Hi Chris,

We installed our key onto the live server.

However, since our temp key has expired, we can't access our application on our development machine because the login won't work anywhere except on the live server.

Of course we can access the application on dev, if we remove the aspprotect tags, but if we need to log in to do something unique to the user, then we have a problem.

Can we get another temp key from you? And would there be a better long term solution to this debug/maintanence issue?

--JP

like I said you made changes to something to cause that...

users/user_area.asp

runs fine the way it ships "it is one of things I tested earlier when I looked at your installation for you"

If you want I'll go look via FTP and tell you what is wrong

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

I set the max image width to 1000; previously it was null. Now I'm getting server errors:

page not found, then, service unavailable (the page is there). But in a new album, the images imported fine and it seems to be working now, despite the IIS issues.

I think my host restricted the amount of memory and resources my site is allowed to use.

There is no way I'm going to spend hundreds of dollars for a thumbnail creation program. Mine is a family web site and all out of my pocket.

Is there any free products that work with Gallery that will create the thumbnails? If not can I create them on my own and link them to the pics? There are tons of Perl based freebies out there.

Steve

Sorry, should have added,  if i change the connection string, i can also get this...

[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

ok,

IE and firefox do some things differently.

It could very well have to do with MIME types set on the server for your website. pdf probably isnt set as a mime type which can cause issues with file streaming situations.

Mime types are either set in the IIS console for your web site under the http headers tab or you can try setting the content-type header to 'application/pdf' right on the asp page the does the streaming

see this article which shows how to do that
http://psacake.com/web/gj.asp

'Specify a MIME type such as "text/html", "image/gif" or "application/pdf"
Response.contenttype = "application/pdf"
'Useful in cases for unknown file types

You would want to put the code that sets the contentype as close to the top of the asp page doing the streaming as possible.

Honestly cannot comment much about v7 since it was just installed on a new server.  We have been running 5.03 for years so I'm looking forward to the new features in v7.

Lance

--------------------------------------------
(( TRY THIS AT YOUR OWN RISK !!))
--------------------------------------------

2004-08-19_122127_ASPBanner_V7.3_code_banner_encode_decode_m od.zip

This is an Expirmental MOD for ASPBanner Version 7.3 Only
Do not use it on other versions....

It encodes CODE Banner information before saving it into the application variables that handle banner rotation. It then decodes that information before displaying them on your web pages.

The reason for this is SOME very complex javascript does not always save correctly into the application variables that rotate banners (even when not using the JavaScript Method to display the banners)

This way the javascript or whatever you entered comes out on your web page exactly as you entered it and runs correctly.. but there is little more processing going on to handle the encoding and decoding. But its probably nothing to worry about and won't effect performance at all.

Unless your having a problem don't use this mod. It is not officially supported in any way.

-- DIRECTIONS --

( COPY THESE FILES INTO YOUR ASPBANNER DIRECTORY AND BACK UP ALL THE FILES THAT YOU WILL BE REPLACING ))
(( SO YOU CAN REVERT BACK IF THERE IS TROUBLE ))

If you are wondering if the "appinfo_inc.asp" included has the weight banner bug fix applied to it already. That is a bug mentioned in our forums

ALSO:

(( YOU CAN NOT USE THE INCLUDE METHODS OF CALLING BANNERS WITH THIS CODE ))

(( YOU CAN NOT USE THE JAVASCRIPT METHOD OF CALLING BANNERS WITH THIS CODE ))

(( USE ONE OF THE OTHER METHODS ))

You would carefully use the built in features of access to import/export data.

The password for our databases is noted in the documentation. It's pretty hard to miss really. You can also see the database password by looking at the connection string info.

different versions may be different but it is usually "temp" minus the quotes

I have ASPProtect up and running and I was able to log in with little to now problem after following all of the directions. 

I imported my data base of users (approx 5300) into the access db, and now it times out just letting me log in.

I've got full access to the web server to make any changes on that end that I need.

any ideas?

Hey, I run a business and I will not have things like that mentioned in these forums.

Hi Chris

I've just recently purchased ASPBanner and have been testing out serving multiple Tradedoubler code using the IFRAME method. I have four types of banner on the same page refreshing every 15 seconds. (this will change on the live site) 

I've been leaving the IE page up for x hours and coming back to find between 1-3 of the banners has stopped and in place is an "internal error".

BannerZone=3&Refresh=15|40|800a0046|Permission_denied 80

I thought it may have been the SQL permissions from one of your other messages so I gave the banner user the DataReader and DataWriter permissions.

Its still happening and around the same time in the logs theres a couple of file not found errors.

BannerZone=2&Refresh=15|23|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=4&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=1&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

Any ideas? I'm hoping its not the server as there is currently only 2 sites on it and this is pretty much the only traffic.

Thanks

Colin

I just moved servers and now my "code" ads are giving me errors...

"google_ad_width" is undefined.

I have tried adding the width and height... taking it out.. all the basic stuff.

Any ideas?

TIA  

Ok time for some more questions!!!

Is there a way to make the person's email address their default username... or force it in somehow instead of allowing them to create their own?

Kurt,

There really is no default width in general.

The thing to remember is that the default.asp page includes a lot of different pages.. and some of those pages also include pages.

Now all of this gets wrapped by the header and footer include files so in a sense what you do there can effect everything inside to a certain degree.

Now there are some widths set here and there for different tables and what not on certain pages, but its really the kind of situation where you just have to dig around in the code and experiment until you eventualy find what you are looking for and get the desired result.

I'd love to tell you there is easy way to just set a width, but it is not that simple.

Maybe someday it will be. Just not in the current version.

CJW

It's just a generic error that means one of 1000 different things is wrong.. there is a lot of information on in in these forums as well as links to articles about it.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=27& PN=1

usually it means permissions to the database folder are incorrect or the physical path you are specifying for your dsn-less connection is invalid..

everything has to be perfect

Sorry, there is not any documentation on that.. it is basic asp/database work and customization like that is not supported. I recommended looking at what is already there and using that as a guide to produce more fields. etc etc

Hi-

Thanks for the quick response to my previous posts.

This is my issue:

I have read over all the docs and installation instructions and can't find a way to do this:

my default page in my root dir will be a log in page which will take the user once his level is validated to a "home page". Is there a page in your examples that will perform the function of this log in page? or should I rename check_user_inc.asp as the default and change it's html output to make it look like my log in page?

I also looked within the code for check_user_inc.asp and did not see where to specify where the user will go once he signs in.

Your help is appreciated

Making progress. I have made the appropriate settings and now I have the option to upload.  When I upload, I get the following message:

 "Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard"

I am using IE6 XP SP2.  I also am using DUNDAS UPLOAD, ASPIMAGE.

I think I set permissions correctly bot not positive.  I have given all auth to everyone for the database etc.

More info on the groups session variable.

Session("Groups") will contain the ID numbers of whatever groups the user is a part of.
It does not store the descriptive name of that group. It will show the same data that is actually stored in the "Groups" field in the database.

for example it might hold a value like this

*2*,*5*,*9*

meaning a user is part of groups 2, 5, and 9

so if you wanted to check to see if a user was part of a particular group you would do something like this

<%
If InStr(Session("Groups"),"*9*") Then
     Response.Write("You are a member of group 9")
End If
%>


Taking this even further, if you really wanted to get a particular group's name or description you would have to query the database like so. In this case we ask it the name and description for group 9.

 Group_ID=9
 Set ConnPasswords = Server.CreateObject("ADODB.Connection")
 ConnPasswords.Open ConnectionString
 Set cmdTemp = Server.CreateObject("ADODB.Command")
 Set CmdEditGroup = Server.CreateObject("ADODB.Recordset")
 cmdTemp.CommandText = "SELECT " & tbl_label_groups & ".* FROM " & tbl_label_groups & " WHERE (Group_ID = " & Group_ID & ")"
 cmdTemp.CommandType = 1
 Set cmdTemp.ActiveConnection = ConnPasswords
 CmdEditGroup.Open cmdTemp, , 0, 1
  
 Group_Name = CmdEditGroup("Group_Name")
 Group_Desc = CmdEditGroup("Group_Desc")

yes. what you are talking about has to do with norton ad blocking software.. it blocks images or paths that have the word "ad" in them.. and you see red x's where images should be on web sites.. usually

it is different then what this thread initially mentions which has to do with a code/server issue with the application variables.

I did the initial steps of downloading the sql scripts and running it in Query Analyser, tables created fine.

I can login for the first time. I exit from the browser and then I cannot login again. This happens for every user and admin.
I noticed that the values in the fields "Login_limit" and "Active" in the ASPP_Users table in the SQL changed to NULL and 0 when login and remained in those values after close the browser.

So iam just struck not able to log in. Pls advice.

That's exactly what it was.

The site owner couldn't see their own ads because Norton was blocking anything with the word ad in it.

On another note: I changed the word 'ad' to 'listing' and got it to show even with Norton.

thats a new one... I need some sort of error to go on..

No error ever ? It must eventually show something ?

thx, thats a known error I forgot about.

I just updated the zip archive so the error is gone but if you bought ASPBanner Unlimited Version 7.3 Before April/06/2004 you can optionally apply the fix.


To fix it (only if you want to use the option explicit method of calling banners and not even a really necessary fix as this is just an error in the generated code your supposed to use)

Just edit aspbanner/zones.asp with a text editor.

Where you see the double dim carefully remove one of the "dim" s and save the file.

What about browser caching ? It can happen easily especially if you update pictures over one another.

emtpy out the temp files of ie (take a while usually).. close all ie windows and go back..

Otherwise I need detailed info on the problem. What you told me is not enough to troubleshoot. There are so many factors like what image  image rezie component you are using, the size of the pictures before conversion, server resources, what your doing regarding 3 albums.... etc etc

I have imported 100 pics at a time into an album on a fast server with no issues. Thats using any of the image resizing components.

If an album is new what your describing should never happen. Again, it think what your seeing is browser caching playing tricks on you. We have anticaching things in place so thumbnails never do that but not for the large images.

The Read-only attribute i was referring to is at the windows explorer level when looking at the folder properties under the general tab. 

ASPNET and IUSR have full access to the _database folder as you suggested - Yet still I get the permission error noted above.

Your going to have a lot of problems and a lot of the code will have to be re-written.

There are a lot of things in the the code that the MYSQL database system does not support or has issues with . I know because I once made a version of ASPBanner work with MYSQL and it took weeks of work to get it stable.

Null field types can cause problems... but mostly ADO updates which I don't think MYSQL supports at all. All of the ADO stuff would have have to be rewritten.. etc etc

That's probably why you cant get much of the code to write to the database.


Here is a generic example.

An update to an existing record using ADO
http://www.powerasp.com/content/database/ado_update.asp

And update to an existing record using an update query.
http://www.powerasp.com/content/database/using_update.asp

All through the the code the ADO updates would have to converted to update queries which means a lot of work.

I used ADO a lot because I like it and it is little easier to validate data before it is written to the database.

It is also a little easier for customers to understand when they look at the code.

Anyway....

The app just was not designed to work with MYSQL.
It was specifically designed to work with MSSQL and MSACCESS only.

This holds true for all of our applications.

Your running off an IIS 5 Server so I would suggest just using MSACCESS as the database. The Photo Gallery app will run very well using MSACCESS. 

sorry, I am guilty of being very tired and didnt read your message fully.

I know this forum area is called "database connection issues" but it is only meant for generic issues.

Issues specific to a particular application need to go in that applications area in the forum. It keeps the forums more organized and helps other people fnd help later on.

So please post in the correct area.
I will answer this question soon. I have to do something 1st though.

I am also getting the "Unspecified Error" message.  I just transferred my site to IIS 5.0 and I get that error now.  However it does not happen everytime.  I can click on a page and it opens fine and then I hit refresh in the browser and I get the "Unspecified Error" message.  What could be causing this?