http://support.cjwsoft.com/code/moreinfo286-2.htm

http://support.cjwsoft.com/code/moreinfo391-1.htm

http://support.cjwsoft.com/code/moreinfo385-1.htm

The login page sends the user to redirect.asp (which is as follows)

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
If InStr(Session("Groups"),"*1*") Then
    Response.Redirect("gp01.asp")
End If
%>

<%
If InStr(Session("Groups"),"*2*") Then
    Response.Redirect("gp02.asp")
End If
%>

I am not being redirected to gp02.asp if I am a member of group2.  Also, we wish users who are part of group 2 and 3 to go to a different page (ie. gp2-3.asp)

Thanks in advance.

This is what "John Evans" of CJWSoft has to say on the matter...

"I think that’s pretty much impossible. If the server sees a .JPG or .JPEG extension why in the world would it go and try to read it or do anything with it.

I believe there may have been some issues with Outlook and Outlook express that made it look like a vbs script sent as an attachment was actually a JPG because someone found an exploit in those programs and it would appear as if double extension files were one thing when in fact they were not.

Having a real time virus scanner on the server (which any good host will) should also catch anything infected being built on the server drives as the file uploads. Always worked for me and I had a lot of people uploading ZIP files on winxptheme.com at one point. Many had viruses in them although I suspect it was totally innocent on the end users part. Some people didn’t even know they had a virus on their rig. 

Fact is anything is possible but I think chances of getting a virus or being hacked in some way from this sort of upload are really slim."

ASPProtect protects ".asp" pages only.

That is your problem.

Can I have the logon be in a top frame while having the protected pages displayed in a main frame?

Using frames with forms based authentication is not the best thing to be doing. Your much better off not using frames and using includes files to do a virtual frames sort of thing (search google) but if you are going to use frames I would suggest password protecting the frameset page as well as any pages it contains.

If you want to have a login form in a non protected top frame all the time.. that posts to a lower frame that is password protected.. you would do this
http://support.cjwsoft.com/code/moreinfo169-1.htm
but change the target of the form to one of your frames

personally though I think that would be a somewhat goofy setup to have going on


Also, how will it behave if a user moves in between a protected page to a public page and back to the protected page again?

As long as they have cookies enabled which is required for session variables to work... then you will have no issues because once they come back to a page they have permission to they will just be allowed in without login.. at least while that session is still active.. or for a longer time if they choose the remeber me option which keeps track of them with a cookie .

Really, the best thing to do is expirment and see how things behave.

Yup everything looks ok - but why no error?

This just gets better - now the email a friend link says sent successfully and doesn't send out - what the heck...

What would cause it to 'think' it is doing the task yet still fail?

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properlly.

The way to cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

Hello,

VBScript is the most popular ASP scripting language, and has the most support available. I estimate that less than 5% of the ASP coders out there use anything other than vbscript

That being said it specifically says on the aspprotect site ASPProtect is only for use in protecting asp using "vbscript" as the language.

http://www.aspprotect.com/more_info_full_v7.asp

http://www.aspprotect.com/comparison.asp

it is something I specified very clearly for this very reason.

Sorry, but you can not use ASPProtect to protect pages using Language="Javascript". The code is too complex to be mixed with server side Javascript.

To password protect asp pages written using "Javascript" you really need a an application specifically written in and designed to work with ASP pages written using "Javascript". And then of course that application would not be able to protect ".asp" pages written using "vbscript." (I mean never say never, but it would be a ton of work to get both working and I doubt you will ever see a commercial application that does both)

as for switching back and forth between vbscript and javascript you really can't except with very simple code. Doing so with anything complex can be extremely problematic because the order of execution sometimes gets all mixed up because of the complexity of the code being used.

That doesn't mean it can not work....

You would really want to do something like this.


do not specify a default language at the top

surround the aspprotect include file with this

<SCRIPT Language="vbscript">

</script>

surround your javascript code with this

<SCRIPT Language="JavaScript">

</script>

then make sure none the code including the aspprotect include file has any <% or %> tags in it

that means you have to remove that sort of thing everywhere... that means a lot of work if you used a lot of that sort of thing instead of response.writes to write out html type stuff

and again... I don't know if you would ever get it all working

Ok, I was not aware of this domain controller issue as I have never had a customer have their web server set up that way. It is not a common situation under commercial hosting, thats for sure.

http://support.microsoft.com/default.aspx?scid=kb;en-us;3151 58

seems it was some sort of bug that was corrected in the the 1.1 .NET framework involving no ASPNET account being created. seems there are lots of work arounds involving making new accounts and editing machine config files. I found quite a few google articles as well.

http://www.kbalertz.com/kb_315158.aspx

http://www.15seconds.com/issue/030115.htm

I actually should have said "the framework installed" not "asp.net"

So, in the meantime I am asking John Evans what he thinks about this and I am going to ask you what version of the framework you have installed ? ASP.NET Framework 2.0 is the newest and you definetely should be running at least version 1.1 and probably should upgrade to 2.0.

I do not know why other ASP.NET code you have works ok. Your other code may not be using the odbc driver dll the same way ASPProtect.NET does. There are lots of possible reasons. At the end of the day I think the basic issue here is still a low level configuration/permissions issue and it can be corrected from what I am reading. It just may require a bit of trial and error regarding local and domain accounts and editing the machine config files... etc etc

I have just purchased ASP v7 and loaded.  Followed instructions.  Obtained codes not prob.  Get to single field login screen, enter password and following page appears:

Method Not Allowed

The requested method POST is not allowed for the URL /temp/aspprotect/password_admin/get_me_in.asp.

Added folder aspprotect under (temp web) folder - temp, but also tried under root folder of web site.

Still no luck.

Everything seems to work fine and I thank you very much for you quick response!!!

An email I just received from eastcoastguy.. to keep this thread up to date

I am brought to a logon page in which I cannot access the page.  This must be due to the check_user_inc.asp include.  Without the include I get a blank page.

It turns out that I never enabled ASP.net on the site. After doing that the skins work much better. I'll have to poke around and see what other functionality is now available.

Thanks!

Al

It's just a generic error that means one of 1000 different things is wrong.. there is a lot of information on in in these forums as well as links to articles about it.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=27& PN=1

usually it means permissions to the database folder are incorrect or the physical path you are specifying for your dsn-less connection is invalid..

everything has to be perfect

More info on the groups session variable.

Session("Groups") will contain the ID numbers of whatever groups the user is a part of.
It does not store the descriptive name of that group. It will show the same data that is actually stored in the "Groups" field in the database.

for example it might hold a value like this

*2*,*5*,*9*

meaning a user is part of groups 2, 5, and 9

so if you wanted to check to see if a user was part of a particular group you would do something like this

<%
If InStr(Session("Groups"),"*9*") Then
     Response.Write("You are a member of group 9")
End If
%>


Taking this even further, if you really wanted to get a particular group's name or description you would have to query the database like so. In this case we ask it the name and description for group 9.

 Group_ID=9
 Set ConnPasswords = Server.CreateObject("ADODB.Connection")
 ConnPasswords.Open ConnectionString
 Set cmdTemp = Server.CreateObject("ADODB.Command")
 Set CmdEditGroup = Server.CreateObject("ADODB.Recordset")
 cmdTemp.CommandText = "SELECT " & tbl_label_groups & ".* FROM " & tbl_label_groups & " WHERE (Group_ID = " & Group_ID & ")"
 cmdTemp.CommandType = 1
 Set cmdTemp.ActiveConnection = ConnPasswords
 CmdEditGroup.Open cmdTemp, , 0, 1
  
 Group_Name = CmdEditGroup("Group_Name")
 Group_Desc = CmdEditGroup("Group_Desc")

Hello Chris:

Let me run some more test if it's working on your end it should be on mine?  I have made some custom updates to the code but no in that area.

Thanks,
-Ricardo

Version 7 uses.. RC4

The upgrade process is described here in detail including a procedure to convert existing clear text passwords to the encrypted versions. (Your passwords will need to be clear text as the system shipped of course for the conversion to do its thing)

http://support.cjwsoft.com/code/info24.htm

It is also covered in the downloadbale docs
http://support.cjwsoft.com/code/moreinfo221-1.htm

Many people have done the upgrade without any issues and Version 7 is getting great feedback.

Should you decide to go with it there is upgrade pricing.
http://www.aspprotect.com/purchase_v7_upgrade_pricing.asp

If I also password protect the pricelist pages then someone will have to login twice.

nobody should have to log in twice... ?

session variables keep track of access... once your in - your in and you can browse to and from any password protected pages you like

If it is making you log in each time then cookies are most likely disabled.. session variables requires cookies being on to work.. cookies being on  is a requirement of aspprotect and is how Formed Based Authentication works..

let me know if that is the issue there...

you shouldnt have to be logging in more than once per session

Thats the whole point of the application...

basically one at a time because of limitations of the file uploads that browsers can support 

more on that here
http://www.aspphotogallery.com/pro_add_ons.asp


An Admins can however ftp a bunch of pics to the import folder and import them into any album all at once pretty easily

Are there any problems with modifying the default database fields.

I need to have an update from net billing and they use different settings in the database than the default.

Will the interface still be functional?

Chris-

A general question - Can you have multiple instance of the gallery on the same server? 

Is this the full version 7.
Did you make any changes to the code ?
Is the User_ID field still an autonumber field in the Access database ?

I do not see how this could happen unless somehow the autonumber field setting for User_ID was changed in the database?

Hi,

We use ASP Protect 6.0 and the database is SQL Server. Our hosting company is charging a lot for daily and weekly backups for everything. Which directories/folders do we need to backup daily and weekly incase something happenes to the site and we need to restore and get the password-protected are that works with ASP Protect to get working.