Hi,

I need to be able to add about 9 checkboxes to the register.asp. would I be able to use one of the custom fields?

The other thing is once I add the checkboxes the value must be written to the DB and later read when displaying the person's Album.

Any idea on how I can do this.

Thanks

If you need to know how to enable them on your test server.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1

ok

1st off, what application is this in reference too?
This question should be under that application's area in the forum.

2nd, really need more information and details. There are many ways and methods to send emails and they can all effect what gets delivered and what does not. All on an email server side of things. (I always recommend using the CDOSYS option using SMTP authentication with a real external email that has valid MX records) see my article...
http://www.powerasp.com/content/new/sending_email_cdosys.asp

3rd, your not telling me how many users we are talking about. ASP is not a very efficient way to send emails and extremely large amounts of users should be sent emails in a different way then from an asp application. It is just the nature of the technology being used. Some of different emailing methods the application supports may or may not give you better results. It is really best to experiment though honestly the option I mentioned above is always the best in my experience.

4th, if you are not getting a timeout or a scripting error than the ASP part of things is making it through the amount of users. You have to remember that often time emails that get sent out from web sites end up in junk filters for whatever reason. That is just another fact and why it it is usually best to send out serious newletters using a stand alone application like WorldCast or something.

I am doing a lot of guessing here because you really did not tell me much. I also still am not sure what application this is in reference to as 3 of my apps have newsletter features of sorts.

I dont know about the unspecified errors. I really need more detailed information. (Since it has been working fine for quite a long time you might want to consider installaing the application from scracth again and see if you still get errors)

As for the log in not persiting. Did you by chance turn off cookies in your browser ? They are required for forms based authentication to function. Otherwise, yes you would need to log in to each and every page as you moved around.

I will actually explain how to set access_levels and/or groups...

in "users/add_new_account.asp"

Chris.

After I had you install ASPProtect I added the ASP protecting code to the top of my home page:

<%@ LANGUAGE="VBSCRIPT" %>

<% CHECKFOR = "1" %>
<!--#INCLUDE FILE="../../check_user_inc.asp"-->

Then I made my index.html page my login page buy using the script "Login form on a non protected page" on that I changed <form method="POST" action="memberarea.asp"> to <form method="POST" action="home.html">. 

When I try to log on to that page I get en error page HTTP Error 405 - The HTTP verb used to access this page is not allowed. Internet Information Services (IIS). I checked with my hosting company GoDaddy.com and they informed me that due to the fact that they do not have ASPProtect instaled on there systems they can not support it.  In recent conversations you told me that you have customers that do use godaddy and you products. 

Can you please tell me what I can do to get this working?

Thank you for your time and help.

I did a sign up.. your verify URL is not saved/set in the application variables.

try saving the admin settings page again.. or reboot the server so the settings get reloaded

if you can make sure the web is it's own application in IIS

if it is your server do and "iisreset" from the command prompt

if all else fails you got iis application issues with the site... wait till tommoro to see if the setting gets loaded

Thank you for the response to my question. In the mean time if I can figure any workaround I will post it here.

As an update to this thread I fixed the "upload_post.asp" page quite some time ago but forgot to post the updated file here.

So here it is.

2005-09-16_165913_upload_post.zip

how about translating the error to english..

Looks to me off hand that it would have something to do with the SQL server itself not being run in an english lcid/format and causing some sort of date issue.

I would also suggest you start off with a brand new blank SQL ASPBanner database and make sure that works before you attemp t to import any data into it.

ACCESS DENIED

INVALID Username & Password

Username HAS EXPIRED

Terribly sorry, but we are not software-technical.  So can you please tell us exactly which folder the database would be in.

Thanks in advance.

not really, aside from looking in paypal and manually adding each one for each user...

how many users are we talking about anyway ?

and were any of the users new sign ups from scratch because if they were and that field didnt get populated that is weird?

ultimately aspprotect does not use that field. I was just storing it for the sake of storing it... so its not a big deal but I would still like to figure out what is going on

removing the expiration dates from paypal subscripbers will be enough to fix the issue your having about them getting the expiration notifications

http://gibsoncity.info/guestbook/default.asp

Reports 65-messages, however after the first 10 are displayed and you click on the More Messages button, I get the Page cannot be found error.

Hi all

I logged in myself to my website, and I tried to log in to another with same username and password. But I was able to log in again.

It was supposed to block me from logging in, but it let me to log in.

there has got to be some configurations I must have missed.

Could you instruct me on this Concurrrent login so mine works as well...

thanks

Hello,

In that version is is not easy to change the values as they were not intended to be edited. You would have to dig through quite a lot of code as those values are hardcoded in quite a few pages. Probably at least 10 or more.

In the pro version there are variables you can change that very easily as that is intended to be easily changed in that version.

I have ASPProtect up and running and I was able to log in with little to now problem after following all of the directions. 

I imported my data base of users (approx 5300) into the access db, and now it times out just letting me log in.

I've got full access to the web server to make any changes on that end that I need.

any ideas?

one thing to note... the time period we are talking about is going to to be whatever you have the session timeout set at in the settings.

perhaps making that value lower like 10 minutes is an option for you.. and might help to deal with situation

enjoy the bar.. drink one for me.. cause that was the problem..

Thanks very much for the quick reply.

That sets my mind at ease

I was just worried if users would see warnings in their firewall software too.

I realize that the admin would have to have to go through some errors...

And since we are throwing things in here... Definately, if you have your own server you need a Hardware Firewall and a Managed one at that. The internet can be pretty dangerous for business if you don't.

Plus, I agree Black Ice although in it's heyday a few years ago was considered great. It is not suitable for todays standards alone even for the normal user (But, it is required by the company I work with for VPN. I think it's stupid too using old technology. I have 2 more firewalls setup besides that just so that I do have some security. And, that's just for my PC)...

Thanks 

Chris: You are right about a little extra coding to make it work. I am still learning .ASP coding, so I did a little web searching and used IF THEN statments to confirm a member logged in with a valid Access Code. If valid, the protected page executes, with the Member's Name and Access Level on a single line at the top of that page. Looks sharp! If not logged in, or a non member (who found the page via Google), I used a Redirect to send s/he to a login page with optional links as you suggested (http://www.vspa.com/aspprotect/vspa-password-failed.asp) . I couldn't get it to work when using Group Access, but I am sure that is just because I am a novice at .ASP (I will post that example when I figure it out). Meanwhile, here's the code I used that works:

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="dataconn_inc.asp"-->
<!--#INCLUDE FILE="check_user_inc.asp"-->
<!--#INCLUDE FILE="config_inc.asp"-->
<% =Session("First_Name") %>&nbsp;<% =Session("Last_Name") %>:
<%
If Session("Access_Level") = "6"  Then
    Response.Write "VSPA Active Member Access Level 6"
 End If
If Session("Access_Level") = "7" Then
    Response.Write "VSPA Life Member Access Level 7"
 End If
If Session("Access_Level") = "8" Then
    Response.Write "VSPA Officer/Staff Access Level 8"
 End If
If Session("Access_Level") < "6" Then
    Response.Write "Access Level 1-6 NOT AUTHORIZED RESTRICTED AREA ACCESS"
    Response.Redirect("vspa-password-failed.asp")
End If
%><!-- http://www.vspa.com/aspprotect/vspa-password-enter.asp -->
<!-- *** End ASPProtect Code *** -->
<html>
<head>

ok, that probably means the physical path you have set for the logfile directory (in the admin settings area) is not correc t

the error pretty much means just what it says

The login page sends the user to redirect.asp (which is as follows)

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
If InStr(Session("Groups"),"*1*") Then
    Response.Redirect("gp01.asp")
End If
%>

<%
If InStr(Session("Groups"),"*2*") Then
    Response.Redirect("gp02.asp")
End If
%>

I am not being redirected to gp02.asp if I am a member of group2.  Also, we wish users who are part of group 2 and 3 to go to a different page (ie. gp2-3.asp)

Thanks in advance.

check permissions for the user you are connecting to the SQL database.
http://support.cjwsoft.com/code/moreinfo122-1.htm

That user may not have permission to make new data

Also,  check all field and table settings manually by comparing them to the SQL creation script we provide. You may very well be missing auto increment and primary keys which would make adding new data not work.

It is most likely one of those two things.

here is a thread that may help you if this is what you were getting at

http://support.cjwsoft.com/code/moreinfo389-1.htm