Terribly sorry, but we are not software-technical.  So can you please tell us exactly which folder the database would be in.

Thanks in advance.

This is a great article from my old powerasp.com site.
Connections And Server Database Permissions

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properlly.

The way to cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

question 2 is answered best here

http://support.cjwsoft.com/code/code_info.asp?TID=319&KW =paypal

I should also mention that the paypal scenarios used in ASPProtect can not be tested using PayPal's sandbox. Also test using two real PayPal accounts and on a live setup. (You'll allowed two paypal accounts)

then you can log into the other and refund the transctions and of course it makes sense to use low amount like 1 cent and what not.

Also, I'd love to see what you came up with with the integration. I have been working on it here as well and took it in a different direction as I plan to sell directions for it as an add-on for aspprotect. I have it all working here but so far I dont see an easy way to let other people do it as I had to change things in both systems in a lot of places. Utimately if done under a SQL environment triggers should be used at the database level and that is another consideration.

Hello Chris:

Let me run some more test if it's working on your end it should be on mine?  I have made some custom updates to the code but no in that area.

Thanks,
-Ricardo

ok,

IE and firefox do some things differently.

It could very well have to do with MIME types set on the server for your website. pdf probably isnt set as a mime type which can cause issues with file streaming situations.

Mime types are either set in the IIS console for your web site under the http headers tab or you can try setting the content-type header to 'application/pdf' right on the asp page the does the streaming

see this article which shows how to do that
http://psacake.com/web/gj.asp

'Specify a MIME type such as "text/html", "image/gif" or "application/pdf"
Response.contenttype = "application/pdf"
'Useful in cases for unknown file types

You would want to put the code that sets the contentype as close to the top of the asp page doing the streaming as possible.

The company is called Eschelon - there customer service leaves a lot to be desired. I have contacted them again and they said that they require the account holder to manage permissions, they won't make changes. I wish they would have told me that a week ago when I asked them about changing the permissions. They haven't responded to me yet how I am to do that though.

Frontpage ext. are not installed.

Once I hear back from them about how I connect to manage rights I should be all set.

Thanks again for all your help!

I did a google search and it turns out that error very well might have to do with ASP trying to send an email and that process failing.

That tells me your emailing from the application is not working so it is probably not something you edited incorrectly.

see this article...

80040211
http://www.aspfaq.com/show.asp?id=2026

Emailing was working as when I did your installation (I think I did it months ago, didn't I) so it must be some incorrect changes to your email settings in the admin settings screen. Try sending an individual email to a user from the admin users screen and see if it works. My guess is you will get the same error and means your email sending options are no longer correct or valid.

If that is the case I would ask you if you changed them or possibly something changed as far as your email setup goes. Passwords ? EMail Server .. etc etc etc

I have a customer who is asking the following:

... could you make a link from it to our website and is there a way to see what traffic goes from us to them.  They are going to pay a commission on sales, however I need to be able to track who views their site...

Wishful thinking or could you add code to track their IP address and display in the report section?  Not sure that would be enough to satisfy this request.   Suggestions?

Thanks, Lance

I am also getting the "Unspecified Error" message.  I just transferred my site to IIS 5.0 and I get that error now.  However it does not happen everytime.  I can click on a page and it opens fine and then I hit refresh in the browser and I get the "Unspecified Error" message.  What could be causing this?

Great Thank you!

As of thus far the program is working rather nicely.

I am very impressed :)

I installed the ASPProtect.NET project no problem.  I am using VS.NET 2003 on Windows XP SP2 (and fully patched).  I am able to build the project successfully, however I cannot debug the project.  I get an error "Unable to start debugging on the web server. The project is not configured to be debugged."  The web app runs fine just browsing to it.

I know this is an isolated problem particular to this project.  I have MANY other .NET projects that I can debug without any problems.  I have tried going into IIS and turn on the debugging for server-side script debugging and making sure my IIS application setting were configured correctly.

Can anyone shed any light on this at all?  Christopher, is there any reason I should not be able to debug this?  (i.e. the aspprotectlicense.dll)

Thanks,

K

Yes, that’s all I wanted to know. The problem is on my end. The server is not creating the .NET site correctly. I think I got it working now. Thanks.

In case you wanted to know? The only reason I asked you is because you mentioned that you where having trouble with overseas piracy and my account is new. I figured it was my user error by just though I’d ask you first. Hope you have no more piracy issues and have a good rest of the day.

Thanks again for the quick response.

1st off, what application is this in reference too?
This question should be under that application's area in the forum.

2nd, really need more information and details. There are many ways and methods to send emails and they can all effect what gets delivered and what does not. All on an email server side of things. (I always recommend using the CDOSYS option using SMTP authentication with a real external email that has valid MX records) see my article...
http://www.powerasp.com/content/new/sending_email_cdosys.asp

3rd, your not telling me how many users we are talking about. ASP is not a very efficient way to send emails and extremely large amounts of users should be sent emails in a different way then from an asp application. It is just the nature of the technology being used. Some of different emailing methods the application supports may or may not give you better results. It is really best to experiment though honestly the option I mentioned above is always the best in my experience.

4th, if you are not getting a timeout or a scripting error than the ASP part of things is making it through the amount of users. You have to remember that often time emails that get sent out from web sites end up in junk filters for whatever reason. That is just another fact and why it it is usually best to send out serious newletters using a stand alone application like WorldCast or something.

I am doing a lot of guessing here because you really did not tell me much. I also still am not sure what application this is in reference to as 3 of my apps have newsletter features of sorts.

Christopher

Thanks for a speedy reply.  This is what I have used most recently...

ListingsConnectionString = "DSN=longreach;UID=lradmin;PWD=skipper;"
DatabaseType = "SQL"

but that throws an error of:

 [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

I have private messaged you my SQL server IP address.  I am a fast learner with ASP (I think!) but some things really catch me out!

MSACCESS 2000

server: windows

option pack: yes (after the install I have this problems with groups and edit users )

host permissions: yes

MESSAGGE:
Active Server Pages error 'ASP0113' Script time out/password_admin/groups.asp The maximum amount of the time for a script to execute was exceeded. ...

Cool.

Well I'm in the middle of uploading the txt file and it's about half way done and sitting there...so I'm keeping my fingers crossed.

Hi,

I am just wondering if anyone else has had this problem. Even though the guestbook is empty, it takes just about 20 to 30 seconds for the guestbook/default.asp lto oad. Is this normal has anyone else has had this problem.

Thanks

I have just purchased ASP v7 and loaded.  Followed instructions.  Obtained codes not prob.  Get to single field login screen, enter password and following page appears:

Method Not Allowed

The requested method POST is not allowed for the URL /temp/aspprotect/password_admin/get_me_in.asp.

Added folder aspprotect under (temp web) folder - temp, but also tried under root folder of web site.

Still no luck.

I am up to speed on how it works. My goal was to not have just a link to a protected page- so that when a user clicks it they get the "access denied" screen and then have to log in. My goal was to avoid that if possible by having them log in and then redirected to the protected page.

So this isnt possible? The only way for it to work is for a user to click a link to the protected page, get the denied screen, then login and be redirected?

Or is there another way..?

I made my point by rebuttling your "cafepress" with agreeing "YES" that is what i want... now you are changing this around on me. I dont think i can be ANY clearer in what i intend to do. It is extremely clear and i am not sure why its becoming more than it should be. I just want the user to be able to log in from ANY PAGE ON THE WEBSITE AND THEN BE REDIRECTED TO THE PROTECTED PAGE IF THE HAVE THE PROPER CREDENTIALS. It would be nice if this software gave an error message when an incorrect username/password was entered instead of simply refreshing the screen.

I have tried everything to get your CJWSoft code working..I purchased the auto listings software and I am stumped, and actually you stumped my hosting provider, my database is stored in the database directory on the root.

I have even tried your ASPtest and still cannot connect.  My have connected other databases without an issue on this same host, I have named a DNS Auto for my database and ponted to that in my code  but get the following error you see at http://www.burkesauto.com and even when i try you test script found here at http://www.burkesauto.com/asptest.asp .

Also, I found this page which specifically talks about hidden IPN form values to change currencies

https://www.paypal.com/us/cgi-bin/webscr?cmd=p/acc/ipn-info

mc_currency	For payment IPNs, this is the currency of the payment. For non-payment subscription IPNs, this is the currency of the subscription.
	"USD"	The currency of the payment is U.S. Dollars.
	"CAD"	The currency of the payment is Canadian Dollars.
	"GBP"	The currency of the payment is Pounds Sterling.
	"EUR"	The currency of the payment is Euros.
	"JPY"	The currency of the payment is Yen.

humm, did you edit any of the registration code ?
this is not something anyone has ever mentioned and the aspprotect 6 code has not been changed in over a year ?

can I see where there is happening ?
I may need ftp or frontpage access to the server in order to troubleshoot unless you can provide me with more details here.

thx..

Hi,

I am using the upload_post_VBSCRIPT.asp to upload the pictures. My concern is the security of this. For instance I've seen some sites get hacked by a user uploading a file (going through the same process) and ending up crashing the entire server.

I tried adding .jpeg to the end of a text file (filename.vbs.jpeg) and then uploading it, and the file was actually uploaded. Is this a potential problem?

Thanks

S

Ok, if the link to the import/export screen does not show up its probably because you never put the import/export path in the admin settings?

go check that for me.

cause running that page without a path for the files could cause a timeout.. thats why the link doesn't show if the path is not entered (so people won't run it)

it looks sorta like this (there will be a field to fill in which wont show here)

Settings below specify the physical directory path of the export directory. This is used by the system when using the import/export feature. The export directory needs modify permissions for the anonymous webserver account.
ExportDirectory

so use the connection string the readme.txt in the sql installation folder file tells you to... it has the correct username.. I just posted that info above

or change the username in the connection string so its rigfht

or go into sql and give any user you want access to the database and use them

Any connection strings that come in the datacon_inc.asp file the way it ships are examples. We fully expect people to edit them.

Also.. the SQL scripts primarly goal is give you a properly set up database with correct files and table settings. Users and permissions often need a little extra attention from the installer as that part doesn't always get set right by the scripts It really all depends on what sql user you are when you execute the scripts. Many times the user someone logs in with doesn't have permission to make users and set permissions.

Hi, its just not something i can suppport as I do not support custmizations to the code epecially when dealing with an image component that is not supported by the application.

Sorry, its something you have to figure out. Bascially I would suggest looking at the existing asp image resizing code and using that as a guide.

Have you considered just buying a license of ASPImage and asking the host if they will install it after you purchase it. It sounds like it may save you a lot of time.

If you are ever looking for a good host for ASP. www.alentus.com is one of the best. There 9.95 plan gives you access to 3000.00 of commercial quaility asp components also which is nice.

Hi,

I have just one quick question, I know this works with Paypal but does this work with Merchant Account?

How difficult it is to make it workable with Merchant account? I appreciate your answer.

Thanks.

humm, I dont know.

If you want me too I would be glad to go into your web site and troubleshoot. If so PM me the info I need and I will take a look and see if I can figure it out.

CJW