If you still cant see the upload buttons after checking the settings send me a PM with the info and I will take a look at your installation. It will have to be up on a live server of course.

If you code support for it yes, the application comes with no paypal code or support built in.

If you think it will help you, you are welcome to a copy of the classic asp version which supports paypal subscriptions. Perhaps looking at the code would help you.

Your SQL statement to the database is the key.

You want to change the sortby hyperlink on that page so that it will in turn change the dynamic sql statement to sort the way you want

Find

?SORTBY=Date_Created

change it to

?SORTBY=Date_Created+ASC

or maybe

?SORTBY=Date_Created+DESC

One of them is the default anyway, but I cant remember which is which off hand so just try them both till you get the desired result

near the top you can also change the default sortby when thet page is loaded

SORTBY = Request("SORTBY")
If SORTBY = "" Then
 SORTBY = "Name"
End If

there you would use a space though.. not a "+" sign when adding the ASC or DESC

The + sign is only used in the hyperlinks because it means a space for browsers that can't deal with spaces in links

if you use either of those options the mail server info you use must of course be valid (example: mail.somesite.com) your host can provide that info

you should also make sure your sending the emails using an account at your email server.. not some other email you have


other than that if it does not send emails it could be because your hosting company may require authentication for outgoing emails...

ask them ...

if that is the case the version of ASPBanner you have does not support sending email that way and you would need to add the necessary code to any places that send email... in order for emailing to work

I will actually explain how to set access_levels and/or groups...

in "users/add_new_account.asp"

Sorry, I forgot about that when I got hung up on the install problem.

 I'll tackle your explanation now to see if I can get it working. Since I already bought the software I'll keep my fingers crossed.

Thanks

Hi Chris,

I tried changing using Notepad in the config_inc.asp

from:

If  Application("SERVER_SOFTWARE") = "" Then
 Application("SERVER_SOFTWARE") = Request.ServerVariables("SERVER_SOFTWARE")
End If

To

Application("SERVER_SOFTWARE") = "iis/6"

and the albums still do not show up under the categories

Rhona (rookie)

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
    Response.Write(Session("Groups"))
%>

Hello,

Unfortuantely I can not help you much regarding the javascript because I am a server side code kinda guy. Client side javascript just isn't my thing. That was free javascript code that I used for that function. I really do not know enough about editing client javascript. Sounds like you might though.

Style 1 is really a relic left over from the standard version. I just left it in in case someone wanted to use it. Like I said because it is javascript making it do more than it does is tricky (at least for me)

Now,, for actually getting description code. The thing to do is check out how that all works in the pic_window.asp file which is what style 2 two uses. Bascially descriptions for an particular album get stored in one text file. We read that test file. Put the lines into an array. Then display the info which gets run through a functions to convert some special characters used when saving back to normal.

I tried to look at your site but it woulnt load for some reason.

I'll give it a shot within the next day or so. I'm busy with a few other things right now.  You're right about just saving a copy before I start. It can't really hurt anything.

Thanks Chris. I'll let you know how it turns out.

-john

any asp code that accesses an access database, writes to text files, or allows for picture uploading will need permissions set on certain directories

every application out there is going to need permissions set at some point

its just a fact.. and if your hosting company does not give you a way to manage permissions or have it done when you ask they do not know what they are doing and they are not supporting your asp hosting needs

see my article for more info on the whole process
http://support.cjwsoft.com/code/moreinfo136-1.htm
the part newar the bottom talks about hosting companies

The ASPProtect v7.x Documentation is now available as a download in windows ".chm" format. (needs to be viewed on a windows based machine that can read it) If you are using XP with Service Pack 2 follow the instructions below or you will not be able to view the help file.

Download Documentation

You should save this file and then open it.
Just opening it from download may not work and you will not be able to read it correctly.

Please continue to check the support forum threads for the most up to date documentation.


IMPORTANT
If your are using xp with service pack 2 there are some new security features that can block the access of help files you download. So as far as the ".chm" file goes.. you have to download it... right click on it...go to properties... then  choose unblock down in the lower right corner ...then you can open and view the file correctly

lmao ... ya that has never happend to me before....

Hi,

I wanted to see if you had any suggestions for converting from Access to SQL sever database. I attempted this earlier today performing the following steps.

1) Create SQL Tables using Enterprise Manager / SQL Scripts
2) Use DTS to move all of the existing table data to the sql tables.
3) Update dataconn_inc.asp to use SQL and the required connection string.

When these steps were complete I was able to login to ASPProtect as an admin and search / find both groups and users. However, any attempt to edit or create users resulted in a "the page ... had a problem ... " type problem. It seems that I can read from the db fine but and getting errors writing to the tables. The user id that is being used to connect to the db is the [dbo].

Any additional hints for this procedure?

Thanks

Darrell

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen 3 times. Twice on my own server when the power went out for 2 hours and once on a customers server.

Basically the application variable system gets all messed up because it was not shut down properlly.

The ways to possibly cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.
If not... keep reading for the more drastic cures..


Go to the command prompt on the server and type "iisreset"
Sometimes that is enough.

Reboot the server.
Sometimes that is enough.

Stop the web in the IIS console.
Sometimes that is enough.

Stop the individual processes for each web in iis
"you must really know what you doing and be very careful about doing this"

Remove and recreate new applications in IIS for the web in question.


And sometimes it just takes a combination of the things listed above and a few reboots. I don't know the best way to cure it but I do know why it happens and the steps listed above can get things back on track.

Again, this is because the server lost power or crashed as far as I know.
It was not allowed to shut down properly which sometimes happens.

You'll know things are ok again when you see your banners show up on your site.

Please forgive any ignorance on my part.

Using the live demo, it seems that with the banner software my advertisers would only have access to reports, but no ability to upload banners, specify keyword triggers or zones, what have you. Is this correct?

The other thing I couldn't quite figure out, assuming I had a categorized directory on my site, is this system configurable to display different banners based on category? Perhaps through keyword triggers?

Thank you in advance for any assistance.

This may be an old question ??? If it is please point me to the post or documentation where I can find the answer please.

When creating protected pages I am using the following to protect them:

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="/aspprotect/check_user_inc.asp"-->

But that is not working. I get the following error when I try to access the members logon page in the directory that I wish to add the pages to:

Active Server Pages error 'ASP 0130'

Invalid File attribute

/filelocation/filename.asp, line 3

File attribute '/aspprotect/check_user_inc.asp' cannot start with forward slash or back slash.

However if I create the pages in the root of the AspProtect directory and use a link to the same page that exists in the AspProtect directory and the following include:

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

The pages work fine.

I really do not want to put all of my protected pages in the root of the AspProtect directory.

 I would like to mix protected and unprotected pages throughout the site in order to #1 make it easier to administer. #2 keep the AspProtect directory solely for authentication. And, #3 keep any user authentication pages out of the AspProtect directory.

TIA

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

Thought this would be easy.  A few more pointers should get the database connection to work:

1) How do you decide whether it is a DSN (system datasource) or not? Does just putting the file in the ODBC make it so? 

2)We have other files in there for other server applications, does that mean we’re stuck using DSN’s or is the file independent of that control dialog?

3) Assuming we get rid of using DSN for this database (or not), does the code go referenced in your article http://www.powerasp.com/content/hintstips/permissions.asp apply here or should it just work?

What else are we missing?

At one point I was using CDONTS_Installed but since I moved to a new Windows 2003 server I was told by my ISP that either one of these will work

Nov 2005

that would probably work...

any ".aspx" page can grab that data after someone logs in..

Session("Username")
Session("User_ID")

etc etc

anything you see set in the "aspprotectlogin.aspx.vb" file will be there

any data not set there would have to be added and then the project recomplied so that data gets saved...

My ISP uses ASPSmartMail. The email confirmation works except when I try to register an AOL user the server returns an error 500.

No worries

then..

is there any way I can get rid of those information shown on User activity screen, so I can at least know who logged in current day?

thank you in advance

ok,

IE and firefox do some things differently.

It could very well have to do with MIME types set on the server for your website. pdf probably isnt set as a mime type which can cause issues with file streaming situations.

Mime types are either set in the IIS console for your web site under the http headers tab or you can try setting the content-type header to 'application/pdf' right on the asp page the does the streaming

see this article which shows how to do that
http://psacake.com/web/gj.asp

'Specify a MIME type such as "text/html", "image/gif" or "application/pdf"
Response.contenttype = "application/pdf"
'Useful in cases for unknown file types

You would want to put the code that sets the contentype as close to the top of the asp page doing the streaming as possible.

ASPProtect Version 7
Expiry Notices go out to members who have recently renewed by subscription.

When an existing member from ASPProtect Version 6, with an expiry date, renews with SUBSCRIPTION in v7, the previous expiry date remains unchanged.
We assume the expiry date remains blank with NEW Subscriptions and that Paypal takes care of notifications.

 But our notifications to the "about to expire" dating from v6 catches the "Renewed by subscrtiption" as well, as the date has nor been changed or removed, and this REALLY confuses our members.

Can this be resolved?

Humm, I can see all those pages loading just fine at both domains so you got me pretty confused at this point as you just said they didnt load.

regardless, the data connection tests are failing with both of them.

so let me ask you again how are you setting permissions on the database folders?

Change the action of the form to the page you want them to log into.
Make sure the page you send them to is protected by the "check_user_inc.asp" file.

<center>
  <table border="0" width="400" height="200" bgcolor="#000000">
    <tr>
      <td bgcolor="#F4F4F4">
        <form method="POST" action="memberarea.asp">
          <input type="hidden" name="Status" value="Checkem">
          <p align="center"><font face="Arial">ASPProtect Login</font></p>
          <div align="center">
             <center>
             <table border="0" bgcolor="#C0C0C0">
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Username</font></small></stro ng></td>
                 <td><input type="text" name="Username" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Password</font></small></stro ng></td>
                 <td><input type="Password" name="Password" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB" colspan="2"><font face="Verdana, Arial, Helvetica" size="-1"><input type="checkbox" name="KEEPMESIGNEDIN" value="True">Keep
                   me signed in on this computer unless I log off.</font></td>
               </tr>
             </table>
             </center>
          </div>
          <div align="center">
             <center>
             <p>&nbsp;<input type="submit" value="Login"></p>
             </center>
          </div>
       
        </form>
      </td>
    </tr>
  </table>
  </center>

Ahhh....yes, I always forget about the cache.  That's exactly what it was. 

 I had made modifications to the import_pics.asp file, because I added more fields to the db, and made the import folder path dynamic, but I seem to have forgotten to add in the response.expires=0

Once I added this back in it has stopped messing up.

What was happening was, it wasn't overwriting the files, nor were they too big, but you would click on one thumbnail in an album(category) and it would display a picture from a totally different category.  It seems browser cache was the culprit, however.

Thanks for the quick reply, great product tooo!!!

I purchased two site licenses for ASP Protect a while back and am now trying to implement the application.

The connection to the database is fine, because it recognizes the user and displays the user name.  However, there must be a problem with the permission because I get the DNS error information from the On Error in the check_user_inc.asp file.

I set the permissions on my PC as you indicated, both on the folder and the database file.  But get the error and cannot access the database to view or modify.  I also uploaded the file to my web server and set the permissions as well, but get the same problem.

You mention on your forum that it is not the code, but I don't understand if the code is correct and if it finds the database and the permissions have been set as you indicate, why doesn't the code work?

Humm.. that should have worked fine

why are you getting a "OLE DB" error I wonder ?

I need more information. 

Database being used and version ?
Server OS Version?
Connection String being used ?

etc etc