow the instructions below or you will not be able to view the help file.

Download Documentation

You should save this file and then open it.
Just opening it from download may not work and you will not be able to read it correctly.

Please continue to check the support forum threads for the most up to date documentation.


IMPORTANT
If your are using xp with service pack 2 there are some new security features that can block the access of help files you download. So as far as the ".chm" file goes.. you have to download it... right click on it...go to properties... then  choose unblock down in the lower right corner ...then you can open and view the file correctly

ahh, I see..

that is not really something you should change.. it is pretty much always going to say read for any folder

It's hard to say, but adjusting settings like that could inadvertently change folder permissions in a way that could cause problems and be hard to correct. I really don't know that for sure but it is very easy to totally mess up permissions when trying different things. In the past I had to reinstall iis just to get things back to normal. I eventually over time learned what to do and what not to do and have never had a problem since. I am not saying you are one of those people but a lot of people have problems because they play around with things they shouldn't or they go nuts trying to give every account permission starting from root folders... overwriting important default permissions instead of just making changes to a few specific folders.. not understanding the importance of what they are doing..... etc etc

Sometimes you practically have to be a NT expert just to fully understand permissions. I know a lot and I can handle my own server but it's hard to explain the low level basic of NT permissions to others as there is a lot to it under the scenes. A lot of hard core NT/2000 users do all the permissions from the command prompt because there is a lot more control at that level.

Like I said earlier, what you showed me looks right but this isn't a complex issue and the error means what it means. Something isn't right with the permissions.

I would start from scratch if I were you. Perhaps consider doing an install in a new web instead of in your root like you showed me. Or try installing it on another machine for troubeshooting sake.

I am sorry I can't think of some amazing answer on this one, but I think this is just one of those weird situations that requires starting from scratch or trying it on another machine.

dsn-less is the way to go..
http://support.cjwsoft.com/code/moreinfo9-2.htm

you also need to use newer versions of the database as the odbc drivers on the server are sometimes very new and no longer work with access 97 databases

Actually, your whole site is like that.

http://www.bones.myftpsite.net/rfamilystuff/

You should definetly fix that..
I can't help ya with it though. You'll have to figure it out.

I know ya can do it...

later

Hello,

In that version is is not easy to change the values as they were not intended to be edited. You would have to dig through quite a lot of code as those values are hardcoded in quite a few pages. Probably at least 10 or more.

In the pro version there are variables you can change that very easily as that is intended to be easily changed in that version.

thanks for posting this... Since "private" is the default setting from what I read and setting it to "public" cured the issue chances are leaving it at "public" is the way to go.

http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/iissdk/html/33f2780a-eee8-4601-84b7-b489e4c756df.asp

http://www.w3schools.com/asp/prop_cachecontrol.asp

ALSO: since you are one the few people that has ever contributed anything helpful to the forums I am going to reward you with a free copy of the password expiration mod. I am sending you a PM with the download info.

Humm.. that should have worked fine

why are you getting a "OLE DB" error I wonder ?

I need more information. 

Database being used and version ?
Server OS Version?
Connection String being used ?

etc etc

If I also password protect the pricelist pages then someone will have to login twice.

nobody should have to log in twice... ?

session variables keep track of access... once your in - your in and you can browse to and from any password protected pages you like

If it is making you log in each time then cookies are most likely disabled.. session variables requires cookies being on to work.. cookies being on  is a requirement of aspprotect and is how Formed Based Authentication works..

let me know if that is the issue there...

you shouldnt have to be logging in more than once per session

Thats the whole point of the application...

so you are using the subscriptions signup directory right ?
"paypal_signup2" ?

1st.. I would check that the xml parser is working.

It is required for making the post back to paypal.
It is installed on windows 2000 and 2003 and XP by default.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=134& ; ; ; ; ; ;PN=1


Then I would check the actual form page to paypal to make sure it is generating a valid IPN url as a hidden form value.  It's the payment page you actually click on that actually takes you to paypal. For the subscription signup system that page is called "paypal1.asp"


You'll want to go through the process starting with the default.asp of the signup folder untill you get to that page. Then you want to look at the html source of that page in Internet Explorer. Your looking for something like this in the source code and you want to make sure it is valid.

<input type="hidden" name="notify_url" value=http://www.mysite.com/aspprotect/paypal_sub_signup/ipn.asp>

It also has to a url on the internet that paypals server can see. It can not be a local url for your machine. Also: If it is not valid we can try hard coding it.


If all of these things are good I'll have to take a look. I have some text file logging I can do when paypal hits your IPN url that can tell us if it is actually hitting that page like it is supposed to. And I can test the system for you by making some 1 cent payments using my own paypal account until we find out what is going wrong.

It turns out that I never enabled ASP.net on the site. After doing that the skins work much better. I'll have to poke around and see what other functionality is now available.

Thanks!

Al