ok... lets forget about all this redirecting business for a minute

when I go to "GP01.asp" directly via your web site I get a big nasty error that says this

Microsoft VBScript compilation error '800a0411'

Name redefined

/protect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^ 

then when I look at what you did in that file I see why

you have this code which is totally wrong because you cannot include the password protection file twice

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<% GROUPACCESS = "*1*" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

it should be

<%@ LANGUAGE="VBSCRIPT" %>

<% GROUPACCESS = "*1*" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

and that is probably the root of this entire problem.. the redirection was working...
but you were sending them to invalid pages with errors

all those pages are wrong...

if you dont see the real error above see this

http://support.cjwsoft.com/code/moreinfo11-1.htm

if you look over the aspprotect 7 installation instructions that is the very 1st thing I tell people to do

hopefully this is the info you need to continue and get some work done

If you can would you do it for a price as a mod or will this be added to the new version.

Thank you so so much! I went to the admin area and changed the email component from CDOSYS (using remote server) to CDOSYS (using port 25 forwarding) and all is working great now!

Again, thanks!

Our webhost set the permissions, but the error is still there, so that is obviously not the problem.  We now have both our webhost and our asp support technician trying to figure out the problem and everyone is stumped.  Can you please provide us with the following information to help us out:

1) what is the name of the file that sets the connection string?

2) what is the name of the file, if it is different from above, that sets the password of the database?

thanks

I am testing this now and there is something wrong.

PayPal is hitting the ipn.asp but the database is not being updated.

I will figure it out shortly though and post the anwer here.

Not really sure how to do this.... i think you know what i am looking to do.. is there anyway you can show me or create that solution for me? It would prob. take you minutes as its been taking me hours

can add photo album but after i upload a pic, nothing shows.

where do i look to research why pics aren't showing in the albums

The setting I am most interested in is what you have for the "Pic_Max_Image_Width" used when the image resizing components resize the big image

setting it to nothing or zero could cause this

The default database password is "temp"

This is noted in the docs. You can also see the current password by looking at your connection string.

also.. the log out page shouldnt really need this
but you can try adding this to it where all the other ones are set to nothing..

<% Session("Groups") = "" %>

The only major usability issue I've found to date is multi-zone banners. Cloning is helpful to a point, but then if you have a change to that banner, you have to make the change 6 times or what have you. I think, even at the expense of speed, multi-zone capability for a single banner would be excellent addition. Of course, that supposes I haven't just missed it and it's already there.

Is this the full version 7.
Did you make any changes to the code ?
Is the User_ID field still an autonumber field in the Access database ?

I do not see how this could happen unless somehow the autonumber field setting for User_ID was changed in the database?

I think I've found the problem..

The password "abcdefgh" works

The password "abcdefghi" does not

(username "ace45")

Passwords can obviously only contain up to and including 8 characters... By some coincidence I only used short passwords with MS Access.

yeah.. I cant say for sure.. as I have never really tried to get it working in xp pro.

Last time I actually used cdonts locally was on a 2000 box

I would do a google search on xp pro, smtp service, and cdonts and let us know what you find out.

All of our apps can use free 3rd part emailing components as well so maybe try some of those. Course you need a valid email server to connect to.

Microsoft VBScript compilation error '800a0400'

Expected statement

D:\CLIENTS\RKLARMAN\DRSWEISBERG\PASSWORD_ADMIN\../dataconn_i nc.asp, line 18

<%
^

Hi,

The source code comes with it.
They are the.vb files.

I don't give out any project files for reasons stated in the article below.

Please read this in full if you want to edit the application in Visual Studio.NET

http://support.cjwsoft.com/code/moreinfo85-1.htm

all that docmunetation is online as well right here so you dont really need the chm file
http://support.cjwsoft.com/code/info24.htm

the chm format is a windows format that can only be viewed on windows pcs. I do not know why you can not see it. I would do reseach on viewing CHM files on whatever operating system and version you are running because perhaps you are using a mac or linux operating system which can not natively view chm files ?

ok, 1st we need to rule out the #1 reason people sometimes think that is not working.

Is is set up never to allow the same IP to increment the count more than once in a row so when testing it is real easy to think the count isn't working because unless you can change your ip you can not increment the count more than once per album

It's a poor mans spam abuse type of deal..
For the most part it will keep some Joker from hitting refresh 100 times and inflating the count of an album.

Do you think that is possible what is happening ?

Also, here is an older thread about the same issue?
http://support.cjwsoft.com/code/moreinfo54-2.htm

Editing using Visual Studio.NET

Here are directions for editing the application using Visual Studio.NET
2002 or 2003 version.. either should work

Some of you are wondering why I didnt just give you the project files.
It is best you go through this process and really understand what is going on.
Also, I dont use VS 2002 so I wouldnt be able to give you project files that would work with that. Not to mention there is 100% chance my prject files wouldn't work for you anyway because of path differences and other things.


Anyway.. on with the instructions...

1st.. make sure IIS, ASP.NET, .NET Framework, and Visual Studio.NET are all installed correctly and up to date.

Open Visual Studio.NET

File -  New Project

Select a New Visual Basic ASP.NET web application.

give the new web to be created a name.. I called mine "aspprotectdotnet"

Hit Ok..

Now. once the project opens up we need to delete a few things in the solution explorer window.

So delete "webform1.aspx" , "deletestyles.css", "Global.asax", "AssemblyInfo.vb", and "web.config"

Basically all the files under the project...

Now... you should have the aspprotect.net files unzipped somewhere on you hard drive...

open that folder and select all the files and folders like so




Now drag those selected files and folders to the solution explorer window of Visual Studio.NET right on to the name of the web. In my case "aspprotectdotnet"

It might say this folder already contains a folder names Bins.. just tell it to copy over and continue on any prompts like that.

You'll notice your project is now populated.

Open up the references tab in the solution explorer window as we need to add some references to the dlls in the bin folder of this project. This is needed so the compile process and function correctly.

Right click on references.. click add reference
Then browse....browse on your hard drive to the location of the new web and the bin folder within it. 

In my case... "C:\Inetpub\wwwroot\aspprotectnet\bin"

Choose "aspprotectlicense.dll"

Hit open...

Now do the same thing again until you have added all the dlls in that bin folder to the references.. 

Now.. click add-references again and this time choose
"system.management" from the choices in the .NET tab

Once all of that is done your references should look like this




Now in the Visual Studio.NET menu system up top..

Choose Build - Build Solution

If you did everything right you will see something like this in the build window

------ Build started: Project: aspprotectdotnet, Configuration: Debug .NET ------

That would be great.

I am sure you know that many virus that are sent via email have the same property. (double extension). The code can be executed even though Windows identifies them as simple text files etc.

Thanks again

Dear Christofer

I already have send you the details you asked me for. Please let me know if you have received

Sounds great, Sold!

Thanks Christopher!

Sorry you feel that way, not my intention. I'm not threatening anything. I was very happy you responded when did so there no reason for any bad feelings. I like your product as I said before and have no problems with it. Sorry again, that was not my intention. Merry Christmas…

Hello:

When using the Mass Mail feature and selecting the Users to ‘Active’ and the Access Level I want to send to the system will still send e-mails to the ‘Inactive’ users from the same Access Level.

In other words it sends to everyone in the Access Level regardless if you choose “Active” only.

Any ideas to correct?

Thanks,

-Ricardo

Ahhh....yes, I always forget about the cache.  That's exactly what it was. 

 I had made modifications to the import_pics.asp file, because I added more fields to the db, and made the import folder path dynamic, but I seem to have forgotten to add in the response.expires=0

Once I added this back in it has stopped messing up.

What was happening was, it wasn't overwriting the files, nor were they too big, but you would click on one thumbnail in an album(category) and it would display a picture from a totally different category.  It seems browser cache was the culprit, however.

Thanks for the quick reply, great product tooo!!!