Version 7 uses.. RC4

The upgrade process is described here in detail including a procedure to convert existing clear text passwords to the encrypted versions. (Your passwords will need to be clear text as the system shipped of course for the conversion to do its thing)

http://support.cjwsoft.com/code/info24.htm

It is also covered in the downloadbale docs
http://support.cjwsoft.com/code/moreinfo221-1.htm

Many people have done the upgrade without any issues and Version 7 is getting great feedback.

Should you decide to go with it there is upgrade pricing.
http://www.aspprotect.com/purchase_v7_upgrade_pricing.asp

you actually dont touch any of those
UploadDirectory = CmdGetConfiguration("UploadDirectory")
They get set from the config table in the database which gets edited in the admin area.

so...

I am talking about the settings area in the admin area of the applicaton.
Every setting there is descibed in detail. You get there and change serttings there via the web browser and by logging in as the admin.

Log in to the online demo as admin and check out the settings area if you are confused.
http://www.aspphotogallery.com/demo_pro.asp

whether you use SSL or not really does not effect aspprotect in any way

I say, the smart thing to do there is too not start them off at a http:// url

one way to do it is put a simple ASP redirect on that default page and send them to an SSL version of the page instead...

http://www.powerasp.com/content/code-snippets/redirects.asp

another way would be not start them off on a protected page right off the bat and offer links to the the protected area...

in my opinion thats pretty odd to be starting them off on a protected page anyway
SLL maybe, but protected right from the time they hit the default page of the site.. thats just odd.. usually you want o say a little something about the site your at and then link people to protected areas or give them a login form which posts to a protected area.


Regardless if you always want users at your site under https:// you should have code on every single page in your site checking the url info at every page load. Then if someone ever hits a page and is not using the https://  you can do something about it like redirect them to the SSL home poge or redirect to that same page but with the https:// in the url..

Hi,

I only just purchased the product and I would be very keen to

a) is the upgrade available very soon as I don't want to spend the time developing one and than find the other released shortly & 

b) would I only need to pay the difference for the upgrade or have I already downloaded the upgrade already.

I cant see what version I current have.

I look forward to your response.

Thanks.

Nick

I am confused.

Humm, how did ASPBanner 8 come with your purchase of ASPProtect ? That is not something I am aware of or something I do. Please provide more information on how you obtained ASPBanner 8. If I gave yu a copy for some reason please refresh my memory so I can go look up th emails about it. I need to know you have a valid license.

Now, as for the two not working together and the login screens messing with each other. I am even more confused. Tell me more as I just do not understand what you did ? ASPBanner has it's own user database and login system so there is no reason you should be mixing the two together as far as logins go. The two applications can certainly be in the same web together and not bother each other. ASPBanner can certainly serve banners to any pages you protect with ASPProtect or don't protect, but you certainly should not be protecting any ASPBanner code with ASPProtect code.  ASPBanner already has code in it to do that. If that is the case don't do that. ASPProtect is not meant to protect code that already has a login system. That should just be obvious as far as I am concerned and hopefully you dintn't try to do that.

(you said you just put the directory in there but there must be more too this than that)

But again, tell me more. I can't really know everything  ??

I just dont see how your ASPProtect pages could be effected by ASPBanner unless you really did something wacky like included the ASPBanner "check_user_inc.asp" instead of the one that comes with ASPProtect or overwrote it... etc ect

If in the same web aspprotect can be wherever and aspbanner needs to be in a folder called "aspbanner". There should be no conflicts under normal use and the two will essentially run seperate of one another.

thanks... a review at aspin is always appretiated ...no one ever seems to do a review and they help me out a lot.. the aspprotect admin area header has a link

thanks...

Sorry, not really.. not without a lot of changes to the code.
the recent activity info recycles.. it is not meant to be day by day

My suggestion there would be to look at both the log files and the user activty screens...

lets get back to using the forum and not the pm's  please only use the PM's for sensative information. its too hard for me to keep track of all of this as well as help everything else when I got an inbox full of pm's

Ok, so you say no paypal subscription info is being put in the database at all.

I know we have a bunch of people using the paypal subscription code with no issues so I know it works but obviously you got something wrong.

It could be a few things.

Did you enable IPN in the paypal system and put in a postback url like my directions say ?

Are you sure you are not getting paypal single payments and paypal subscriptions mixed up ?

Are the paypal links you made for paypal subscriptions in the correct format like are directions state ? That is critical and another example of something important that you have not shown me.

Did you populate all settings correctly for our paypal subscription code ?
This includes a correct and valid postback url because if that is not right paypal cant communicate with the aspprotect system and no info will get posted back from them at all.

You say your upgrade went well but if you did all all field names perfectly there could be issues with that.

There is just way too much for me to figure out under free support with the info you keep providing me.

I dont think we are going to get anywhere unless I go into your system and spend a considerable amount of time checking everything out. That is not something I do under normal support so if you are interested it is going to involve a fee paid via paypal. It's probably going to take me a while to check everything out and I need you to be 100% sure IPM is enabled in your PayPal account. If you are not sure how to turn it on search their help system as they have plenty of documentation on the process.

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

Our login works great, variables even help determine menu options.  When user logs on, however, it opens in a new page.  Is there a setting somewhere that sets whether you can open in a new or existing page?

Also, when you log off

you have to check the session variables for groups a little differently.. info on that is here

http://support.cjwsoft.com/code/moreinfo198-1.htm

Hi

I've tried almost anything here... I'm using an online SQL SERVER database with ASPProtect 7, and I can't login after my initial creation of the admin account.

It works fine with Access... I believe I have checked all the fields created by the sql statement (which was run with no errors),

What could be the problem here? could it be a problem that I run my local IIS against the online sql server?

sincerely,

Morten

If you want to have a login form on a non protected page that posts
to a protected ".asp" page use code like this.

Change the action of the form to the page you want them to log into.
Make sure to page you send them to is protected by the "check_user_inc.asp" file.

<center>
  <table border="0" width="400" height="200" bgcolor="#000000">
    <tr>
      <td bgcolor="#F4F4F4">
        <form method="POST" action="memberarea.asp">
          <input type="hidden" name="Status" value="Checkem">
          <p align="center"><font face="Arial">ASPProtect Login</font></p>
          <div align="center">
             <center>
             <table border="0" bgcolor="#C0C0C0">
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Username</font></small></stro ng></td>
                 <td><input type="text" name="Username" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Password</font></small></stro ng></td>
                 <td><input type="Password" name="Password" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB" colspan="2"><font face="Verdana, Arial, Helvetica" size="-1"><input type="checkbox" name="KEEPMESIGNEDIN" value="True">Keep
                   me signed in on this computer unless I log off.</font></td>
               </tr>
             </table>
             </center>
          </div>
          <div align="center">
             <center>
             <p>&nbsp;<input type="submit" value="Login"></p>
             </center>
          </div>
       
        </form>
      </td>
    </tr>
  </table>
  </center>

Our knowledge base which is hosted at a remote location is protected by ASPProtect Full Version 6. I would like to allow our employee to access the knowledge base from within our internal network unchallenged. Is there a way which I can modify the code "check_user_inc.asp" to allow any one coming from say 10.1.X.X to access the site unchallenged?

Thanks,

Mo

FYI:

The articles you references were read over by me like 3 hours ago... way passed that and prob. in deeper sh*t than i was since im trying everything possible without knowing the true reason this is not working.

question 2 is answered best here

http://support.cjwsoft.com/code/code_info.asp?TID=319&KW =paypal

I should also mention that the paypal scenarios used in ASPProtect can not be tested using PayPal's sandbox. Also test using two real PayPal accounts and on a live setup. (You'll allowed two paypal accounts)

then you can log into the other and refund the transctions and of course it makes sense to use low amount like 1 cent and what not.

Also, I'd love to see what you came up with with the integration. I have been working on it here as well and took it in a different direction as I plan to sell directions for it as an add-on for aspprotect. I have it all working here but so far I dont see an easy way to let other people do it as I had to change things in both systems in a lot of places. Utimately if done under a SQL environment triggers should be used at the database level and that is another consideration.

It's not normal at all. My guess you accidently edited the code in a bad way.

(thats the same code the every guestbook in every application I sell uses including ASPGuest which gets downloaded for free about 50 times a day)

No one has ever said it acted funny.

I would do a default installation with the original code somewhere and see if the problem occurs. If it does I can take a look.

In the meantime I wouldn't be running that as it is probably using up massive processor time because of whatever is wrong with it. 

Some users have reported an error during the registration process.
Here is what I believe is happening.

When you register you get sent a validation email that has a link in it that looks something like this.

http://support.cjwsoft.com/forum//activate.asp?ID=testAD3AD2 97BC

That link can only be clicked on once which will activate your account.

If you somehow run that link more than once you will get a message telling you there was an error.


I think some people are double clicking on the link they get sent and running it more than once.... or clicking on it again after registration is complete. It probably happens very fast so they never see the success screen.

Either way, if you can login to the forum nothing is wrong and you are already activated.

Chris -

Long time no talk, which is a good thing.  I have purchased another product from you, ASPVendor.  I am running into an issues.

When I try and remove the image through the image manager, it does not remove it.  Screen shot attached.

2005-10-19_194248_image_upload.zip

Thanks

I am a little confused here.  I am in the process of understand how this all works, mainly the email portions as I am running this through a home server (Windows XP).  I have tried test emails, but they are not going threw.  I ran the server_info.asp and it is telling me that I do have CDONTS installed, version 2.8.  Then I tried running, the test_mailer_component.asp.  This page is telling me it is not installed.  This process lead me to start looking at my components for my IIS.  Everything appears to be there. 

Any ideas, where I should go next.  It appears the CDONTS code is in every page that it needs to be in, and it appears that I have it installed, but there is a disconnect between the two..

Chris, if there is no way to change this, I understand. I just though maybe it might be possible and I can't find out if i don't ask.

Thanks Chris.

Let me know.

-john

Hi, I haven't heard anything from you.

Has this issue been resolved ?

Thanks

I did a google search and it turns out that error very well might have to do with ASP trying to send an email and that process failing.

That tells me your emailing from the application is not working so it is probably not something you edited incorrectly.

see this article...

80040211
http://www.aspfaq.com/show.asp?id=2026

Emailing was working as when I did your installation (I think I did it months ago, didn't I) so it must be some incorrect changes to your email settings in the admin settings screen. Try sending an individual email to a user from the admin users screen and see if it works. My guess is you will get the same error and means your email sending options are no longer correct or valid.

If that is the case I would ask you if you changed them or possibly something changed as far as your email setup goes. Passwords ? EMail Server .. etc etc etc

Another good tip is to make a copy of the "password_admin/default.asp" named whatever you like..

"default2.asp" would work...

then maybe add a link to it from the header_inc.asp file

then you can modify that one all you want and your will still have the original around.



That concept works for a lot of things.. for example you could make a copy of the "users" folder and call it "users2"  granted a few paths might need to be changed here and there but really not a lot. (how do you think the paypal signup folders were created, they started as a copy of the "users" folder of course)

You can even make a copy of the "check_users_inc,asp" file if you like. Then make a copy of the "scripts/login_form_inc.asp" file... then make your new "check_user_inc.asp" file reference it.

Then you can password protect pages using different versions of the "check_user_inc.asp" file. Why ? well maybe you want different looking logn forms for different parts of your website or you want to make a lot of changes to the "check_user_inc.asp" file and want to leave the original alone.

The sky is the limit really. When it comes down to it besides the actual guts of the "check_user_inc.asp" file ASPProtect is nothing but html tags and chunks of simple server side code that produce more html dynamically. What your browser ends up with is basic html. (some client side javascript in certain cases, but that is pretty basic stuff too.)

thanks!! the file took care of the extra slash. I also fixed the problem by modifying the permissions.

dazed

Christopher,

Thanks for the reply. I think I've found my problem, but can't test until later in the evening as it is on a live site.

Darrell

More Upgrade Info

To upgrade an existing ASPBanner system please follow these steps.

Back up your old system completely before starting.

Install the new system per the installation instructions that came with it.

Once it is running simply use your old ASPBanner database with the new system.

You may also want to keep your banner images folder from before in the same location so your existing banners still link to valid image urls because the new system stores banner images in a new location.

Since the config table in the database is no longer used you will need to go to the settings screen of aspbanner again and configure things. The config table in your old database can be deleted or left alone. It won't be used anymore so it does not matter either way.

That is all there is to it. If you have any issues please ask in the forums and we will help you out.

Still not ready... I have no time to finsih it at the moment..

release date is unknown...