I have seen that happen before though it usually just happens once and then after that it doesn;t show up. It's the asphttp component doing it. The ASPBanner system is not doing it. I would try using banner calling method such as the xml parser method. It's usually installed by default on 200 and 2003 servers.

All this being said installing the desktop version of SQL may be a little tricky as it may complain that your SA account needs a strict password.

The solution is to run the SQL Desktop setup.exe with some parameters specifying a password for the SA account.

So you go to the command prompt or make a shortcut to the setup file and run something like this

setup.exe SAPWD="YourPassword"

minus the quotes...

I got that info from this article and it worked fine
http://www.experts-exchange.com/Databases/Q_21036508.html

The other thing to remember is it might take a reboot to actually see the SQL server icon running in the taskbar. You may also need to go into the administrative services and enable the "SQLSERVERAGENT" as well as set its startup type to "automatic"

And a reboot here and there..

Whammo... your in business...

Yup, it probably means the virtual directory is not configured as an Application in IIS.

You did put this in a plain folder in your web, correcct ?
Not a subweb

Regarding the application settings for the virtual directory.. if it is your server you set that stuff up in the IIS console.

If hosted somewhere it is there responsibility to have that set up correctly for you and you need to contact them and ask them what the deal is.

ok.. so we got an NT server with a 486 with 256 meg of ram. 

hehe  sorry

anyway.. I have the system running without doing any importing and WOW is it chugging.. I mean it takes a while even to edit/save a user

good news is the filesystem object works as I wrote to a text file

this may end up being a simple case of lack of horsepower..

we may need to do the importing on a faster system and then take the database over cause everthing I see on your server looks correct

even so aspprotect is running so slow.. I have never seen it chug like this

I even tried connecting to a 2000 version of the database and no difference.

I am not totally sure what is going on but the server resources available are scaring me... however this could be something new in the code that I never got a chance to try on NT server.. I dont think so though

how does your other stuff run ?

static pages that do not access a database seem to serve up quickly.

are you running any other dynamic code ?

Does ASPprotect support Paypal's Website Payments Pro option, where a user can use a credit card directly on a web site, without passing to paypal.com?

Nick

Protecting ASP Pages

To protect a page without using the Access_Level or Groups feature simply add this code to the top of that page.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in.

An example of doing this is provided in the "default.asp" file included in the root of the Password System.
Look at the source code with a text editor to see the working code. It is quite simple.

 Protecting ASP Pages Using Access Levels

To protect a page using the Access Level feature simply add this code to the top of that page.
You simply specify the Access Level before the include file is called. In this example we are protecting the page with Access Level 4.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in as a Level 4 user.

Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System.
Look at the source code of the ASP pages in that folder with a text editor to see the working code. Again, It is quite simple to follow.

Protecting ASP Pages Using Groups

Please see the code generators in the admin are for the code to do that.

I had not rebooted after installing the Jet driver updates, so I tried that and the asptest page worked fine, and said that all the tests were successful and that the data connection was setup correctly. I then installed aspprotect again, but with the same results. I cannot log-in from the get_me_in.asp page. It still says that it is opening the page, but does not respons for an indefinite period. The asptest page is in the same directory.

I have looked for alternate databases for this product on your site, but I cannot seem to find them.

check permissions for the user you are connecting to the SQL database.
http://support.cjwsoft.com/code/moreinfo122-1.htm

That user may not have permission to make new data

Also,  check all field and table settings manually by comparing them to the SQL creation script we provide. You may very well be missing auto increment and primary keys which would make adding new data not work.

It is most likely one of those two things.

Thank you for the response to my question. In the mean time if I can figure any workaround I will post it here.

Chris: You are right about a little extra coding to make it work. I am still learning .ASP coding, so I did a little web searching and used IF THEN statments to confirm a member logged in with a valid Access Code. If valid, the protected page executes, with the Member's Name and Access Level on a single line at the top of that page. Looks sharp! If not logged in, or a non member (who found the page via Google), I used a Redirect to send s/he to a login page with optional links as you suggested (http://www.vspa.com/aspprotect/vspa-password-failed.asp) . I couldn't get it to work when using Group Access, but I am sure that is just because I am a novice at .ASP (I will post that example when I figure it out). Meanwhile, here's the code I used that works:

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="dataconn_inc.asp"-->
<!--#INCLUDE FILE="check_user_inc.asp"-->
<!--#INCLUDE FILE="config_inc.asp"-->
<% =Session("First_Name") %>&nbsp;<% =Session("Last_Name") %>:
<%
If Session("Access_Level") = "6"  Then
    Response.Write "VSPA Active Member Access Level 6"
 End If
If Session("Access_Level") = "7" Then
    Response.Write "VSPA Life Member Access Level 7"
 End If
If Session("Access_Level") = "8" Then
    Response.Write "VSPA Officer/Staff Access Level 8"
 End If
If Session("Access_Level") < "6" Then
    Response.Write "Access Level 1-6 NOT AUTHORIZED RESTRICTED AREA ACCESS"
    Response.Redirect("vspa-password-failed.asp")
End If
%><!-- http://www.vspa.com/aspprotect/vspa-password-enter.asp -->
<!-- *** End ASPProtect Code *** -->
<html>
<head>

Good Morning - I getting errors in my system log that says "404 file not found" for a number of files - Here are a few examples:

/aspprotect/password_admin/ drop1.gif http://cidra.easycgi.com/ aspprotect/password_admin/edit.asp? User_ID=181	4	0.28%
/aspprotect/password_admin/ drop2.gif http://cidra.easycgi.com/ aspprotect/password_admin/edit.asp? User_ID=181	4	0.28%
/aspprotect/password_admin/ left1.gif http://cidra.easycgi.com/ aspprotect/password_admin/edit.asp? User_ID=181

I ideas on how to fix this?  Note: The system seems to be working fine, but I want my log files as clean as possible. 

Thanks.  shirley

ok... glad ya figured it out.

Yes.. for ASP server side code to run the page extension must be ".asp". I was gonna mention that but I guess I just didnt think anyone would do that.

no offense.. not everyone works with this stuff every day..

Ok i was wanting to know what the "if then" statement would be if i wanted to show xxx if your group is xxx.

I tried

    <% If Session("Groups") = "1" then%>
    <font size="2">TEXT HERE</font>
    <%end if%>

But that did not seem to work.

The setting I am most interested in is what you have for the "Pic_Max_Image_Width" used when the image resizing components resize the big image

setting it to nothing or zero could cause this

if that account isnt there thats normal because if it doesn't have any permissions for that folder so it wouldnt be listed

you simply dig into the menus a liitle deaper and find it then add it.

sorry, I am guilty of being very tired and didnt read your message fully.

I know this forum area is called "database connection issues" but it is only meant for generic issues.

Issues specific to a particular application need to go in that applications area in the forum. It keeps the forums more organized and helps other people fnd help later on.

So please post in the correct area.
I will answer this question soon. I have to do something 1st though.

This may be an old question ??? If it is please point me to the post or documentation where I can find the answer please.

When creating protected pages I am using the following to protect them:

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="/aspprotect/check_user_inc.asp"-->

But that is not working. I get the following error when I try to access the members logon page in the directory that I wish to add the pages to:

Active Server Pages error 'ASP 0130'

Invalid File attribute

/filelocation/filename.asp, line 3

File attribute '/aspprotect/check_user_inc.asp' cannot start with forward slash or back slash.

However if I create the pages in the root of the AspProtect directory and use a link to the same page that exists in the AspProtect directory and the following include:

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

The pages work fine.

I really do not want to put all of my protected pages in the root of the AspProtect directory.

 I would like to mix protected and unprotected pages throughout the site in order to #1 make it easier to administer. #2 keep the AspProtect directory solely for authentication. And, #3 keep any user authentication pages out of the AspProtect directory.

TIA

The count is in the album area where the small pictures and description of album.   Viewed 1 time(s)  This count never changes.

Thanks

 John

For all you advanced users..

Here are two examples of ASP.NET code you can use on your ".aspx" pages to call banners from the ASP 3.0 version of ASPBaner Unlimited V8

This code is not supported... and you of course must change things accordingly like the variable names and zone numbers to match the zone you want to call banners from as well as the url.

2004-08-27_153832_asp.net_examples.zip

I'll give it a shot loading it on the laptop and publishing it, if it doesn't work I'll let you know and you can take a look at it tomorrow afternoon.  Thanks for all the help tonight...

Good luck pouring that concrete!

It should be released sometime late May 2004 or early June 2004 but no gurantees as I am pretty busy right now with some projects.

There will be upgrade instructions and it should be a fairly easy upgrade.

[/QUOTE]

Like I said no guarantee... I have a lot of things going on... it might not even be finished till the end of July... customers will always be able to get it for the difference in price

You have the version listed on the site when you purchassed it.
Version 3.0

You really should check out the documentation regarding the config file before you go any farther.

If the server supports ASP.NET you do not have to spend any money to have real fast loading thumbnails.


Also, licenses of ASPImage only cost 69.95 and regardless any quality host supporting ASP should have one of the 3 supported resizing components installed or else you should consider a better host like www.alentus.com Places like that have good hosting prices and give you access to 3000.00 worth of 3rd party asp components.

Our login works great, variables even help determine menu options.  When user logs on, however, it opens in a new page.  Is there a setting somewhere that sets whether you can open in a new or existing page?

Also, when you log off