no, you cannot unless you plan to write a lot of custom code.

That is why the option pack has groups which eliminate the need to use access levels because groups can do everything access levels can and more.

There is an article here regarding that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=32& PN=1

I just purchased the software and it looks great however, I have been fighting for 4 hours trying to get a protected page to do what it is supposed to.

I was trying the examples you provided and they worked fine, then I would use the code at the top of my pages with no luck.

When I installed the software, I used an FTP package as I have found lately that anything with a database gets all messed up when I publish with FP.

On a whim, I took the page I was publishing in FP and published the same page with my FTP program.  It worked!  What I can't figure out is what FP does to the files to screw them up so they won't function.  Is there a setting in FP that I have to change to get it to work?  The files look the same, but they are different sizes when I overwrite them with FTP.

Any ideas?  I don't want to have to publish my entire site with FTP as it is a FP template site.

Thanks,

Dave

if you use either of those options the mail server info you use must of course be valid (example: mail.somesite.com) your host can provide that info

you should also make sure your sending the emails using an account at your email server.. not some other email you have


other than that if it does not send emails it could be because your hosting company may require authentication for outgoing emails...

ask them ...

if that is the case the version of ASPBanner you have does not support sending email that way and you would need to add the necessary code to any places that send email... in order for emailing to work

I assume you mean 500 pixels wide

no.. because you cant reliably tell a pictures image width without an image resizing component to look it up.. asp can not do things like that on its own

serverobjects has a free component called "imagesize" that can do it as well but you need access to the server to install the component
http://www.serverobjects.com/products.htm

so if you cant do that with regular asp code you definetly can not stop the upload proces because the picture is too wide..

heck, that would be nearly imposible to do regardless.. even with the best 3rd party components at your disposal

even with an image resizing component you would have to allow the upload.. then check the pixel width.. then delete it.. tell the user what is going on...etc etc  .. all a very complicated process

The redirection feature isn't working as I exected.

If I clear a user's redirection_URL, they can navigate to any protected page on my website as expected.

However, if I set the user's redirection_URL to a protected page, they cannot login. More specifically, their browser just keeps displaying the login form while the browser's progress bar just increments ad infinitum.

If I set the user's redirection_URL to a NON-protected page, the user is directed to that non-protected page, but if they then try to navigate to a protected page, they are redirected back to the redirection_URL.

Is this the way the redirection feature is supposed to work?

My application requires that a user is directed to a protected page and from there, they can navigate to any page that they are allowed to go to.

What can I do?

Yes, you are right.

We have now tested it using the DSN less connection with Access 2002 and it works fine. We have also tested it again with a DSN using 2002 and this also seems to work.

The comment about speed is a consideration although I have not noticed any differences. ( we only have a few database entries at this time).

Thanks for your help

I just added this line to the paypal1.asp page

<input type="hidden" name="currency_code" value="CAD">

and it worked.  Clearly other values can be entered for other currencies.  Everything was listed in this manual https://www.paypal.com/en_US/pdf/subscriptions.pdf.

Cheers
Roy

Not sure because of the nature of the javascript method

for starters tighten up the html around the banner call

change

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<!------- ASPBanner Ad code ------------->
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >

</td>

to

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >
</td>

If that doesn't help I would suggest using the ASP 3.0 version of ASPBanner. It can serve banners to a any type of page extension and it runs just as well as the .NET version. There is a new iframe method for calling banners that you can try instead of the javascript. The iframe method is explained in the ASPBanner Unlimited section of the forum.

Just wanted to say how much I like the program! I hunted for days and finally purchased a Perl based product. After several days of goofing with it I gave up. ASPPhoto worked right on first install!!!!

Way to go!

Chris,

When I set up a test user name it does accept name and passwords and the passwords are encrypted, no problem there.

All I want to do is to restrict access to the protected pages to the members only. Only those users will be accepted and allowed to view.

I have entered all of thier names, address, phone number, email and company in the database, which is still named ASPProtect_access2002.mdb and in the fpdb directory of wwwroot. To get it there I uploaded via FTP.  I hope I expained the situation well enough.

(Indemnification Agreement Mod)

This very simple mod will add an Indemnification Agreement Pop-up to the registration signup form which must be agreed to before continuing. This is often done for legal reasons to help cover yourself if something should come up later on.



Instructions:

Download 2006-03-19_212700_Indemnification_Agreement_Mod.zip which contains "terms.js" and put it in your scripts folder. It contains the text that will be displayed in the pop-up. You can of course carefully edit it with a text editor to say whatever you like.

Now carefully edit "users/register.asp" with a text editor. Add this bit of code in blue right after the include to the "footer_inc.asp" file like so. It will be near the bottom of the page.


<!--#INCLUDE FILE="footer_inc.asp"-->

<% If ErrorMessage = "" Then %>
<script language="JavaScript" src="../scripts/terms.js">
</script>
<% End If %>

Your done, that's it. Now when "users/register.asp" is run for the 1st time the pop-up will come up.

Good Evening,

I have been trying to log into my site using the protected pages comments you have in support. I have copied the code in the ASPprotect 7 guide.

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

and pasted it in my page, set the the IIS to open this page and the page will not open it and the page will not open and the error is

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file 'check_user_inc.asp' was not found.
/olem/reldt/introduction.asp, line 3

When I remove the two lines of code everything goes normally.

I have aspprotect in its own directory in the website. I have read the installation several times and I am afraid I am missing something blatently obvious so I really appreciate you thoughts.

I am presently using redirects. I like not haveing to use them as your comments have suggested. I have pulled all that code from the pages I desire to protect during this test.

I have three test users in my database - 1 administrator

Any suggestions?

Thanks and best regards

also.. the log out page shouldnt really need this
but you can try adding this to it where all the other ones are set to nothing..

<% Session("Groups") = "" %>

SQL Server Datareader Datawriter Permissions..

here is a screenshot that shows how to set datareader and datawriter permissions on a database using "SQL Enterprise Manager"

In this example we are making sure the aspbanneruser has those permissions on the aspbanner database in the SQL Server

Wondering what might be causing a long delay to display the login screen?  This does seem to be intermittent.  Could be server/ISP related? Have experienced enough times to justify posting this question.

I can count up to 20 seconds after clicking on the link.  After login all other selections zip right along without problem.

http://gibsoncity.us/aspbanner/

Thanks, Lance

The login page sends the user to redirect.asp (which is as follows)

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
If InStr(Session("Groups"),"*1*") Then
    Response.Redirect("gp01.asp")
End If
%>

<%
If InStr(Session("Groups"),"*2*") Then
    Response.Redirect("gp02.asp")
End If
%>

I am not being redirected to gp02.asp if I am a member of group2.  Also, we wish users who are part of group 2 and 3 to go to a different page (ie. gp2-3.asp)

Thanks in advance.

I have connected to countless DB's using my own applications written in dreamweaver and have tested them on my own server and also my web facing one.  BUT this seems to be different.  no matter what I try I still get this error.

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x440 Thread 0x6b0 DBC 0x1f995bc Jet'.

On both a windows 2000 server and also a windows 2003 server. Also using both DSN and DSN less connection and oledb.

Any help would be greatly apprectiated.

Thanks

If you still cant see the upload buttons after checking the settings send me a PM with the info and I will take a look at your installation. It will have to be up on a live server of course.

Yes worked fine

thanks

The version of aspbanner you have should not matter.

What you are doing here is wrong.

<PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">

PARAM NAME=movie is supposed to link to your ".swf" file.
And thats why all you see is black.

I don't think you quite understood all of that information fully.

Your ".swf" files needs to be coded in FLASH to link to the aspbanner redirect url. You don't change that flash calling code like that.

The ".swf" file links to the aspbanner redirect url which tracks the click and then redirects the user to the Link URL

You basically need to code your ".swf" flash file to go to that aspbanner URL or code your flash file so it can take a parameter for the url it clicks to (like the macromedia article talks about. This has to be done when editing the flash file in the flash editor before the file is saved.

If you dont have access to the original ".swf" to edit it and re-save it.. your out of luck as far as tracking clicks goes

Can ASPClassifieds display the ads by city?

I have a web directory that lists websites and companies by city.  Is it possible to have specific ads shown to the user depending on what city they click on?  For example, only ads in New York would be shown to users that have already clicked on that city in my directory.

thanks,

Here is what I have in settings.

ServerSoftware	Microsoft-IIS/6.0
ServerName	www.107threnegades.com
ServerProtocol	HTTP/1.1
PathInfo	/gallery/gallery_admin
PathTranslated	d:\hosting\arisky1\gallery\gallery_admin
FILE SYSTEM OBJECT	Installed
ADODB (ActiveX Data Object)	Version: 1.2 Installed
CDONTS	Version: 2.80 Installed
SMTPMail	Not Installed
JMail	Not Installed
AspEmail	Not Installed
AspMail	Not Installed
SAFILEUP	Not Installed
Dundas Upload	Not Installed
ASPImage	Not Installed
AspJpeg	Version: 1.4.0.1 Installed
ImgWriter	Not Installed
Script Engine
Type	VBScript
Version	5.6
Build	8515

I do not even see ASPUpload listed but when I run the test_asp_components.asp from the extras/more_component_info folder, it shows that it is installed.

67	Upload	Installed	COM Details	Persits - ASPUpload
68	Image	Installed	COM Details	Persits - AspJpeg

It's not normal at all. My guess you accidently edited the code in a bad way.

(thats the same code the every guestbook in every application I sell uses including ASPGuest which gets downloaded for free about 50 times a day)

No one has ever said it acted funny.

I would do a default installation with the original code somewhere and see if the problem occurs. If it does I can take a look.

In the meantime I wouldn't be running that as it is probably using up massive processor time because of whatever is wrong with it. 

Regarding (ASP Photo Gallery Pro)

If you are looking to import a very, very, large number of images, the upload feature might not be sufficient for you. I have done some work using a unix terminal to be able to upload as many images as I would like by simply placing the images in the directory and renaming the images. There are other ways to rename the images, but I am very familiar with Linux, so I chose to do it this way. If you are running Linux, MacOS, or another Linux-based OS, you can simply pull up a terminal and run the following command in the appropriate directory. If you run Windows, I'd suggest CygWin, which creates a Linuxenvironment (Linux shell). It can be found at www.cygwin.com In order to be recognized by the ASP software, the images must be in the format of pic_"Album Number"_"Picture Number".jpg . Therefore, the following code is run to accomplish the file name change (on one line without wordwrap):

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}'
This command will change all files beginning in "DSCN" to "pic_9_*Picture Number*".

This does have a slight problem however. If there is a large number of pictures, 0's become a problem. For example, if there are 200 pictures, picture 1 will show up as pic_9_001.jpg. This can be fixed by the following command, which will eliminate unneccesary 0's (All on one line once more):

ls -1 --color='never' pic_9_0*
|sed 's/_0/_/g'
|sed 's/pic_9_//g'
|sed 's/.jpg//g'
|awk '{print "mv pic_9_0"$1".JPG pic_9_"$1".JPG"}'

This command eliminates 1 zero. It should be run as many times as needed to eliminate all zero's.

Please Note: These commands will only show the resultant set (The list of picture names). In order to execute them, they must be output to a shell script using the ">" character as follows:

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}' > temp.sh

Then, the shell script must be run using the following command:

sh temp.sh

This might take a few moments, depending on the amount of picture names that are being changed.

IMPORTANT: BACK UP all files before changing file names. Also, view the resultant sets to make sure it's what you want before outputting to a shell script.

If you have any questions, please feel free to post or e-mail me @ JPortnoy@checkernet.com

The "forgot your password" feature is not sending passwords to users when they put in their emails.

Any suggestions?

Thanks

Well, I assumed I'd be able to tweak this thing but it is all so intertwined it doesn't pay to mess with any of the files. Hence, I'm going to have buy a different system only a week or two after buying the unlimited version here.

As I leave I want to give you some impressions here. While the system is low-cost, the 99 dollar version is missing a few pieces that I think would bring the value to 99. It is one thing to talk about the speed/performance, but to a degree that's hard to measure, and to anyone with web advertising on their site, performance will always run second to potential site income.

It definitely needs a user interface and registration for advertisers, and it definitely needs a single variables file for changing the hundreds of variables for which there is no control. I had to search on my own just to change the look and feel.

Lack of multi-zone support is a serious drawback. I would submit that anyone with a serious website needs it, and will gladly pay you 139 over 99 for just that one feature.

Take them or leave them, they are just suggestions.

I have been using this solution for over a year now and think its great, however I recently logged on to add a banner and when I clciked on the link that opens a window, displaying all the gifs in the directory../images/banners/, now images showed up, however they do exist in that directory.

I recently upgraded my computer and am now using windows XP...could that be the problem?

Thanks

Your SQL statement to the database is the key.

You want to change the sortby hyperlink on that page so that it will in turn change the dynamic sql statement to sort the way you want

Find

?SORTBY=Date_Created

change it to

?SORTBY=Date_Created+ASC

or maybe

?SORTBY=Date_Created+DESC

One of them is the default anyway, but I cant remember which is which off hand so just try them both till you get the desired result

near the top you can also change the default sortby when thet page is loaded

SORTBY = Request("SORTBY")
If SORTBY = "" Then
 SORTBY = "Name"
End If

there you would use a space though.. not a "+" sign when adding the ASC or DESC

The + sign is only used in the hyperlinks because it means a space for browsers that can't deal with spaces in links

Chris -

Long time no talk, which is a good thing.  I have purchased another product from you, ASPVendor.  I am running into an issues.

When I try and remove the image through the image manager, it does not remove it.  Screen shot attached.

2005-10-19_194248_image_upload.zip

Thanks

I did all that you sugessted and all failed, you  said "I did a sign up.. your verify URL is not saved/set in the application variables. is this somthing I can change manually?  below are the steps I performed......

1 - made sure the web is it's own application in IIS

2 - Reset IIS in command promt

3 - Restarted the server, the only thing is I have not waited perhaps long enough for it to kick in. but it should have with the restart.

I am running windows 2003 on the front end with wondows 2003 and Exchange 2003 on the back end, is there anything else that may be causing this issure?

Thank you!

Matt...

Well Chris:

I logged off too soon after your last response. Your last idea was the answer. I am running McAfee as my virus-scanner on the mail server I am running. There was a script inhibitor enabled as a worm detection function. When I disabled it, your software responded correctly. I guess I can do without that, although with everything thrown at the net these days, it makes me a little nervous.

Thanks