its one or the other... you cant protect upload.asp at the same time if upload.asp is included in another page..

I mean sure you can protect upload.asp from running when another page calls it by password protecting the page calling it.

And sure you can protect upload.asp by itself if it also runs all by itself. But you can not include the "check_user_inc.asp" more than once in any order of execution scenario. That includes pages being included.

Generally anytime a page is included in another that included page is not meant to run by itself and wouldn't produce any outcome if run by itself so this would never be an issue.

if you don't want "upload.asp" to ever be run by itself in that scenario put it somewhere in your web site that is not web browser accessible.

I would also suggest you look into using Virtual includes. It will save you a lot of time figuring out this sort of thing "../../../../../" becuase once you figure out the virtual include path you can use the same server side include from any directory level.

http://www.powerasp.com/content/code-snippets/includes.asp

Hi there, I am not exactly what you mean when you say "moved some of the include files to user"

are you saying you are moving files around ? I am not sure what you mean there.

but.. the parent path issue is described in detail here

http://support.cjwsoft.com/code/moreinfo5-1.htm


Having is enabled is actually a requirment of the photo gallery application as stated on the web site
http://www.aspphotogallery.com/aspgallery_pro.asp

You can certainly still use the apllication but as that article says you will need to change any file includes to virtual includes so they will work with parent paths disabled

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen 3 times. Twice on my own server when the power went out for 2 hours and once on a customers server.

Basically the application variable system gets all messed up because it was not shut down properlly.

The ways to possibly cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.
If not... keep reading for the more drastic cures..


Go to the command prompt on the server and type "iisreset"
Sometimes that is enough.

Reboot the server.
Sometimes that is enough.

Stop the web in the IIS console.
Sometimes that is enough.

Stop the individual processes for each web in iis
"you must really know what you doing and be very careful about doing this"

Remove and recreate new applications in IIS for the web in question.


And sometimes it just takes a combination of the things listed above and a few reboots. I don't know the best way to cure it but I do know why it happens and the steps listed above can get things back on track.

Again, this is because the server lost power or crashed as far as I know.
It was not allowed to shut down properly which sometimes happens.

You'll know things are ok again when you see your banners show up on your site.

Well Chris:

I logged off too soon after your last response. Your last idea was the answer. I am running McAfee as my virus-scanner on the mail server I am running. There was a script inhibitor enabled as a worm detection function. When I disabled it, your software responded correctly. I guess I can do without that, although with everything thrown at the net these days, it makes me a little nervous.

Thanks

[QUOTE=cwilliams]
Is that a real term or just something you named it cause they have like a zillion people using that SQL server?[/QUOTE]

yeah thats it, you buy into a part of the sql server so it's an sql server hotel...

I don't believe that the iframe method is supported in a .NET (aspx) implementation, is it?

JDooley

expiration dates are not used in aspprotect's database when signing someone up using PayPal subscriptions because the PayPal system keeps track of all of that and will automatically send posts to the approtect system if a user needs to be deactivated for not paying or for whatever reason.

As you will notice in that thread about subscriptions the paypal signup data you use for the person determines their membership pricing and details..
http://support.cjwsoft.com/forum/forum_posts.asp?TID=186& ;PN=1

Basically the system takes care of everything.
PayPal takes care of everything.

However you want to look at it.

Triple check the upgrade instructions because I think you missed something important.

line 227 on "/password_admin/save.asp" refers to the "Password" field

the error your getting most likely means it is not there..

Pay close attention to the areas in the upgrade instructions regarding renaming your existing "Password" field to "Old_Password"

Then making a new "Password" field and carefully following the instructions needed to convert your old passwords for use with the new system.

If you don't everything carefully and perfectly this is the sort of error you will get.

nope ,sql server has nothing to do with this

I am talking about the folder pictures are stored in.. it needs modify permissions set for the internet guest account like those articles talk about

Is this the full version 7.
Did you make any changes to the code ?
Is the User_ID field still an autonumber field in the Access database ?

I do not see how this could happen unless somehow the autonumber field setting for User_ID was changed in the database?

Please be more specific. What hit count are we talking about ?

User Logging ? Albums ? Something else ?

Please descriube the situation in detail. There are really no settings for any sort of hit count.

All can say right now is take a break and get away from it for a bit. All your going to do is stress yourself out more if you keep working on it.

There is probably a way to make it work but it may require days of fiddling around and reading articles and trying things and even then you may not get it working AND THEN ITS JUST A BAD IDEA ANYWAY. Like John says you are better off running it on a server that is not a domain controller.

OK.  If no return page is set, do they end up on a PayPal confirmation page and have to navigate back to my site by going Back or typing the web address?

Nick

Yes, thats cool.. post it here for sure.

Also, the way you allowed for your search engine is clever and probably was the easiest way to go.

You could do the same thing with the IP. Much easieri than the way I was thinking of doing it.

New Version 8.1 Released

Whats new..
http://www.aspbanner.com/v8_notes.asp

Upgrade Instructions...

Upgrade at your own risk. Though we try new versions are not always perfect due to minor bugs we may miss.

Back up your old setup so you can revert back if necessary..!!!
Save your data connection string info in a text file so you have it.
You can get that by viewing the system info page in the admin area.

Carefully copy all the ".asp" files from the new version to the old.
Your going to want all the .asp files in the aspbanner folder.
Your going to want all the .asp files in the aspbanner/scripts folder

Copy the aspbanner/images folder because there are some new images

Be sure to also copy the "data/config" folder files.folders as well as a lot of that is new including the actual config file. If you dont get the new config file copied in there you will have problems later on with some of the new features.

Be sure to create a new folder in the "data" folder called "tempstats"
Make sure it has proper permissions if you plan on using the delayed stats feature as the stats gets temporarily stored there. 

Go back to the area where you originally setup the data connection and do that again...

From the web browser run the following URL

http://yoursite/data/config/aspbanner_unlimited.asp

Replace "yoursite" with the proper url info relevant to your web site location.

When run via the web server that page will ask for a password. By default it is "temp". You should change it later on for security reasons. That page tells you how.

Now... moving on..

There were no changes to the database except for SQL Server users so you can use your existing database.

SQL Server users that want to use the new stored procedures feature (it's optional) will need to update their SQL database with the stored procedures.

Scripts to do that are provided.


ALSO: I have been running this new version using SQL Server Stored Procedure mode for a 1 week on a special banner server that serves banners to many of my own sites. I have also been using the new Delayed Stats feature.

All I can say is it is running like a champ and the SQL server is using less memory than it ever did before.

There is nothing built in to the system but it is very doable.
However, you need to be a decent asp coder because your going to have to write some code.

Basically you would want to do a check on the screen where a user uploads to count how many pictures they have uploaded.

Then act accordinly and either let them or dont let them proceed.

On a side note the overall filesize limit of the total of all pictures a user can upload can be set when you edit a user.

Have you thought about language file so users dont have to go into the code to put it in their language??

Permissions and Folder Locations

By default and to keep things clean we store everything in folder called "data"

That folder then has it in 4 sub folders

database (where the .mdb and temporary .ldb files are handled)
export (where the aspprotect export files are saved)
logfiles (where the aspprotect logfiles are saved)
user_pics (where the user pictures are saved)

Doing it this way makes it very easy for a system administrator to right click on one folder and set permissions for that folder and all of it's child folders.

Now, that being said.. you do not have to use these folders.

For example if you already have a folder in your web with modify permissions for the anonymous webserver account then you can use that one folder to store all of the 4 things above.

You'd simply edit your data connection string to point to that folder and then edit the other paths in the settings area of ASPProtect.

We did it that way so you would have options in case your hosting company was being difficult with your ASP hosting needs.

You really can not do something like that. You can not use client side code to change a server side session variable.

To make changes server side a form must be submitted or a link clicked on to another page. Then you can do whatever you like but you cant have an onlci event update a session variable like that.

Though I am not sure of exactly what you are trying to do I think you'll need to go about things a little differently.

A correctly configured Microsoft SQL Database is critical to the correct operation of the ASPBanner system.

Table & Field settings must be exactly the way we set them in the database creation scripts provided with the ASPBanner system.

Below are screenshots of the design view settings for all the tables used in the ASPBanner system in case you want to double check them

In addition to the settings above each table has one field that is a primary key with an auto increment of one

In the screenshots above each of those fields has a yellow key next to it.
If the field does not have yellow primary key icon on you just right click and the option to make it one appears.

The SQL column settings for each one of the primary key fields must be set as follows




In addition to these settings the SQL scripts provided with the system auto populate the Banner_Users table with two users. This is very important because without the Admin user the scripts add you wont be able to log in to the ASPBanner system as an admin.

I would say that it isn't all that difficult using mySQL for the backend....the main thing is to make sure you set the primary keys for auto-incrementing in your database.  Alos need to make sure that any DELETE SQL statements are formatted like this

DELETE FROM tblName WHERE tblField=SomeValue

and not

DELETE * FROM tblName WHERE tblField=SomeValue

The same holds true for using MSSQL

I am running .asp pages and using the longer code method to display flash banners on my site.

I have noticed a considerable decrease in the loading of my index page when I have a banner called.  When I remove the banner, all is fine.

Any suggestions?

Dave

Thank you....  yes it does

Is there a limit in the number of Zones you can have in the database.

thanking you

Password Retrieval System

CDO.Message.1 error '80040213'

The transport failed to connect to the server.

/aspprotect/scripts/emailing_subs_inc.asp, line 174

This is running on Windows 2000 server.

Any ideas?

Warren

Thanks

It wasn't a complaint. I just bought it last night and installed it today. But, I must have missed the part about requiring Enterprise Manager for installing it on SQL.

If you want it the link to the Web Based SQL Manager is : http://www.aspenterprisemanager.com/ which is free and the Trialware that I tried is EMS SQL Manager.

Maybe that will help a little in not requiring that people have an MS SQL license to access their hosted MS SQL to install the software.

Thanks

you not seeing the real error

http://support.cjwsoft.com/forum/forum_posts.asp?TID=11& PN=1