After taking another look at this and trying your suggestions without success, it appears that in Windows 2003 server it is nearly impossible to remove the READ ONLY attribute from the _database folder.  I'm wonder if this could the cause?

Thanks 

Adding Support For ServerObjects ASPMail

ASPProtect as you know does not support ServerObjects ASPMail component by default.

Here are directions to make it work.

In the ASPProtect admin settings area simply pretend as if you are using the softartisans sasmtp mailer component. ASPMail and that sasmtp component share the same properties… and the code used for them is nearly identical.

So search through the code for any place where email is sent and simply change

Set Mailer = Server.CreateObject("SoftArtisans.SMTPMail")

To

Set Mailer = Server.CreateObject("SMTPsvg.Mailer")

It is about 4 places. They are not too hard to find.

That’s the easy way to get all the emailing functions working with ASPMail

1st off.. you appear to have some strange things going on with that domain. Looks like you have a frameset and are loading another domain in it which is always confuding especially if you are running the site off your home computer or something... I am not sure

That aside..

If I go to

http://www.bones.myftpsite.net/rfamilystuff/default.asp

and click on the "familiy" category

then right click on a broken image.. look at properties

Your linking the image to your localhost

see

http://localhost/rfamilystuff/pictures/Pic_3_1_thumb.jpg

and that is wrong, just like I said above

Nobody running the site off any computer but your development machine is going to see those pictures because the url isnt valid for them

My guess is in the settings you have the "PictureURL" set to

http://localhost/rfamilystuff/pictures

when it should be

http://www.bones.myftpsite.net/rfamilystuff/pictures


Good luck with this.. I am going to the bar.
If you need more help I probably will not be available until Monday.

In addition to that I just noticed the </href> you have in there.. man that is some scary stuff you came up with.. that may appear to work and make a link but it is not correct. Each link will work but never truly be closed.

That is just not valid proper use of the anchor tag.
You make a link in html like so

<a href = "somepage.htm">somepage.htm</a>
http://www.w3schools.com/tags/tag_a.asp

Then your surrounding each link with <span lang="en-us"> </span>
Not sure why ?

ya,

any variation of a site url is going to have its own set of application and session variables.. soy you have to be consistant with your navigation links

example (for anyone that comes across this thread)

http://www.examplesite.com/somepage.asp

is going to have a different set of application and session variables then

http://examplesite.com/somepage.asp

even though they are basically the same page

Is it possible to set the user account time limits when they register? I am using email verification and am trying to have their accout expire 32 days after their initial login.

Also I have an issue with the email notification not notifying me when a new user logs in. It does a beautiful job notifying the new user.  I do not understand why my server will send to one and not the other, I ahve searched the links but none seem to answer this.

Thank you for your help and insight

i've got a client who has handed me a 151 character banner URL, and i see that the database is designed to take 150 characters. i took the obvious step of just increasing the size of that text field in the database, but i still get this error when i try to enter the URL in the proper form field:

Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.

/banners/aspbanner/save_banner.asp, line 200

now, line 200 is just this:

If Banner_Link_URL = "" THEN
 CmdEditBanner.Fields("Banner_Link_URL") = NULL
Else
 CmdEditBanner.Fields("Banner_Link_URL") = Banner_Link_URL
End If

which tells me that something is blocking the assignment of that long value to that field, even though i believed i had extended the length of that field in the source database.

where else might i look?

humm, I dont know then..

If you want PM me your site info and I will go in and troubleshoot.

Frontpage or frontpage access, either way

and also the site URL

sure, there are reasons AOL would block the email.. it might think it is spam or it might not like the fact that fact that a cdonts generated email has no MX records because it can not..

for more on MX records read my CDOSYS article
http://www.powerasp.com/content/new/sending_email_cdosys.asp


as far as the emails not being sent because notifications are off. I was not aware of that and will try to look into it.. Version 6 is no longer worked on but if I can find the time I will check that out

Turn off "Show Friendly HTTP error messages"
If you are getting errors with your ASP application go to Internet Explorer and make sure this setting is unchecked. Having this checked can cause a generic error to be displayed in you web browser when ASP code encounters an error. This generic error message doesn't really help you fix the problem. Having this setting unchecked will usually result in a more detailed error message and the line number the error is occurring at, thus giving you a good clue as to where the problem is within the ASP code. If detailed ASP error messages have been disabled at the server level this setting will make no difference.

Hi,

I only just purchased the product and I would be very keen to

a) is the upgrade available very soon as I don't want to spend the time developing one and than find the other released shortly & 

b) would I only need to pay the difference for the upgrade or have I already downloaded the upgrade already.

I cant see what version I current have.

I look forward to your response.

look in the "check_user_inc.asp" file

Thank you that did it !!

Chris -

Sorry, I am looking at your code on view_item.asp and I have noticed that you are calling 3 variable; start_date, end_date, and image_url that do not exist in the databases that you provided.  Do I have the updated package for ASPVendor?

Hello,

Sorry, I do not have any good ideas on this one...
Domain Name Masking can cause issues with quite a few things.

I dont understand why I would get an error? -- I'm not sending the email from internal - so why would it try to validate?

I'm trying to send an email to an independent place - just like I would send an email to you

Am I using the wrong email setting - should I be doing something other than using "remote server"

Chris,

2Checkout.com has added to their required cart parameters:

https://www.2checkout.com/documentation/newparameters.html

Do you have a version of 2checkout2.asp that will support these?

Thanks,

Nick

Yes, as long as each installation is in in it's own web site.
(or at least in it's own application in IIS)
Meaning you could have 5 directories in your site each with the app installed as long as each directory got set as an application in IIS.

Remember, a license must purchased for each running install except for development reasons on local machines.

like I said you made changes to something to cause that...

users/user_area.asp

runs fine the way it ships "it is one of things I tested earlier when I looked at your installation for you"

If you want I'll go look via FTP and tell you what is wrong

If a picture does not show after uploading it is one of the following things.

The upload method chosen is not supported on the server
or
The physical path specified to the pictures folder is not correct.
or
The URL to the Pictures folder is not correct.
or
Permissions to the pictures folder have not been set properly


Here is more information on how permissions are set.

http://support.cjwsoft.com/code/moreinfo136-1.htm
http://support.cjwsoft.com/code/moreinfo56-1.htm

Without more information and the settings you have entered and chosen that is all I can offer for now.

Hi,

The source code comes with it.
They are the.vb files.

I don't give out any project files for reasons stated in the article below.

Please read this in full if you want to edit the application in Visual Studio.NET

http://support.cjwsoft.com/code/moreinfo85-1.htm

I checked through the code and could not find anything as well. 

However, I do think it may be related somehow to the code as I get the messages popping up in the error log only after I have edited a banner.

If there is nothing obvious, I may just set my error log to filter and automatically delete this type of error.  Not something I prefer to do.

Thanks for the quick response.

Otherwise the program is working very well and I'm happy with it.

Permissions and Folder Locations

By default and to keep things clean we store everything in folder called "data"

That folder then has it in 4 sub folders

database (where the .mdb and temporary .ldb files are handled)
export (where the aspprotect export files are saved)
logfiles (where the aspprotect logfiles are saved)
user_pics (where the user pictures are saved)

Doing it this way makes it very easy for a system administrator to right click on one folder and set permissions for that folder and all of it's child folders.

Now, that being said.. you do not have to use these folders.

For example if you already have a folder in your web with modify permissions for the anonymous webserver account then you can use that one folder to store all of the 4 things above.

You'd simply edit your data connection string to point to that folder and then edit the other paths in the settings area of ASPProtect.

We did it that way so you would have options in case your hosting company was being difficult with your ASP hosting needs.

trust me, they (serverobjects) do not check processors.. as a matter of fact they haven't answered support emails for about 3 years. All they do is sell those components like hotcakes and take in mad crazy cash. But I will say the stuff does work well and always has. (that guy probably took all the money he made/makes from those components and took off to Jamaica or something sitting on the beach drinking margaritas)

regardless,
ASP just cant resize pictures on it's own.
It' just not possible. You need a 3rd Party component.

There isn't much to say about the ASP.NET thing.

If your server has ASP.NET installed (meaning you can run aspx pages on your server and the ASP.NET framework is installed) and running you just pick that option in the config file and ASP Photo Gallery will use ASP.NET to make dynamic thumbnails for you.

To run ASP.NET it must be a 2000 or 2003 server.

MSACCESS 2000

server: windows

option pack: yes (after the install I have this problems with groups and edit users )

host permissions: yes

MESSAGGE:
Active Server Pages error 'ASP0113' Script time out/password_admin/groups.asp The maximum amount of the time for a script to execute was exceeded. ...

I was able to get it all figured out.  Thanks a lot for your help, I really appreciate it.  I ended up copying the database with the password to the directory and used the user/password connection code and it works great.  I believe it was related to that but I cannot be sure.  Thanks again!

I appreciate the offer to beta test... but its really more a matter of me getting it ready..

I have a lot done.. but a lot of things are hard coded to only work on my machine and some things have not been sorted out. Giving it to someone else to test would be a waste of time at this point as I they probably couldn’t even run it.

Lately the reason this project has fallen behind has all to do with my main webserver where I collocate.

1st it got compromised (we think by certain competitors who are always up to no good)... then windows 2003 server which I decided to go with on the new server gave me random problems... then the Cisco hardware firewall was acting up and making the sites run slow....then SQL server attacks on port 1433 from Korea when I took the firewall down....and as of the last few days I think the server just needs a new power supply. I swear for the last 2 months I have spent more time administrating my servers than working on code. Yesterday it was locking up every 30 minutes. There have been a lot of days like that and it takes up all my time until I get it situated.  Especially since its over 100 miles to the collocation center. The APC unit I installed that allows me to remotely cut the power to hard reboot is a life saver.

Fun... I tell ya... and expensive.. (hardware, software, lost sales, and time) I am pretty much completely broke at the moment. It has been a very expensive few months.

But I like running my own servers... I run dns servers, email servers, sql servers, web servers.. I do it all. It's keeps me in touch with the latest software/hardware. Regardless , my servers ran well for years and they will again.


anyway.. hopefully I can actually get a new version of the photo gallery out before the month is over. It will probably be the last classic asp version. The version after that will most likely be ASP.net.

all I can say is try other things...  like

mail.yoursite.com

or

smtp.yoursite.com

etc etc etc

replacing yoursite with the name of your domain of course


the settings for sending email via ASP are no different then the settings you would use in outlook or something... except sometimes on the server level localhost works as the email server because they set it up to allow that

and of course those 3rd party emailing components need to actually be installed on the server