Making progress. I have made the appropriate settings and now I have the option to upload.  When I upload, I get the following message:

 "Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard"

I am using IE6 XP SP2.  I also am using DUNDAS UPLOAD, ASPIMAGE.

I think I set permissions correctly bot not positive.  I have given all auth to everyone for the database etc.

I'd say that the vendor is right so I've submitted a work order to
create the *****.com/aspnetprotect directory as an application.
If there are any other directories for which this needs to be done,
please let us know. This particular task always needs to be performed
by our staff.


If you need to follow up on this job with one of our on-line or phone
technicians, you can reference ticket id 11860.

With regards

Or at least I think so.  I have been trying to get this software to work so I can see if it meets our needs for an upgrade purchare. Here is my error.

Microsoft JET Database Engine error '80040e10'

No value given for one or more required parameters.

/aspprotect/scripts/populate_config_variables_inc.asp, line 15

My provider says that the problem is NOT on there end, that it is a problem with the code.  I think that it is a database connection problem.  Can you please help.  Below is my connection string based on what the setup page directed me to do:

ConnectionString = "data source=\\NAWINFS03\home\users\web\b1347\rh.957theride\asppro tect\data\database\ASPProtect_access2002.mdb; Provider=Microsoft.Jet.OLEDB.4.0;Jet OLEDB:Database Password=temp"

When I first set up the program I got this error:

Provider error '8000ffff'
Catastrophic failure
/aspprotect/scripts/populate_config_variables_inc.asp, line 11

Once again, the looked into it and said the permissions were fine and that the code was most likely bad.  But then the errror changed to the one that I first listed.  Which is the one I am currently getting. 

BTW here is the page address

http://www.957theride.com/aspprotect/password_admin/get_me_i n.asp

Thank you!

ummm.. ok.. Then this doesnt make sense.  On two out of the three machines I have in house here, the images do not show up.  They only show up on the server machine.  I am using the constant url on all three machines.  www.rfamilystuff.com  Does it show up on your?

how di I change the currency dollar sign to gdp pound sign ?

I need all my tranactions in gdp puund sterling to use on paypal

regards

simon

The only major usability issue I've found to date is multi-zone banners. Cloning is helpful to a point, but then if you have a change to that banner, you have to make the change 6 times or what have you. I think, even at the expense of speed, multi-zone capability for a single banner would be excellent addition. Of course, that supposes I haven't just missed it and it's already there.

Our home page is not showing up gives this error:

Active Server Pages error 'ASP 0126'

Include file not found

/Default.asp, line 246

The include file 'elib/articles/home_feature1.asp' was not found.

I am brought to a logon page in which I cannot access the page.  This must be due to the check_user_inc.asp include.  Without the include I get a blank page.

in Control_pic.asp is there way to wrap the description field so that it doesn't go outside the table.

Thanks

Perfect exactly what I was looking for.

Thanks

Really awesome, thanks..

If possible please be sure to respond to the email they send so the review ends up authenticated

Flash Code Generator

Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.

http://www.banmanpro.com/support/flashgenerator.asp

really all depends on the sql connection string you are using and the names of your sql user you are using...

you really havent described very much..

I'd double check all of it.. something is wrong

here ya go

http://support.cjwsoft.com/code/moreinfo169-1.htm

[QUOTE=cwilliams]Humm, Did you make any changes to the code ?
Solid Black is not the default so it must have changed at least once.[/quote]

I did change the top_logo.gif and the associated link. That was on the default page not the Solid Black skin which is unchanged. After downloading/uploading the skins I tried changing it to one of the Beach skins and that's when it changed to Solid Black and has been stuck there ever since.

[quote]Otherwise it might be some sort of application variable problem.
I would make sure the web is and "application" in the IIS console.[/quote]I don't have access to the Microsoft IIS console as this is a host site. I can access the site's "control panel" but it does allow for those type of settings. Mostly just permissions, DSN entries, etc.

Thanks.
Al

how you connecting... lets see the connection string...

could be permissions related too.. if they are not set correctly
(always give them to the folder, never just the mdb file)

Some of this might help...

http://support.cjwsoft.com/code/moreinfo11-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

you may want to download some of the different versions of the access database from the support area and try connecting to them as you may have older odbc drivers on the server

You may also want to try to get ASPTest from our website working before you go any further

I had both ASP Listings & Classified on the same website.  The categories seem to be getting mixed up. I removed ASP Classified but classfieds categories is still appearing in the student of ASP Listing.

How do I fix this?

Thanks

I dont know. Perhaps a fresh installation in a new folder would be a good idea as well if possible..

for troubleshooting sake..

Ok i am having an issue with my other comp. I have spent ANOTHER 3 hours researching this one.... it WONT START THE IIS SERVICE!!!

I get this error:

The service did not respond to the start or control request in a timely fashion

ANYWAY---

I decided to use one of my client's hosts; which happens to be Network Solutions.

ANYWAY again-

I uploaded the whole thing there and they advised me they cannot do the explicit permissions on that _database folder. This is what they said: I would also would like to point out that ASP.NET applications and permissions do not extend to any other folder, other than the root, (/htdocs/), and the bin, (/htdocs/bin/) folders.  Sub-directories and folder after bin and htdocs will not have ASP.NET permission (read or write).

If you could move or reconfigure your application to save all your code behind, include and dll files onto the root or bin folder, your application could work or possibly run as you would expect.  Please have this done and retest your application. If and when you get a different problem or another error after doing so, please let us know, and we shall be happy to help you troubleshoot any problems that you may have.

There is a 'create database option'  where i can create a database..create a dsnname, user name, password and have to specify the database file name. Once i do this i need to place the database file (aspprotectnet2002.mdb) in the /db folder within the root. I also tried this and made the appropriate change in the web.config but it STILL DOES NOT WORK. I AM PULLING MY HAIROUT WHY WONT ANYTHING WORK.

ALL THE FILES ON ON THE ROOT OF THE WEB HOST. I PULLED THE FILES OUT OF THE _DATABASE FOLDER AND DUMPED THEM ON THE ROOT. I CHANGED THAT ON THE WEB.CONFIG BUT ITS STILL LOOKING FOR SOME .XML FILE IN THAT _DATABASE FOLDER.

I'VE BEEN TRYING EVERYTHING AND IT SEEMS THAT I CANT USE THIS SOFTWARE FOR THE LIFE OF ME

Which page should a user see next after completing a Paypal transaction?  Where do I set that?

Nick

Christopher

Many Thanks

Seems like its working just got to test it bit to see, though it wasnt going to work as I had one too many End If's after the last part of the code you done for me. But even I eventually sussed it, nothing to do with your bit just another mistake on my part

Great to get support like this especially on a Saturday

regards

John

UPDATE..

Installed a new rack mount 1u server this week.

3.2 ghz hyperthreading 1 mb l2 cache prescott cpu
2 gb pf pc3200 kingston memory
SATA Raid.. (2) 120 gb drives running hardware raid 1

It is a supermicro 1u server case and server motherboard.
The hard drives are SATA 150 120 gb 7200 rpm Diamondmax Maxtors

All high end server type stuff... It's a very powerful server and has been running great all week. 500+ hours uptime so far.

Running Windows 2003 Server Enterprise
SQL 2000 Enterprise SP3
SmarterMail
SmarterStats
Windows DNS
ZipEnable (which I am reviewing for them)
ServerMask (which I am reviewing for them)
A ton of ASP Components which I have purchased over the years.

So that means I can now focus my attention on creating software again instead of being a system admin. (Due to these server issues over the past few months I am now back to godly status as far as windows system administration goes.. not to mention I am now back up to speed on the latest processors and hardware)

So, getting back to ASP Photo Gallery...

I spent about 20 more hours this week on the new version of ASP Photo Gallery Pro.. I have another 40 or more to put into it as I have a lot I want to do.

I think it will be ready within the next three weeks. I know a lot of you have been waiting for something.

humm, those are some very big images to be starting off with but I am not sure that would cause a problem under the importing scenario

what width are you having the system resize them to ?

What happens when you upload a image manually (one a t a time)

Also, try the import process out with some pictures no bigger than say 1024 and lets see what happens

Let me put it this way.

My home page (default.asp) is an unprotected page.

When a user that has signed in on another (protected pages) and has the remember me checkbox checked closes the browser cookies should be set for the next time they return.

When the user opens their browser and returns  to my home page (default.asp), I'd like to put a message saying:
Welcome back <%Session ("Username")%>

How is this done?

BTW.. I dont know what is going on But I keep getting all these returned emails. My forum is sending you emails and they are coming back as undeliverable saying your storage space is exceeded on your server.

I was able to get it all figured out.  Thanks a lot for your help, I really appreciate it.  I ended up copying the database with the password to the directory and used the user/password connection code and it works great.  I believe it was related to that but I cannot be sure.  Thanks again!

that is because passwords in the import/export files are encrypted.. if you make one of your own you need to use the rc4 function in the "config_inc.asp" to encrpyt your passwords just like the aspprotect system does (requires knowledge of vbscript and integration into your export system)

now, there is a way around this

if you want to import a file you made with clear text passwords edit "import.asp" beforehand and change

 If UserArray2(5) <> "" Then CmdAddUsers.Fields("Password") = UserArray2(5)

to

 If UserArray2(5) <> "" Then CmdAddUsers.Fields("Password") = RC4(UserArray2(5), PasswordEncryptionKey)

that way it should convert your clear text passwords to encrypted while it does the import

this post also addresses this but in the reverse scenario
http://support.cjwsoft.com/code/code_info.asp?TID=261&PN =1&TPN=1

I hope this helps you because I really do have to leave the office like right now. Very late for a dinner meeting.

I should be back on the computer later tonight or tommoro morning

On second thought guys, it would must easier to change the code using modulus as follows:

<% If PicIndex mod 6 = 0 THEN %> 
      </tr>    
      <tr>
<% End If %>

This will end each row and create a new row after each 6th picture. It'll be must easier code to work with and change.  This code must be placed in the PicIndex For Loop.

If you have any questions, JPortnoy@Checkernet.com

You really should just look at the documentation that came with the application. It tells you everything you need to know.

it is in the docs folder in html format.. it is also linked to from the aspclassifieds website

http://www.aspclassifieds.com/demo/docs/