You need to make sure you created the SQL database using the SQL scripts we provide and that no errors occur whatsoever. That is extremely important. You must use our SQL creation scripts.

Then, when you create the user you need to go back to that user and make sure you check the admin account and save that user again. (many times when setting up a system for someone I find myself forgetting that step and then I have to go back in and check the admin box for the user I created.)

And of course create the user from the ASPProtect admin area web interface. Do not add the user to the database manually because you will have no way to enter the password correct as it is encrypted. And do not change the encryption key after making the user/.

It would also be wise to check the SQL server database at every step to make sure the user info gets created and that all the field info looks correct for the most part.

You also want to be sure to specify SQL as the database type side the connection string info as the SQL directions go over

a remote sql server should not an issue.

thats really all I can think of right now

I need a point or a little insight please.

I need to get information from a credit card authorization called netbilling. I have been looking at your code for PayPal and 2 checkout. I have a feel for the code flow and the relationships of the "includes" .

I have been doing a lot of reading in my books and am seemingly twisted around the axel. I am not expert in ASP I am better in VB. I am not afraid to write code I am just a little nervous about messing up existing relationships.

My plan is simple: code a page to open the database and populate the database fields from netbilling and convert their field name to yours in the database.

I appreciate your time and insight. As in the past I need your help again.

Thanks

First pass through, I don't see anything changed in the groups section of the check_user asp file. the logoff asp wasn't touched.

I noticed the demo online (on this site) only has pages protected with access levels; you say it works fine with groups also?

Hi,

I am investigating the possibility of purchasing above script having spent some hours trying to integrate various free banner rotators into my Invision portal.

What attracts me to your script is that it has 6 ways to call banners. I am an inexperienced webmaster with only a smatterring of knowledge about ASP. Will ASP Banner be able to integrate with my portal?

Many thanks

David van der Want

Sorry, there is no option for that.

I'll take it into consideration, but the way the banner rotation logic works would make adding such an option very complicated.

Just give it  an expiration date way into the future if you do not want an ad to expire anytime soon.

I usually just make all my ads expire in like 2020 or something like that since I don't want them to stop running either on some of my sites.

Hello..

I actually noticed something was up with your install earlier...
(I saw you in my log files when you clicked to cjwoft from the docs)

I need more info... like what uploading method your using.. what image resizing component, what widths yoru resizing things to... etc

have you tried it while telling it to delete the pics and also while not telling it not to delete them from the import folder

I might have to take a look tommoro as well to really figure it if that is ok

I have to go the bar to meet some friends so I wont be of much more help tonight :)

I been working steady all week and need a few.

CJW

One is for paypal subscriptions (recurring billing) and the other is for single payments

http://support.cjwsoft.com/forum/forum_posts.asp?TID=185& ; ; ;PN=1

http://support.cjwsoft.com/forum/forum_posts.asp?TID=186& ; ; ;PN=1

You can delete any of the 3rd party payment directories you are not using including the the 2checkout one... (all those folders really are is a copy of the users folder specially modified to handle a certain payment processor)

Just Don't delete the "users" folder though as there are things you do there that you can not do anywhere else..  quite a few things..  editing existing account info, looking up passwords... etc etc

I'll give it a shot loading it on the laptop and publishing it, if it doesn't work I'll let you know and you can take a look at it tomorrow afternoon.  Thanks for all the help tonight...

Good luck pouring that concrete!

UPDATE..

Installed a new rack mount 1u server this week.

3.2 ghz hyperthreading 1 mb l2 cache prescott cpu
2 gb pf pc3200 kingston memory
SATA Raid.. (2) 120 gb drives running hardware raid 1

It is a supermicro 1u server case and server motherboard.
The hard drives are SATA 150 120 gb 7200 rpm Diamondmax Maxtors

All high end server type stuff... It's a very powerful server and has been running great all week. 500+ hours uptime so far.

Running Windows 2003 Server Enterprise
SQL 2000 Enterprise SP3
SmarterMail
SmarterStats
Windows DNS
ZipEnable (which I am reviewing for them)
ServerMask (which I am reviewing for them)
A ton of ASP Components which I have purchased over the years.

So that means I can now focus my attention on creating software again instead of being a system admin. (Due to these server issues over the past few months I am now back to godly status as far as windows system administration goes.. not to mention I am now back up to speed on the latest processors and hardware)

So, getting back to ASP Photo Gallery...

I spent about 20 more hours this week on the new version of ASP Photo Gallery Pro.. I have another 40 or more to put into it as I have a lot I want to do.

I think it will be ready within the next three weeks. I know a lot of you have been waiting for something.

Hi,

How do you know permissions are ok in that folder ?
Please tell me more on how they were set.

Please read through my article on how they are set correctly.
http://support.cjwsoft.com/code/moreinfo136-1.htm

Often times they are not set correctly or people thingk they set them somehow but in fact did not do it the correct way.

I would also suggest using the "test_physical_path.asp" page in the "extras" folder to verify if the path you are using to the database mdb file is in fact correct. That page should work whether permissions are set or not. At least then you will know if the path is correct or not and you can go from there.

did you fix it because I see all the pictures just fine ?

http://mcintoshcounty.org/real_estate/view_item.asp?Ad_ID=1

I do not think it it anything to do with the Application.

You most likely have some sort of ad blocking software that is doing it.

It is seeing the word "banner" or "ad" and blocking the images in your browser.

I doubt it is anything built into xp doing it. XP with SP2 has built in pop-up blockers but no ad blockers like that really. It is norton ad blocker or something of that nature.

Hi all,

I have the photo gallery set up at www.kashabowieoutposts.com/gallery

It's great - love to work with it.

But I've never been able to get those with just User permissions to be able to upload... Only an administrator is successful in uploading.  This was no problem in the past, but now this client would like to give their guests a means to share their pictures on their site - so now I have to figure out the bug...

... this is the error I keep getting...

Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard.

------- anyone else experienced this?

Many thanks all!!

Doug

I wonder what that ENDSQLMail send failure is all about ?
I dont use anything regarding SQLMAIL in the ASPProtect code.

I think I might need to go in so I can debug a bit. Everything seems to work fine with a SQL installation here so I just don't know at the moment.

If that is ok with you I would need ftp access or something so I can trry a few things and hopefully figure it out. Admin access to the aspprotect admin area as well so I can see what you have set up in there.

PM me with that info if you want me to take a look.

While attempting the database connection test, I receive the following error:

Server Error in '/' Application.

---

Security Exception

Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.

Exception Details: System.Security.SecurityException: Security error.

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:

[SecurityException: Security error.] aspprotectnet.DBConnectTest.Page_Load(Object sender, EventArgs e) +0 System.Web.UI.Control.OnLoad(EventArgs e) +67 System.Web.UI.Control.LoadRecursive() +35 System.Web.UI.Page.ProcessRequestMain() +2112 System.Web.UI.Page.ProcessRequest() +218 System.Web.UI.Page.ProcessRequest(HttpContext context) +18 System.Web.CallHandlerExecutionStep.System.Web.HttpApplicati on+IExecutionStep.Execute() +179 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +87

[QUOTE=cwilliams]
Is that a real term or just something you named it cause they have like a zillion people using that SQL server?[/QUOTE]

yeah thats it, you buy into a part of the sql server so it's an sql server hotel...

Thanks!  Will try both.

Appreciate the support.

A very common and extremely bothersome error encountered when running ASP apps that connect to a database is the "80004005" error. It comes in many varieties.

These articles cover it.


(an article I wrote)
http://www.powerasp.com/content/hintstips/permissions.asp

(more articles)
http://www.aspfaq.com/show.asp?id=2009

http://support.microsoft.com/default.aspx?scid=kb;en-us;3065 18

http://www.aspfaqs.com/aspfaqs/ShowFAQ.asp?FAQID=115

http://www.macromedia.com/support/ultradev/ts/documents/8004 005_cannot_open_unknown.htm

But can you guess as to why the following might be happening:

1) The password is still "temp", and we verified that by checking dataconn_inc.asp ; 2) People are able to place new ads, etc. ; 3) We then download the DB.  Sometimes we are able to open up the DB just downloaded with the password "temp", but only see the USERS table.  At other times, we cannot open the same DB with any password, and get a "password not valid" message even when using the password "temp".

So what can the problem be?

I did everything mentioned here but it do not work ;(

i've got a client who has handed me a 151 character banner URL, and i see that the database is designed to take 150 characters. i took the obvious step of just increasing the size of that text field in the database, but i still get this error when i try to enter the URL in the proper form field:

Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.

/banners/aspbanner/save_banner.asp, line 200

now, line 200 is just this:

If Banner_Link_URL = "" THEN
 CmdEditBanner.Fields("Banner_Link_URL") = NULL
Else
 CmdEditBanner.Fields("Banner_Link_URL") = Banner_Link_URL
End If

which tells me that something is blocking the assignment of that long value to that field, even though i believed i had extended the length of that field in the source database.

where else might i look?

check the action for the button in the code... its probably not posting back the the right page which should the same page it is...

I bet ya it is posting to guestbook2 which is the wrong directory... an old mistake I forgot to correct...

That was wrong of me but not what I meant. It seems as soon as I purchase something like this it doesn't work right and it can't be altered to work with what I have. The support ends up sucking or being none. Listen I’ve gone thru you're product and it's wonderful and does exactly what you say it does so that's a relief. Sorry about my ignorance with .NET but I’m from an ASP world and it's a lot different. You can see what I’m trying to protect here http://www.hotmixxent.com:8087/default.aspx. The final site after testing will be http://mxais.sfmx.org/default.aspx. Again thanks for the support on Christmas Sunday, that’s defiantly beyond the call and I appreciate it a lot.

Our webhost set the permissions, but the error is still there, so that is obviously not the problem.  We now have both our webhost and our asp support technician trying to figure out the problem and everyone is stumped.  Can you please provide us with the following information to help us out:

1) what is the name of the file that sets the connection string?

2) what is the name of the file, if it is different from above, that sets the password of the database?

thanks

Need to clarify something..

Your talking about the page where a new user registers right ?
Your not talking about adding a new user from the admin area ?

Either way under no circumstances do I see anything like you are saying happening nor has any other ASPProtect user ever mentioned this probem.

I am going to need to see your site and see this happening. It just makes no sense the way you are describing it.

Also. did you edit the registration page code in any way. If so please revert back to an original copy to ensure this is not some sort of problem introduced by editing the code.

humm.. their FAQ is interesting...it looks like some sort of .NET configuration issue regarding security policies like you mentioned

Thats one of the big problems with hosting .NET. Some hosting companies just do do some oddball things. ASPProtect.NET works under default conditions but when hosts go around locking things down to the max there is bound to be trouble. This is the 1st I have heard of this.

Now, ASPProtect.NET does use the "System.Data.OleDb" and "System.Data.Odbc" which your host says they block because they require full trust.

All I can really say at the moment is go with a hosting company like www.alentus.com or www.maximumasp.com that does not restrict your .NET abilities so much.

In the meantime I am going to ask John Evans what he thinks about this.

Is it actually possible, with your product, to password-protect the folder that has the actual database without having to require customers browsing the listings to enter a password, or will password-protecting the database folder prevent customers from browsing the classifeds listings?

Your users with Internet Explorer may have received the "Page Expired" error.  For ASPProtect users, it happens when  the user is not logged on and tries to invoke the target page. check_user_inc.asp puts up the login form, and IE sees it as part of the target page.  Any later attempt to Back up and reload from cache gives the errror. 

in Control_pic.asp is there way to wrap the description field so that it doesn't go outside the table.

Thanks