For pay signups you set the groups during signup it like this thread tells you to

http://support.cjwsoft.com/code/moreinfo186-1.htm

only difference is you need to specify the groups info like so
(basically getting rid of the commas and just leaving behind the group numbers with a * around everything)

Also be sure to have no double asterisks

so, *1*,*2* would just be *1*2*

so, *1*,*2*,*5* would just be *1*2*5*

Christopher

Many Thanks

Seems like its working just got to test it bit to see, though it wasnt going to work as I had one too many End If's after the last part of the code you done for me. But even I eventually sussed it, nothing to do with your bit just another mistake on my part

Great to get support like this especially on a Saturday

regards

John

[QUOTE=cwilliams]actually, passwords can be up to 75 characters long in ASPProtect.
the only requirement when entered from a non admin user is that they are at least 4 characters long.

what does MSAccess have to do with this ? Are you trying to convert and old system or something? I noticed you created and "old password" field in there ? Is there something I do not know about as far as what you are trying to do?

Passwords in version 7 are encrypted so I hope you understand all of that and realize you can not enter or change passwords right from SQL server. Also if you import info you must handle that accordingly and convert the passwords to encrypted format. [/QUOTE]

First off, I haven't imported anything from MS Access.. The only reason I mentioned it is cuz I thought initially it worked with Access and not SQL server.

I am not converting nor entering any data manually into the db, nor have I changed anything in the way the registration is made (don't know where the "Old password" has come from? thought it was a function you made?)

Hi

I have purchased the Standard version about a week ago. Its a great script.

I have been able to select  uploaded banners from day one... but just now i dont seem to be able to select...

i know its hard for you to trouble shoot with such little information.. but i had to ask..

Should i maybe upload the site again ( but same the database first)?

regards

Domenic

Sydney, Australia

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
    Response.Write(Session("Groups"))
%>

It should be released sometime late May 2004 or early June 2004 but no gurantees as I am pretty busy right now with some projects.

There will be upgrade instructions and it should be a fairly easy upgrade.

sure and thats probably what you should do... that pure asp upload thing must not be able to handle the size of your import file... another thing which can very .. also some versions of IIS require registry changes to upload bigger files via asp code alone

The album ID thing is completely normal and by design. Once an ID in the database is used it can not be used again. That is how autonumber fields in a database work.

As far as not being able to delete images... Are you by chance using ASP.NET to show dynamic thumbnails... Because if you are you must turn that feature off and wait 20 minutes or so (maybe more) before you will be able to delete any of the images. It is because the current version of the ASP.NET script used to make the thumbnails locks the images on the server temporarily anytime it creates a thumbnail.

It is a known issue... and there is no fix at the moment other than what I told you above.

It's just a generic error that means one of 1000 different things is wrong.. there is a lot of information on in in these forums as well as links to articles about it.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=27& PN=1

usually it means permissions to the database folder are incorrect or the physical path you are specifying for your dsn-less connection is invalid..

everything has to be perfect

Hi,

I don't fully understand what you are explaining ... the part about showing a user but not working???? but if you PM me the details I will glady go into your live webserver and see if I can get it working.

The default database password is "temp"

This is noted in the docs. You can also see the current password by looking at your connection string.

can add photo album but after i upload a pic, nothing shows.

where do i look to research why pics aren't showing in the albums

ASPProtect v7 comes with working example code of protecting an image from being downloaded and also protects the true file location of the image on your server..

This comes with the system as an example folder with some files in it.

Basically we protect the image in 2 ways.

All in all this is should be very effective protection. Yes, there are still ways to get the images like doing screen captures, but this will ensure that people viewing images are logged in to your site. This will in most cases keep them from right clicking and saving the images. This will ensure that people can not tell other people the image's url location and it will ensure other sites can not leach your images and bandwidth.

For the image protection examples to work you may need to edit some values
in the stream_pic.asp file that are valid for your setup.

Look at the source. The values you can edit are commented.

Now, you also need to call a valid "image file name" from the call_pic.asp file which is an example of how you protect a page with javascript and call a streamed image using an image tag.

Lasty, here is a great article I found on image protection and some of the things you can do about it and some of things you cannot.

http://pubs.logicalexpressions.com/Pub0009/LPMArticle.asp?ID =41

check permissions for the user you are connecting to the SQL database.
http://support.cjwsoft.com/code/moreinfo122-1.htm

That user may not have permission to make new data

Also,  check all field and table settings manually by comparing them to the SQL creation script we provide. You may very well be missing auto increment and primary keys which would make adding new data not work.

It is most likely one of those two things.

The redirection at 1st login feature is supposed to work like I explain in this thread.

http://support.cjwsoft.com/code/moreinfo385-1.htm

Though what you just said is a bit confusing it sounds like you have some sort of browser problem and it is doing the redirect every single time. ?

I would suggest reseting all your browser settings to normal and making sure cookies are enabled because forms based authentication uses session variables and cookies must be enabled for session variables to work correctly. If not something like this could happen as the redirection at 1st login would happen over and over every time.

So try it on other computers and try with firefox as well as IE. Many people go nuts with their browser settings and way too much stuff blocked which can cuse all sorts of issues. Also some script blocking and firewall software can cause problems so disable all of that when testing.

You may also have created some sort of endless loop. (I really need to know way more information on what you did to know that for sure)

You may also want to consider doing your redirects manually meaning you protect a a page and right after the protection you use regular ASP redirect statements to redirect the user whevever you like based on their session info which is available to easily check immediatly after someone gets through the authentication.

I still stand behind my statements that redirection is not good site design. You really really need to understand and plan your ASP pages as well as have a very good understanding of the session and how all of that works if you use redirection with a password authentication scenario. You should never be redirecting someone to an ".htm" pages except during testing because you wont be able to stop users who are not supposed to go there from going there directly.

Good Evening,

I have been trying to log into my site using the protected pages comments you have in support. I have copied the code in the ASPprotect 7 guide.

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

and pasted it in my page, set the the IIS to open this page and the page will not open it and the page will not open and the error is

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file 'check_user_inc.asp' was not found.
/olem/reldt/introduction.asp, line 3

When I remove the two lines of code everything goes normally.

I have aspprotect in its own directory in the website. I have read the installation several times and I am afraid I am missing something blatently obvious so I really appreciate you thoughts.

I am presently using redirects. I like not haveing to use them as your comments have suggested. I have pulled all that code from the pages I desire to protect during this test.

I have three test users in my database - 1 administrator

Any suggestions?

Thanks and best regards

I think you may be using old code where that was an issue... I am going to PM you the latest version..

to be safe upgrade all the ASP files except the dataconn_inc.asp files and your config_inc.asp files

"be real careful not to lose your current encryption keys in the "config_inc.asp" file or you will be in real trouble

You can use your existing database

sure (XP PRO), see my article on that

http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

Access to some sections of the forums must be requested.
Please Click on the following link and read all of it carefully.

http://support.cjwsoft.com/

I encountered a problem that I haven't been able to solve. I'm trying to get .pdf files to byte serve (page-by-page load in the browser) but unable to do so. I've narrowed it down to stream download file where it creates the header object. I haven't made any success with the changes I've tried. Any help would be very nice.

This maybe useful:
http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/act/htm/actml_ref_href.asp

We are emailing a weekly newsletter via the Newsletter feature.  Many clients complain that they are not receiving the newsletter.  The emails are not bouncing back indicating that they possibly are not being sent to begin with. 

Is there any way we can determine if ASP is making it through the entire database of subscribers?

Our login works great, variables even help determine menu options.  When user logs on, however, it opens in a new page.  Is there a setting somewhere that sets whether you can open in a new or existing page?

Also, when you log off

it might also be a good idea for you to try a simple text file writing example like this on your server and see if it hangs as well

http://www.devasp.com/samples/writetofile.asp

for troubleshooting sake

this is sounding more and more like the filesystem object is blocked or disabled on your server

Humm.. that should have worked fine

why are you getting a "OLE DB" error I wonder ?

I need more information. 

Database being used and version ?
Server OS Version?
Connection String being used ?

etc etc

Some of our users complained that their users id and passwords are sent in the clear. So we decided to invest in an SSL certificate from Verisign. It has been tested fine with all forms and pages in ASPProtect version 6. The only remaining page which I am not sure how to protect is the home page. Let's say my home page is http://www.MyDomain.com/index.asp. When the user goes to this link he/she will be presented with the check_user_inc.asp page so he/she can enter their ID and PW. So how to make the login information send from this page thru HTTPS?

I noticed that is grabbing the wrong URL for some reason. Even when i mouse over the URL its somehow getting the users sub directory. How.. i dont know... when i erase that users in the url it works perfectly.

I am looking at the code in the .vb file and i dont see anything that could be causing it to do that... but then again i am no programmer LOL

Its obviously kicking in that users subdirectory somehow... what are your thoughts?

Hi,

I don't see any good reason to rename any of those files.

Changing them though may involve changes to the code recompiling, etc etc... it is not something I support.

I am attempting to have the page dedirect from the group, as some of my users are part of different and multiple groups (they are not structured in access levels, b/c they cannot be part of multiple levels(?)).  So I think I need to redirect by group.  I am having trouble having this work correctly.

-j

LOL

OK, well, that error is pretty self explanatory really. There isn't anything else it could mean.

What you showed me in that screen shot all looked correct, but still permissions to that file just can't be correct. The paths are correct. The path to the file looks correct. The ASPNET (ASP.NET) account looks correct.

I would try settings permissions directly on that XML file. Perhaps child permissions did not go through the way you intended. (the advanced tab must be used for that) If that doesn't work try giving ASPNET and Everyone full permissions on the file directly.

Possibly check the paths in the web.config file just for the heck of it.

Last case scenario, you can edit that XML file directly instead of using the screens in the application. Of course if that file does not have correct permission chances are other things like log files will give you issues as well.

That is all I can think of right now.

Is there a simple way to upgrade from 7.x Lite to 7.x Full?  I was testing out the software and I just purchased it.  I have made some look and feel changes to the lite version (ie: login page), but no look and feel changes to the admin section.  Is there certian files that I can add to have the full version without shorting myself features or functionalbity? 

Thanks

I am using cdont to send email. what do i have to do send email to other display my full name instead  of email address. In other word I want to see first name last name  in their email client instead of email address.

thanks for your help