You can also try setting asphttp's user agent property to some browser version like in this example. It might stop that info from showing up when it fetches a page from the server.

<%
Dim BanObj1Http
Set BanObj1Http = Server.CreateObject("AspHTTP.Conn")
BanObj1Http.UserAgent = "Mozilla Compatible (MS IE 3.01 WinNT)"
BanObj1Http.Url = " http://banserver.powerasp.com/aspbanner/aspbanner_inc.asp?Ba nnerZone=1"
Response.Write BanObj1Http.GetURL
set BanObj1Http = nothing
%>

Also... I dont know if these values below will work but I got them from looking at my nt logs.

Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)

Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0)

And here is more info on the asphttp component and it's settings.
http://www.serverobjects.com/comp/asphttp3.htm

You should read my article on server side includes… the path to the include file must of course be adjusted depending on where in your web you are.
http://www.powerasp.com/content/code-snippets/includes.asp

You will also notice if you look at the provided example pages that the include paths have been adjusted to make sense.

If it is 2 directories down it should probably look different..

example:)   "../../checkuser_inc.asp"

It’s weird that if you are not getting an error because if the path to the server side include is wrong you should get a nasty server error.

Also..

The ASPProtect system and any pages it protects must also be part of the same Application in IIS. It’s the nature of forms based authentication. Do a google search if you are not sure what an application is in IIS.

Lasty…. If you are logged in at the time

Whether your current session at the site is still active… or you have the cookie set to remember you.

Well, nothing will happen… cause your already logged in and you will just see the page as normal.

Perhaps things are working and you just don’t understand that part ?

You need to go to the log off page.. log off… then close all instances of the web browser windows..

Then come back to the site… then see if it prompts you to log in.

Hi,

Could you please advise what may be causing this error:

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x57a4 Thread 0x5474 DBC 0xf03a704 Jet'.

/ASPProtect/check_user_inc.asp, line 292

Funny thing is that if I refesh the page with the above error it gives me the following eror:

/ASPProtect/check_user_inc.asp, line 292

and after few times of refreshing the page it shows me the page I am after.

Is this my promlem or ISP's.

Thank you

Your going to have a lot of problems and a lot of the code will have to be re-written.

There are a lot of things in the the code that the MYSQL database system does not support or has issues with . I know because I once made a version of ASPBanner work with MYSQL and it took weeks of work to get it stable.

Null field types can cause problems... but mostly ADO updates which I don't think MYSQL supports at all. All of the ADO stuff would have have to be rewritten.. etc etc

That's probably why you cant get much of the code to write to the database.


Here is a generic example.

An update to an existing record using ADO
http://www.powerasp.com/content/database/ado_update.asp

And update to an existing record using an update query.
http://www.powerasp.com/content/database/using_update.asp

All through the the code the ADO updates would have to converted to update queries which means a lot of work.

I used ADO a lot because I like it and it is little easier to validate data before it is written to the database.

It is also a little easier for customers to understand when they look at the code.

Anyway....

The app just was not designed to work with MYSQL.
It was specifically designed to work with MSSQL and MSACCESS only.

This holds true for all of our applications.

Your running off an IIS 5 Server so I would suggest just using MSACCESS as the database. The Photo Gallery app will run very well using MSACCESS. 

I did try to redit the banner and the old link was there, not the new one.  In addition I tried to ad a new banner to an account but it too was not saved.

Since I can see the banners from the aspbanner solution, does that not tell me that the solution is properly connected to the database?  The only thing is the solution only appears to be able to read the data and not write or delete it.

The settings for the directory are read write execute and delete so I am not sure what I need to do to get it working again

New Power Supply and a new (CPU Fan/Heat Sink) seemed to do the the trick. She's running like a champ now...

Hopefully it keeps doing so. Only time will tell.

It she's stable I can get back to designing some new software.

The only reason no one else asked this many questions is possibly because they didnt NEED the functions i am TRYING to do.

We offer tech support for installation of the base application purchased in it's native form.  In other words were not planning on spending weeks holding your hand and teaching you how to build your application or modify the one you bought. Not because anyone wants to make it hard on you but because there is a practically infinite number of things someone could be trying to do and the only way to give you the exact answer would pretty much involve either writing it for you or having a look at your code to see what the heck your doing. Sorry but my time isn’t cheap nor do I have a lot to spare. I already gave you my approach on what to do and what you should be looking at but obviously you’re not catching on. SO ONCE AGAIN, PLEASE LOOK AT THE SOURCE CODE AND DECIDE HOW YOU WANT TO HANDLE YOUR END OF THINGS BASED ON HOW THE APP DOES ITS THING. I really don’t know how I can be more clear that that. I don’t have a crystal ball that can tell me where you’re going with your own code, what the final requirements are... what field you want to add or remove for the database etc. There is a demo up that everyone can look at and play with so they can get a feel for how the things behave and look. It’s not my fault your naivety led you to believe you could do anything with it in ten seconds. I mean if I just add some wings to my car maybe it will fly, and if you just add a shopping cart and a few products maybe you can start your own Amazon.com with that software right? Sounds good to me…

It would take me longer to re-write YOUR code than it would to have LEARNED ASP.NET and made MY OWN.

Well thats one thing we both agree on, I bet it would take you a long time to rewrite the code when you dont know how to write it in the first place. By you own admission you dont know enough about what your doing to be messing with a .NET app at this point. Maybe you should take your own advice and LEARN SOMETHING ABOUT IT. What’s even worse is that application isnt even complicated, its 101 stuff honestly. One class, thats it! Your not looking at thousands and thousands of them that you will have to read and comprehend. If you can actually “read” the code we kept it lean and mean and to the point. Nothing strange or random, no references to a zillion things all sprinkled here and there. Its reads like a book if you know the language. That’s why developers buy these apps all the time. Not because they couldn’t write one themselves, but because they know their time is valuable as well and for $150 which is less than most get paid an hour they couldn’t be bothered. Furthermore we both spend a lot of time making sure these apps are "dumbed down" so that the average programmer without a lot of object oriented background can pick up the coding style tweak it if they need to. Some people do modify things to suite their needs and others are happy with our apps "as is".

Just to recap we already wasted two days yappin about your jacked up servers and after you went through THREE of them and finally got one working you said the code was working. Red lights started flashing in my office by the time you got to the second screwed up machine, but hey weird things happen so at that point I wasn’t 100% concerned. Technically we could have and possible should have cut you off there as the policy in place is pretty clear about us not being your tech support crew when it comes to getting your machine working properly (especially one we cant even look at). Go check those posts again both Chris and I were answering your questions and being as helpful as anyone could possibly expect.

Several more days have been spent answering questions about how to modify your application and again that’s not our responsibility and we don’t support modified versions of the software for all the reasons that should be obvious. No software company does and if I have to explain why that is well this conversation is beyond hope.

Bottom line is the responsibility to support that application ends the moment you get it running the way it was shipped. Were pretty damn decent about going above and beyond and a lot of the time we go into things we shouldn’t have to. If you have well thought out and specific questions by all means ask, this isn’t some sort of thanks for your money now get lost operation. CJWSoft has been around since the beginning of Microsoft’s entrance into the web application market. We have thousands and thousands of happy customers because we are developers and enjoy working with other developers along the way.

You’re not the first N0oB to show up, but you’re the first one I can think of that ever tried to tell us we didn’t write the apps we sell and essentially wanted to argue that we don’t know what were talking about. Meanwhile you should have been done with your thing days and days and days ago, not in here yapping off and showing your ignorance to the other developers that regularly browse these forums. You trying to tell me how CafePress works is a joke, I happened to have been part of the team that worked on the first few revisions of that site and again you really didn’t even understand what I was getting at in that last post. LINK TO LOGIN PAGE not link to every protected page on the site.

If you think I am pissed off at you, your wrong. I'm just irritated with the whining about this and that and rather than admit your over your head you come back with half baked remarks that only make sense to you. If you think you can google a few terms and come back here talking smack like you’re actually someone that knows what you’re talking about your just making a fool of yourself. You sound like a guy from China trying to tell me how to speak English... My advice is get a few books and start learning or try actually reading up and listening to the other bazillion knowledgeable developers out there that do a great job posting articles about the subject. You might just learn something and actually get your project finished before 2010 and when you do please come back and re-read your posts with "enlightened eyes" so you can see what a goofball you are for saying half of the things you have said. I am not in the mood to keep helping you get your project done step by step. I have huge projects of my own going on and if I thought you could actually provide a descent project specification I might offer to make the changes for you at a serious discount so you could go away and everyone would be happy. Problem is I dont get the feeling you could explain your way out of a paper bag let alone provide a group of programmer the techinal specs for your project.

Your best bet is to post a link to the start of this thread at www.AngryCoder.com I'm sure a  few of  people over there would be more than willing to give you a ton of usefull advice

Google 4GuysFromRolla… a great resource site with example, just dont come back here  telling me those guys/ladies posted things that dont work either.

Chris has written hundreds of articles on PowerASP, a great place to start looking as well… www.powerasp.com I've been spitting out code for longer than I can remeber and I still look thing up on this site because its LOADED with great info. That happens to be one of the very first ASP sites that went up on the net so lets just say he knows a bit or two about the subject.

I'm sure your frusturated but your pushing your luck seriously. 38 posts about this subject in a week and your over there hacking away on your virus infested WaReZ machine which isnt exactally the ideal development rig. I mean we provide the code and your supposed to provide at the least a very basic knowlege of what your doing and a production grade platform to test it out on. To me thats like buying a car and then asking how to drive it... then bugging the dealer to teach you and when you smash the thing complaining because no one told you that your not supposed to drive into a wall. I have the same policy as the dealer, show me something wrong with the car from the factory and we will fix it for you NO QUESTIONS at all with our appoligies, but really once you take it off the lot what you do with it is your deal and its not our responsability in the least.

Yes worked fine

thanks

After I approve someone's username and password, then go to send them the default e mail telling them of the approval, the e mail never goes through.  The e mailing used to work well for many months, but it stopped working.  Any thoughts?

Spider

I am converting the email over from CDONTS to CDO so it will run on my host 2003 server.

What files should I be concerned with?  Under gallery_admin there is an email_user.asp and  under the main gallery folder thier is an email friend. Is there an other email routines I should be concerned with?

Thank You for your Assistance.

Jeromy

How can i get to this to register someone in the database only after the Paypal payment has been accepted.  I was testing it out to see if it makes it to my Paypal account (which it did just fine) then I closed Paypal before paying.  I logged in as the administrator and looked at the member list and the account was created anyway.  How can I stop this from being created until "only" after the Paypal payment has been "approved"?

What if this person never comes back to "try again"? Now the username he used (and is inactive) is not available for anyone else to use.  And it takes up database space.

I am using the Paypal (non-subscription)

Thanks in advance,
scottyFlasher

someone has to do something other than me.. i've given up

if i give u the username/pw can you set this up on the network solutions host and ask them to set whatever permissions are needed?

cant do it anymore....

Thanks.

clark

When I add a user, I can not activat it.

What do you have the registration type set to in the settings ?
They wont be activated automatically unless you have "automatically" selected ?

It sends me back to log on and will now allow me to log in as admin???

I am not quite sure I understand ? Seems to me like that would be normal because you can always log in as the admin at any time. If you cant log in as the user you just signed up as that could be for a couple reasons relating to the registration type you have slected in the settings. There are 3 types all epxlained in the settings screen. Some require manual activation byt the admin, some involve a registration email.. etc etc

I can restart the APP and log in as Admin, but the user I added
is still not activated??

How and why are you restarting the applicaton ? Please explain what your doing there.

My system will also not allow me to set the Stay Loged in FLag.
It just ignores it....

As I told you in an email earlier cookies must be enabled for authentication to work. You mentioned now you can not log off ? I am not sure I know what you mean by that. I assume you know to close all browser windows when testing things like this and I assume you know you have specifically log off and confim it in order to remove the remember me cookie and have to log in again when you return to the site.

Sorry you feel that way, not my intention. I'm not threatening anything. I was very happy you responded when did so there no reason for any bad feelings. I like your product as I said before and have no problems with it. Sorry again, that was not my intention. Merry Christmas…

I think its great to share a mod.

I will have  few with the new album.

ummm.. ok.. Then this doesnt make sense.  On two out of the three machines I have in house here, the images do not show up.  They only show up on the server machine.  I am using the constant url on all three machines.  www.rfamilystuff.com  Does it show up on your?

how you connecting... lets see the connection string...

could be permissions related too.. if they are not set correctly
(always give them to the folder, never just the mdb file)

Some of this might help...

http://support.cjwsoft.com/code/moreinfo11-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

you may want to download some of the different versions of the access database from the support area and try connecting to them as you may have older odbc drivers on the server

You may also want to try to get ASPTest from our website working before you go any further

as I look at your installation more I notice that you are using MSSQl as the database type.

chances are that is the source of these problems. Fields in the sql database are most likely not all set correctly

it is very important that the sql tables and fields are set up exactly as described and that the sql script we provide runs without error

http://support.cjwsoft.com/code/moreinfo160-1.htm

if you create the sql database other than the way we tell you to or the sql script doesn't do its job setting all the field types/constraints/primary keys/etc..... for some reason .. then weird things like this can happen

at this time this is my best guess as to what is going on

I would examing the sql script we provide and compare the information set in it for each field and table to your existing SQL database to see if everything got set correctly.. I would start by checking these fields 1st of all as they are very important.... (username,password,expiration_date,admin,active)

in the meantime testing the ASPProtect system with an Access database will prove that all the ASP code is working as it is supposed to if you are interested in doing that

I have been using this solution for over a year now and think its great, however I recently logged on to add a banner and when I clciked on the link that opens a window, displaying all the gifs in the directory../images/banners/, now images showed up, however they do exist in that directory.

I recently upgraded my computer and am now using windows XP...could that be the problem?

Thanks

The setting I am most interested in is what you have for the "Pic_Max_Image_Width" used when the image resizing components resize the big image

setting it to nothing or zero could cause this

Hi Chris,

The password is HANNAH.  If you're into trouble shooting mode and would like the key, I can send it to you.  If not, no big deal, I've email the guy a new password.  We'll see how many rounds it takes him to get it right. 

Thanks,
Mick

Weird things happening, when I upload using the vb method the image fails and error is that the image was empty.

Utilizing ASPUpload and after clicking upload file I get a blank screen, no preview, no nothing (it loads with the proper header/footer) but a completely blank body.

Any hints?

The Double DIM needs to be removed for this code to work properly.

<%
Dim BannerZone, BannerConnectionString, BannerDatabaseType, ConnBannerSystem
Dim CmdCheckUser, CmdGetConfiguration, App_Name, Config_SQL, BodyTag, BanDataConn
Dim CmdBannerTemp, CmdGetZones, ZoneString, ZoneArray, ZoneIndex, CmdUpdateWaiting
Dim CmdUpdateExpired, CmdRetrieveImpLimitedAds, CmdRetrieveImpressions
Dim CmdUpdateImpHit, CmdRetrieveAds, CycleBannerTotal, CycleList, NewCycleList
Dim Dim LoopBanner, CycleLoop, CycleListArray, CycleListArrayIndex, BannerCycleData
Dim Banner_Array, CurrentBanner, NewCycleListArray, Banner_Array2, LocationIndex
Dim Stop_Processing, Keep_Processing, CmdUpdateStats
%>

I think I've got it to work somewhat.  I modified the 2checkout1 & 2 asp file to use and pass Product_id.  It now identifies the product correctly.  I'm good fo now. Thanks for the info though.

-Jason