thanks... a review at aspin is always appretiated ...no one ever seems to do a review and they help me out a lot.. the aspprotect admin area header has a link

thanks...

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properlly.

The way to cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

http://gibsoncity.info/guestbook/default.asp

Reports 65-messages, however after the first 10 are displayed and you click on the More Messages button, I get the Page cannot be found error.

this issue has been resolved.. see following thread

http://support.cjwsoft.com/code/moreinfo316-1.htm

it's ok

one step at a time and at each step testing things.. then when you mess something up you can figure it out a lot easier

For all you advanced users..

Here are two examples of ASP.NET code you can use on your ".aspx" pages to call banners from the ASP 3.0 version of ASPBaner Unlimited V8

This code is not supported... and you of course must change things accordingly like the variable names and zone numbers to match the zone you want to call banners from as well as the url.

2004-08-27_153832_asp.net_examples.zip

any asp code that accesses an access database, writes to text files, or allows for picture uploading will need permissions set on certain directories

every application out there is going to need permissions set at some point

its just a fact.. and if your hosting company does not give you a way to manage permissions or have it done when you ask they do not know what they are doing and they are not supporting your asp hosting needs

see my article for more info on the whole process
http://support.cjwsoft.com/code/moreinfo136-1.htm
the part newar the bottom talks about hosting companies

whether you use SSL or not really does not effect aspprotect in any way

I say, the smart thing to do there is too not start them off at a http:// url

one way to do it is put a simple ASP redirect on that default page and send them to an SSL version of the page instead...

http://www.powerasp.com/content/code-snippets/redirects.asp

another way would be not start them off on a protected page right off the bat and offer links to the the protected area...

in my opinion thats pretty odd to be starting them off on a protected page anyway
SLL maybe, but protected right from the time they hit the default page of the site.. thats just odd.. usually you want o say a little something about the site your at and then link people to protected areas or give them a login form which posts to a protected area.


Regardless if you always want users at your site under https:// you should have code on every single page in your site checking the url info at every page load. Then if someone ever hits a page and is not using the https://  you can do something about it like redirect them to the SSL home poge or redirect to that same page but with the https:// in the url..

Sorry Chris,

It didn't fix it.  Looks like I had the current code.  I bought the system in mid-April.  The version says 3-10-2005.

I do know that in the database, the password shows as " éG"  but in the error code, it shows as " éG".  The square character is missing. 

Thanks,
Mick

Edit: well heck.  It skips the square box here too.  The password in the database puts a square box in front of the éG

We are emailing a weekly newsletter via the Newsletter feature.  Many clients complain that they are not receiving the newsletter.  The emails are not bouncing back indicating that they possibly are not being sent to begin with. 

Is there any way we can determine if ASP is making it through the entire database of subscribers?

It's MS Access, Version 7 (the Full one).

Anyway, I had inadvertently changed the user_id field type to "number".  When I changed it back to "autonumber", everything went back to normal.

Thanks you very much for your quick reply and sorry to have bothered you.

I just added this line to the paypal1.asp page

<input type="hidden" name="currency_code" value="CAD">

and it worked.  Clearly other values can be entered for other currencies.  Everything was listed in this manual https://www.paypal.com/en_US/pdf/subscriptions.pdf.

Cheers
Roy

How can i get to this to register someone in the database only after the Paypal payment has been accepted.  I was testing it out to see if it makes it to my Paypal account (which it did just fine) then I closed Paypal before paying.  I logged in as the administrator and looked at the member list and the account was created anyway.  How can I stop this from being created until "only" after the Paypal payment has been "approved"?

What if this person never comes back to "try again"? Now the username he used (and is inactive) is not available for anyone else to use.  And it takes up database space.

I am using the Paypal (non-subscription)

Thanks in advance,
scottyFlasher

it is not uncommon for folder permissions to be lost or changed on a server.. a lot of things can cause it

if it was working and now you can not edit or write new data to the database it is most likely permissions

I would triple check permissions... see my articles if there is any doubt on how permissions are set

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

It's not normal at all. My guess you accidently edited the code in a bad way.

(thats the same code the every guestbook in every application I sell uses including ASPGuest which gets downloaded for free about 50 times a day)

No one has ever said it acted funny.

I would do a default installation with the original code somewhere and see if the problem occurs. If it does I can take a look.

In the meantime I wouldn't be running that as it is probably using up massive processor time because of whatever is wrong with it. 

That was wrong of me but not what I meant. It seems as soon as I purchase something like this it doesn't work right and it can't be altered to work with what I have. The support ends up sucking or being none. Listen I’ve gone thru you're product and it's wonderful and does exactly what you say it does so that's a relief. Sorry about my ignorance with .NET but I’m from an ASP world and it's a lot different. You can see what I’m trying to protect here http://www.hotmixxent.com:8087/default.aspx. The final site after testing will be http://mxais.sfmx.org/default.aspx. Again thanks for the support on Christmas Sunday, that’s defiantly beyond the call and I appreciate it a lot.

My Admin user got corupted, and I need to reset the password and user, what is the defualt password for this database, as I do not think I have changes this (hopefully) as of yet.

Regards,

Paul

Microsoft VBScript compilation error '800a03f9'

Expected 'Then'

/aspprotect/password_admin/upload_post.asp, line 6

If Session("Admin") <> "True"



If I upload the text file by FTP and then try to import it it only tends to import the first two existing rows.

All collumns match but not sure if I need to add "User_ID". I have added it and created consequecutive numbers.

Any assistance would be appreciated.

Thanks

Hi,

I need to be able to add about 9 checkboxes to the register.asp. would I be able to use one of the custom fields?

The other thing is once I add the checkboxes the value must be written to the DB and later read when displaying the person's Album.

Any idea on how I can do this.

Thanks

This is great FREE SQL Server Web Data Administrator App from Microsoft..

http://www.microsoft.com/downloads/details.aspx?FamilyID=C03 9A798-C57A-419E-ACBC-2A332CB7F959&displaylang=en

It is an ASP.NET web application that you install locally on your development server and then use to connect to a SQL database whether remote or local.

It can do nearly everything enterprise manager can do.

I have tested it and it works great for me.

I am using ASPProtect's password program, which has been very successful, for managing over 1,500 military veterans' memberships at http://www.vspa.com.  What I am trying to do now is utilize the "Groups" code, as generated by the Admin page, to prevent members with expired accounts (and non-members) from accessing restricted "members only" .ASP pages they may have bookmarked, or found via web search. The code generated and used is as follows:

<%@ LANGUAGE="VBSCRIPT" %>
<!-- Begin ASPProtect Code -->
<!-- Groups with access to this page. ( * ADMIN * Member Current * Member Life * Officer/Staff * ) -->
<% GROUPACCESS = "10,12,14,19" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<!-- End ASPProtect Code -->

The above is placed over the <html><head> statements on the page.

When I am logged in the code works perfectly! When I log off and try the URL again, the page appears in its entirety but with a Login box for Username and Login Password at the top of the page. You may view the problem at: http://www.vspa.com/aspprotect/vspa-password-enter.asp .

What I would like to have happen is expired members and non-members would be sent (or Redirected) to a Login page. I do not want the Login password box to merely be inserted above the page that I am trying to keep them from visiting.

Don Poss,
VSPA Webmaster

If I also password protect the pricelist pages then someone will have to login twice.

nobody should have to log in twice... ?

session variables keep track of access... once your in - your in and you can browse to and from any password protected pages you like

If it is making you log in each time then cookies are most likely disabled.. session variables requires cookies being on to work.. cookies being on  is a requirement of aspprotect and is how Formed Based Authentication works..

let me know if that is the issue there...

you shouldnt have to be logging in more than once per session

Thats the whole point of the application...

There are several pages on my website that a user may go to that are not protected (e.g. home page).  If the user has indicated that they want to be saved on this computer (until they explicitly log off), and their 1st entry point is to an unprotected page, how do I determine whether they have logged in before, and extract the info from the cookie / session variables without forcing them to log in or making the entry page protected?

That would not happen unless you added a target to the login form or you're code had a base target set.

Like so..

<base target="_blank">

I would really need more detailed information. It's nothing the system does the way it ships under normal circumstances. For example you shouldn't see that behavior in any of the example protected ".asp" pages

that is unless you have something odd going on with your browser settings or you made changes to the login form or code around it causing it. (or you are using frames and dont have some of the targets and what not set correctly)

My guess is that it has to be something you added or did, but I really need to know more to offer more than that.

Here is what I have in settings.

ServerSoftware	Microsoft-IIS/6.0
ServerName	www.107threnegades.com
ServerProtocol	HTTP/1.1
PathInfo	/gallery/gallery_admin
PathTranslated	d:\hosting\arisky1\gallery\gallery_admin
FILE SYSTEM OBJECT	Installed
ADODB (ActiveX Data Object)	Version: 1.2 Installed
CDONTS	Version: 2.80 Installed
SMTPMail	Not Installed
JMail	Not Installed
AspEmail	Not Installed
AspMail	Not Installed
SAFILEUP	Not Installed
Dundas Upload	Not Installed
ASPImage	Not Installed
AspJpeg	Version: 1.4.0.1 Installed
ImgWriter	Not Installed
Script Engine
Type	VBScript
Version	5.6
Build	8515

I do not even see ASPUpload listed but when I run the test_asp_components.asp from the extras/more_component_info folder, it shows that it is installed.

67	Upload	Installed	COM Details	Persits - ASPUpload
68	Image	Installed	COM Details	Persits - AspJpeg

Chris,

I have had a couple of users log out of the system as they are supposed to, move to another computer and not be allowed to login because of "they are currently logged in using another IP address" when in fact they logged off properly.  Is there anything that they should be doing differently?

Thanks,

Jess

yes, usernames and passwords are both case sensitive. It increases security.

Hello,

What is the difference between the paypal_sub_signup and the paypal_signup directories?  Also, I know it depends, but what directories and files can I delete from my web server if I am not using them?  I copied the entire set of files that came with the program over to the webserver and I am concerned that there is too much out there.

Jess