1st off, what application is this in reference too?
This question should be under that application's area in the forum.

2nd, really need more information and details. There are many ways and methods to send emails and they can all effect what gets delivered and what does not. All on an email server side of things. (I always recommend using the CDOSYS option using SMTP authentication with a real external email that has valid MX records) see my article...
http://www.powerasp.com/content/new/sending_email_cdosys.asp

3rd, your not telling me how many users we are talking about. ASP is not a very efficient way to send emails and extremely large amounts of users should be sent emails in a different way then from an asp application. It is just the nature of the technology being used. Some of different emailing methods the application supports may or may not give you better results. It is really best to experiment though honestly the option I mentioned above is always the best in my experience.

4th, if you are not getting a timeout or a scripting error than the ASP part of things is making it through the amount of users. You have to remember that often time emails that get sent out from web sites end up in junk filters for whatever reason. That is just another fact and why it it is usually best to send out serious newletters using a stand alone application like WorldCast or something.

I am doing a lot of guessing here because you really did not tell me much. I also still am not sure what application this is in reference to as 3 of my apps have newsletter features of sorts.

Microsoft VBScript compilation error '800a0411'

Name redefined

/aspprotect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^

someone has to do something other than me.. i've given up

if i give u the username/pw can you set this up on the network solutions host and ask them to set whatever permissions are needed?

cant do it anymore....

I had not rebooted after installing the Jet driver updates, so I tried that and the asptest page worked fine, and said that all the tests were successful and that the data connection was setup correctly. I then installed aspprotect again, but with the same results. I cannot log-in from the get_me_in.asp page. It still says that it is opening the page, but does not respons for an indefinite period. The asptest page is in the same directory.

I have looked for alternate databases for this product on your site, but I cannot seem to find them.

This has not been officially released yet, but it is ready.
Here is the overview...
http://www.aspprotect.com/demo3/paypal_signup2/overview.asp

And the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

A few people are using it and say it works very well.

Like the IPN Single Purchase System it is a separate directory you copy into the web site. One change must be made to your database so it’s pretty easy to get working. 

Though I am not guaranteeing this you should be able to accept Single IPN payments and IPN Subscriptions at the same time without the two bothering each other. I haven’t tested it but one customer is doing it and said it is working fine. It just involves manually specifying the IPN URL for one of the systems so it overrides the default IPN URL on your paypal settings. (As each system needs its own IPN URL) Its easy to do… just a form field you would add to the subscription form. I already looked it up. See below. 

Specifying Your Notification URL

If you only need to receive your IPNs at a single URL, you can enter that URL in the Preferences section of your Profile. If you would like to receive payment notifications for different payments at different URLs (i.e. if you need to separate payments made to different websites you run), you can manually pass the IPN URL with each payment by including it in that payment’s HTML code. Use the notify_url field to pass this information. The notify_url for a specific payment will be saved, and any subsequent updates to that payment (e.g. cleared eCheck) will be sent to that notify_url. When you pass a notify_url in your HTML code, it will override any preferences you set in your Profile. 

Anyway.. the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

Tell tell me some info about your install?

How am I supposed to know what is going on when you are not showing me what you have in your web config file and also the directory structure of the install or what you are putting in a page you are trying to protect ? It almost sounds like you are not editing the paths correctly in the various places.  I mean yes you told me something about the "map" folder but what I saying is tell me more detail.

BTW: this is a very important setting in the web.config file and must be edited accordingly so the path is right.

<forms name=".aspprotect~net" loginUrl="/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

Basically your showing me random errors and posts left and right and I honestly have no idea what your doing ?

Ulitmately though I am trying to help you in this situation like the web site says.

We offer tech support for installation of the base application purchased in it's native form. In some cases in order to receive proper tech support your application will be need to be installed on a live server on the Internet. We simply cannot troubleshoot all issues when the application is only installed on your local machine.

Meaning I am not going to keep this up if you keep asking question after question after question regardign your local XP Pro installation. There is only so much I can assume or guess when you are running this on a local development server. I know you got all sorts of problems getting a decent live server to run this on but that just isn't my problem. Get this up and running on a professionaly and correctly setup live server and when these random configuration errors pop up atl least I can go run the pages and look at them. Right now I am just confused by nearly everything you have posted today. Half of looks like basic ASP.NET path issues that you need to sort of on your own based on where you installed the application on the machine and what you have in the web.config file.. etc etc etc

It is sounding more and more like ASP.NET is way over your head. If you want a copy of the classic ASP version of ASPProtect you are welcome to it. I think you will be a lotter better off sticking to classic ASP unless you really start reading up on ASP.NET and learning more about how forms based authentication and the web.config file work.

Here are three known bugs and their fixes...

If you have any of these symptoms these fixes will most likely take care of them.
If you don't have a symptom do not make any changes as you most likely have an updated copy of the application.

Technically if you bought that app on or after April 27th 2004 these bugs should all have been corrected.

Description Fix

(no descriptions showing in pop up window)

Edit pic_window.asp with a text editor

Change

Set f=fs.OpenTextFile(Server.MapPath("pictures/Album_ID_" & Album_ID & ".txt"), 1)

To

Set f=fs.OpenTextFile(Server.MapPath("../pictures/Album_ID_" & Album_ID & ".txt"), 1)

Slideshow Fix…

(last image in slideshow it not showing)

In slideshow.asp

Change

<% For PicArrayIndex = 0 To Ubound(PicArray) - 1 %>

To

<% For PicArrayIndex = 0 To Ubound(PicArray) %>

Add To Favorites fix

(add to favorites feature doesn’t work at all)

Edit "album_uppermenu_inc.asp" in the scripts folder

Change

<a href="users/favorite_albums.asp?Album_ID=<% =Album_ID %>"><img border="0" src="<% =application("skinpath") %>add_to_favorites.gif"></a>

To

<a href="users/favorite_albums.asp?Album_ID=<% =Album_ID %>&Action=Add_To_Favorites"><img border="0" src="<% =application("skinpath") %>add_to_favorites.gif"></a>

Just got back 10 minutes ago..
Missed plane yesterday because of traffic and the flight today was 3 hours plus 4 hours of driving

The fact that you are using Server 2003 is not relevant. I am very familiar with it and all my sites run on it.

The ASPNET account will be there by default once the .NET framework is installed. It won’t just show up in the list, you have to search for it like my article mentions.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

We are emailing a weekly newsletter via the Newsletter feature.  Many clients complain that they are not receiving the newsletter.  The emails are not bouncing back indicating that they possibly are not being sent to begin with. 

Is there any way we can determine if ASP is making it through the entire database of subscribers?

Thank you so much that works great.

I will test with the other settings on the email server again thanks for the advice,

best regards

How do I change the character length for the description field?

you basically have to edit the html in the links in the various pages and remove them... some are in includes files

use a text editor and be causious / back things up before you remove links so you can revert back

I have noticed that during the file import, that some of the pictures get messed up.  I can import aroun 150 pictures into different albums, say 3 albums with 50 each.

I have noticed however that some of the get messed up.  What is happening is...the thumbnail will be correct, but after you click it the picture that shows up is one form a different album.

Any cure for this?

I'm trying to use CDOSYS.

It seems to work fine on the web page, however the mail never gets
delivered.

I can see my messages sitting in c:\inetpub\mailroot\pickup but they never leave it.

I found another folder after doing a search for "pickup".... it is:
d:\program files\Exchsrvr\Mailroot\vsi 1\PickUp     If I paste the files
into there, they get delivered.

How can I get the email to be delivered without doing the cut and paste?

I've tried it both with and without authorization.

I am running a Windows 2000 server with Exchange 2000.

Thanks.

I cleaned up the code as you suggested, and I still can't get the images to display without the whitespace around it.

How do I download the ASP version?  I'll give it a try.

Thanks for your help,
JDooley

Well, thats not normal.
(it should work just like our online demo does)

Do you have everything turned on in the settings ?

Uploading needs to be enabled and you also have to pick a valid upload method.

To be honest I just can't remember what happens. It has been a long time since I did a real live test of that. I know it seemed like a pretty smooth process to me. Right now I can not test it out as I am on a road trip with my motorcycle and I am sending this email from my PDA.

I would ask Dave at this website.
http://www.davephoenix.com/

Or via this username in the forums
PhoenixUK

He can tell you what happens as he has been using the IPN stuff for about a month now.

Perhaps another user could chime in here as well and let us know. I know there are a lot of people using the IPN stuff.

Weird

I dont know about your error on line 6 when uploading..

as far as the manaully edited import file not working I would really need to see it. There has to be somethin wrong with it's format.

I really need more information and possibly acess to the system to do some troubleshooting...

This is anot a feature anyone has ever had an issue like this with.

I have just started to move my sites to a new dedicated Windows 2003 box.  I have parent paths enabled, SSI turned on but I still can't get ../ to work with server side includes.  Everything I read online says that I need to turn on parent paths but again, they are already turned on.

The hosting company where the server is located can't tell me anything, they just say that that is the way it is with Windows 2003.  I don't buy it!

Can anyone tell me anything on this issue to help enable the ../ for serverside includes? 

Hello- I am trying to install the ASPPROTECT product and tried to read all the docs but still am getting the following error:

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1980 Thread 0x1458 DBC 0x223c374 Jet'.

I understand about the physical path for the DSN-less connection and followed the example given. I got in touch with tech support for the host of my site and the give me the following as a physical path:

c:\sites\Single20\laptv1\database

Some observations:

1.- The database directory is outside the root dir but I think I am accounting for it with the path

2.- The permissions are ok

Any ideas?

Thanks

FP

Have you thought about language file so users dont have to go into the code to put it in their language??

Greetings:

I am doing the initial set-up and have run into a problem. Everything has gone smoothly up to and including pulling up the get_me_in.asp page. When I enter the "PasswordEncryptionKey", nothing happens. The page just sits there without doing anything and the browser says it's opening the page, but never does. I have tried entering the value with and without the double-quotes. The value is the correct one from the config_inc.asp file. I did a copy paste from the file twice to insure I transferred it correctly.

I am running Windows 2000 server.

What now?

Warren

Thank you....  yes it does

Is there a limit in the number of Zones you can have in the database.

thanking you

been working on this for about 5 hours today.. I think I found the problem and it involves a vbNullChar that the encryption process is creating only during login attempts

it then messes up during ASPProtect authentication because it blows up the SQL Statement to the database

like I mentioned before the chances off this happening are slim but possible as two people so far have been able to create the situation

I seem to have the HANNAH password working now using your encrption key

I need a little bit more time to clean up the files I have been working on. Then I will give you new "check_user_inc.asp" and "check_admin_inc.asp" files to try out

5 Computers in an office, random hardware and operating systems.  Some wireless some wired - all the same ISP connection.

Some users do not see the PLACE A NEW AD hyperlink.  How can this be hidden?  There is no conditional statement yet some see it and others don't.

To make this problem even more confusing if I take an image and put the place_new_ad.asp hyperlink on that image the users don't even see that image any longer.

How can this be resolved?