it has been 3 days since I logged myself in under Admin, and all the user information on the User Activiy screen seemed to be gone.

is there any specific length of period it refreshes its user information??

The main users screen... the 1st screen you see when you go to the admin area..  where you email an individual user..

The settings I am referring to being the various emailing settings on the settings screen, The settings you showed me.

As for emailing via a remote server over dsl. It may not be working because the ISP's block the port (25) to stop people from running email servers over their dsl.

Your POP3 works because POP3 uses port 110.

If you want to send emails from your local server on your dsl you should probably install the SMTP service of IIS if you have not and send emails using that with CDOSYS. Either that or get a commerical DSL account with a static IP that allows for running email servers.

I did the initial steps of downloading the sql scripts and running it in Query Analyser, tables created fine.

I can login for the first time. I exit from the browser and then I cannot login again. This happens for every user and admin.
I noticed that the values in the fields "Login_limit" and "Active" in the ASPP_Users table in the SQL changed to NULL and 0 when login and remained in those values after close the browser.

So iam just struck not able to log in. Pls advice.

Everything is running fine.. I can read ads... reply to them. but when I click sign in or register.. I get a server error.

Any suggestions

Thank You

Still not ready... I have no time to finsih it at the moment..

release date is unknown...

it's ok

one step at a time and at each step testing things.. then when you mess something up you can figure it out a lot easier

UPDATE..

Installed a new rack mount 1u server this week.

3.2 ghz hyperthreading 1 mb l2 cache prescott cpu
2 gb pf pc3200 kingston memory
SATA Raid.. (2) 120 gb drives running hardware raid 1

It is a supermicro 1u server case and server motherboard.
The hard drives are SATA 150 120 gb 7200 rpm Diamondmax Maxtors

All high end server type stuff... It's a very powerful server and has been running great all week. 500+ hours uptime so far.

Running Windows 2003 Server Enterprise
SQL 2000 Enterprise SP3
SmarterMail
SmarterStats
Windows DNS
ZipEnable (which I am reviewing for them)
ServerMask (which I am reviewing for them)
A ton of ASP Components which I have purchased over the years.

So that means I can now focus my attention on creating software again instead of being a system admin. (Due to these server issues over the past few months I am now back to godly status as far as windows system administration goes.. not to mention I am now back up to speed on the latest processors and hardware)

So, getting back to ASP Photo Gallery...

I spent about 20 more hours this week on the new version of ASP Photo Gallery Pro.. I have another 40 or more to put into it as I have a lot I want to do.

I think it will be ready within the next three weeks. I know a lot of you have been waiting for something.

I don't believe that the iframe method is supported in a .NET (aspx) implementation, is it?

JDooley

Hello-

I'd like to set up the system to redirect to a landing page (say home1) after the user logs in.

I have looked at all the documentation and can't find something that explains how to do this. I am thinking that I can set up a log in as the default in my root directory that will have a form with an action=check_user_inc.asp. I have looked at the code there but cannot find a place where I would place a redirect to home1.

Help please

Thanks

ok,

when you say "we have set up to use the Subscription services exclusively for all new members "

I am sorry to have to ask this again but what does that mean exactly ?

how was that accomplished ?

The reason I say this is because when a subscription is created by a user through the normal channels.. meaning they went to the paypal subscription directory and either started a new account or found their old one to start a subscription with.. either way the PayPal Subscripber ID that paypal assigns is added to the database for that user and the expiration date is set to null.

Now, that being said the function that sends expiration emails to users will NEVER send an expiration to a user that has info in their PayPal Subscriber Field in the database. I just double checked that.

So that is where I am confused ? How did all these users get set up to use subscriptions and not have the PayPal Subscriber ID field popluated in the database ?

Seems to me the only way this could happen is if you set some stuff up manually and the PayPal Subscriber ID for each user never got put in the database. That and the expiration date didnt get set to null.

Again, I am sorry to keep asking this but it just seems to me that something else must be going on that I am not clear on regarding how you upgraded these people to use subscriptions.

In the end I think the answer may be to manually make sure each old user now using subscriptions has their PayPal Subscription ID set in the database as well as their expiration date from before set to null.

Is this the full version 7.
Did you make any changes to the code ?
Is the User_ID field still an autonumber field in the Access database ?

I do not see how this could happen unless somehow the autonumber field setting for User_ID was changed in the database?

I wonder what that ENDSQLMail send failure is all about ?
I dont use anything regarding SQLMAIL in the ASPProtect code.

I think I might need to go in so I can debug a bit. Everything seems to work fine with a SQL installation here so I just don't know at the moment.

If that is ok with you I would need ftp access or something so I can trry a few things and hopefully figure it out. Admin access to the aspprotect admin area as well so I can see what you have set up in there.

PM me with that info if you want me to take a look.

(Password Expiration Mod) for ASPProtect Version 7.x

This Advanced Mod requires decent knowledge of Databases and working with ASP. I originally wrote something like this for a customer on a custom project. I then took the time to re-write all the code from scratch so it could easily be plugged in to the current version of ASPProtect as an option. All in all this mod took me over 15 hours of time to develop and will save you a ton of time & money if you were planning on writing something like this on your own. Some parts of this were so difficult to get working that I would never have written this code if I was not paid to do so. (The encrypted array that rotates through the last 12 passwords was quite frustrating to get working)


 
The price on this is 19.95. I am not incorporating this into the base product because it makes things more complicated and isn't for everyone.

Purchase Page

Security is a big concern and making your users change their password every so often is a good idea. Keeping track of previous passwords they used and making them choose something they haven't used before takes the concept even further.

This Mod will add a password expiration date to the application. When the password expiration date is hit the user must confirm their old password as well as pick a new one before they can log in again.

There is a new password expiration directory where they must choose a new password that has not been used before. The new password must be confirmed during this process. (It remembers 12 old passwords the way it is coded) The old passwords are stored in the database in an encrypted array.


Directions:
Back up your existing ASPProtect installation.

Add two new fields to the "ASPP_Users" table in your database.

For an MSAccess Database

Password_Expiration_Date (Date_Time Field)
PreviousPasswords (Memo Field)

For a MSSQL Database

Password_Expiration_Date (smalldatetime)
PreviousPasswords (nvarchar 160 characters)

once that is done

Copy all the new ".asp" pages into your site.


Edit the "PasswordExpirationURL" variable in the "check_user_inc.asp" file

It needs to be the full URL to to the "change_password/default.asp" file


Now edit the "change_password/processchange.asp" file

There are 3 variables you can edit.

PageSentToAfter = "http://localhost/aspprotectmods/password_admin/default.asp"
PassMinLength = 4
PassMaxLength = 8

The "PageSentToAfter" is where you want them sent to after they change the password. It can be whatever you like.
If it is a protected page they should automatically get logged in with the new password they just changed to which is nice.

The other two values should be obvious.

That's it...

Just remember the password change thing is not used in the admin area...
You could easily add code for that on your own though by looking at the the password expiration code I added to the publics "check_user_inc.asp" file

Also:
You will see a new field to edit on the user edit screen for the Password Expiration of course. 

But can you guess as to why the following might be happening:

1) The password is still "temp", and we verified that by checking dataconn_inc.asp ; 2) People are able to place new ads, etc. ; 3) We then download the DB.  Sometimes we are able to open up the DB just downloaded with the password "temp", but only see the USERS table.  At other times, we cannot open the same DB with any password, and get a "password not valid" message even when using the password "temp".

So what can the problem be?

Is there a way to know if it is a SQL server with IIS5? My database type is MSACCESS.

Thanks!
Rhona (rookie)

It appears there was a flag problem. When reading it into SQL Server, it converted the True/False in Access to 1/0 in SQL Server.

Hello,

I dont know exactly how you go about that and it would really depend on a lot of things like when the ad started and how yu wanted t handle that. it would involve custom coding though, not a change in the database.

Thanks.

clark

How to set a new users expiration date.

You'll need to edit the "users/add_new_account.asp" with a text editor.

Find this section..

<%
CmdAddUser.Fields("ValidateEmailCode") = ValidateEmailCode
CmdAddUser.Fields("Access_Level") = "4"
' PUT YOUR CODE HERE
CmdAdduser.Update
ID = CmdAdduser("ID")
CmdAdduser.Close
Set CmdAdduser = Nothing
ConnPasswords.Close
Set ConnPasswords = Nothing
%>

You'll want to add code like this right between the Acccess_Level  and Updates section

CmdAddUser.Fields("Expiration_Date") = Date + 60

That will give take todays date and add 60 days to it.
You can of course do whatever you want here.

Actually, any database value for the user can be set during registration.

You can also change the default Access_Level to whatever you like.

sometimes those emails take a bit... all depend on wht you are using to send them and whether a pickup directory is involved

as for the other I do not know.. PM me the site details I can look

if it is a 2003 server parent paths must of course be enabled.. its a requirement of aspclassifieds

I did a sign up.. your verify URL is not saved/set in the application variables.

try saving the admin settings page again.. or reboot the server so the settings get reloaded

if you can make sure the web is it's own application in IIS

if it is your server do and "iisreset" from the command prompt

if all else fails you got iis application issues with the site... wait till tommoro to see if the setting gets loaded

Is there a way to upload photos to individual user directories? I don't want all the picture files in a single directory.

Thanks,

Steve

I am also getting the "Unspecified Error" message.  I just transferred my site to IIS 5.0 and I get that error now.  However it does not happen everytime.  I can click on a page and it opens fine and then I hit refresh in the browser and I get the "Unspecified Error" message.  What could be causing this?

Hello,

You'll need to find a validation function to test for it.
Either server side or right in the form via client side javascript.

I dont have any experience with validating zip codes here much less UK.

Google it would be my best advice.. or maybe find some free app written in UK format and see how they did it.

Good Luck..

And if ya find anything post it here if ya like

basically one at a time because of limitations of the file uploads that browsers can support 

more on that here
http://www.aspphotogallery.com/pro_add_ons.asp


An Admins can however ftp a bunch of pics to the import folder and import them into any album all at once pretty easily

Thank you....  yes it does

Is there a limit in the number of Zones you can have in the database.

thanking you

It really means just what it says. Your connection string is just not valid and the sql server speicifed can not be reached. The username and password could also be invalid. Since you already had a database set up you should use the same username and password you have always been using. You also need to use the same database name you have always been using. Without actually knowing more and seeing what you are doing it is pretty hard to tell you anymore than that.

The directions and sql scripts given are for setting up a new sql database. Applying them to an existing sql database requires a slightly different approach. Modificiations to the SQL scripts elimintating references to the usernames/password/database we suggest in the scripts is also a good idea.

A data connection is a low level as it gets. Until you get that working you are really not even touching any of the code in the ASPListings application.

If you want I have no problem going into your sql server and web and setting up for you correctly.