I am not entirely sure how one configures the system to assign a user to a specific group.  For example, let say I have created two groups A and B, and I have pages protected by the code generated in the admin area for groups A and B.  I know I can assign access to these groups in the admin area.  However,  it is not clear to me how I do it automatically through the registration process. 

ASPProtect v7.x has a new feature called groups.

Groups are meant as a replacement for using the access levels as they are much more powerful. Support for pages protected using access levels is left in tact for backward compatiability for a customer that was using them.

A customer recently told me groups could not be used like access levels and that 8 access levels was not enough. This is how I explained that groups can do everything access levels can do.



Groups can honestly do everything access levels can do if you really think about it.
Using groups and protecting pages accordingly you could actually create a system that basically worked identically to the way the access levels works.

For example..

You make 8 groups and assign users to them accordingly

Protection code on page allows access to groups 1-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "1,2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any one of those groups would have access..

Protection code on page allows access to groups 2-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  2-8 would have access..

Protection code on page allows access to groups 3-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  3-8 would have access..

and so on... I think you should get the picture by now

One last thing..

This is bad

http://www.bones.myftpsite.net/rfamilystuff/pictures/

there are .asp files in there people can run that you dont want people running..

u should delete the asp files in there or turn off directory listing...

take care,

CJW

That carrot doesn't really exist in the file, so I'm not sure.

I did download and place the ASPTEST file in www.drsweisberg.com/asptest and when I try to load the 2 pages it fails to load.  I have another site on the same server and I uploaded the same exact set of files and the asp pages load.  www.klarman.com/asptest

http://www.drsweisberg.com/asptest/server_info.asp

http://www.klarman.com/asptest/server_info.asp

This is how I set the connection:

ConnectionString = "DBQ=D:\clients\rklarman\klarman\asptest\_database\asptest.m db;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

ConnectionString = "DBQ=D:\clients\rklarman\drsweisberg\asptest\_database\aspte st.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

yea.. it sounds like aspimage is not working right.

You wont get any errors..

I would suggest using some of aspimage's sample asp pages in your web and see if they do their thing. You need to be sure aspimage is working correctly under the ,ost simple of circumstances

Though ASPImage is the standard in ASP image resizing and has been around forever and it works very well. Their support is almost non-existant.. in 6 years they have never answered any email I have sent them. I have sent them 6 or so over the years and then just stopped trying. I bought a server bundle too way back then for like 300.00 or so when we had a company called gisco. You would think they could answer my emails. I think that guy just made a ton of asp components back in the day and then just took a seriously long vacation. Updated them a few times in between when he felt like it and making good money the whole time.. More power too him I guess. I'd love to be in his shoes when he sells an enterprise license for 3000.00. Maybe he isn't even around anymore and the someone he knows just kept the sales going. Who knows..

Anyway... it does a great job when ya get it working.

Personally this is how I install it and it works every time.
I like to put their dll in the system32 folder.
Register it.
Run their licensing prog to make it a full version if you paid for it yet.
Right click on the dll and give the "everyone" account modify permissions
Right click on the "windows/temp" folder and give it the same permissions

Not sure because of the nature of the javascript method

for starters tighten up the html around the banner call

change

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<!------- ASPBanner Ad code ------------->
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >

</td>

to

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >
</td>

If that doesn't help I would suggest using the ASP 3.0 version of ASPBanner. It can serve banners to a any type of page extension and it runs just as well as the .NET version. There is a new iframe method for calling banners that you can try instead of the javascript. The iframe method is explained in the ASPBanner Unlimited section of the forum.

IFRAME is just an client side html thing...

has nothing to do with .NET

will work with any page extension or server side technology

As you see from that compatibilty chart I posted a link to.
Nearly every modern browser supports it.

Christopher,

Thanks for the reply. I think I've found my problem, but can't test until later in the evening as it is on a live site.

Darrell

I set the max image width to 1000; previously it was null. Now I'm getting server errors:

page not found, then, service unavailable (the page is there). But in a new album, the images imported fine and it seems to be working now, despite the IIS issues.

I think my host restricted the amount of memory and resources my site is allowed to use.

Below is the email I received when testing the self-registration. Does anyone know what setting I configured incorrectly?

I received the email to confirm the registration but the link to activate is invalied.

Thanks!

Your registration still has to be validated.
Go to
?u=bubbaj&v=4579
to verify your registration.

This server is sitting in my den on a DSL circuit, so I don't have a hosting company. The install for Windows 2000 server is with default settings for all components installed.

I am not sure what you are referring to when you say:

"Does emailing work under the simplest scenario ? (directly from the users screen"

What user screen?

What settings are you referring to that I may have chosen?

After I approve someone's username and password, then go to send them the default e mail telling them of the approval, the e mail never goes through.  The e mailing used to work well for many months, but it stopped working.  Any thoughts?

Spider

Hey, I run a business and I will not have things like that mentioned in these forums.

Its not on their end. Using ASP alone you really won't be able to send more than around 300-400 individuals emails at a time before things will time out. Its just that ASP is not an efficient way of sending email and it never will be.

You really should look into worldcast like I mentioned before.
http://www.fairlogic.com/worldcast/

Then just export the email list from the database into worldcast and send out the newsletters.

You will get much better results and perfect newsletters and it really only takes a little bit longer to do each time once you figure it out. That is how I send out my PowerASP and CJWSoft newsletters and it works perfectly every time.

More Info in Case Anyone is Interested:

This bug was mentioned by a couple people. The cause of it was never really understood until I recently re-wrote some of the banner code for an upcoming version.

The fix for this bug was very simple. It was just one of those weird situations where code should have worked but did not. I added some code to do it a bit differently and it worked as it should have..

It really still makes no sense to me why it didnt work the way it was, but at least there is a fix.

Sorry, there is no option for that.

I'll take it into consideration, but the way the banner rotation logic works would make adding such an option very complicated.

Just give it  an expiration date way into the future if you do not want an ad to expire anytime soon.

I usually just make all my ads expire in like 2020 or something like that since I don't want them to stop running either on some of my sites.

It's just a generic error that means one of 1000 different things is wrong.. there is a lot of information on in in these forums as well as links to articles about it.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=27& PN=1

usually it means permissions to the database folder are incorrect or the physical path you are specifying for your dsn-less connection is invalid..

everything has to be perfect

Hi Chris,

Our company has a big dilemma on how to manage the database for accounts that are expiring/expired.

We saw the function to email a batch of users who are expiring soon but this doesn't help us to complete the renewal process.

Once the email is sent, what happens afterwards? how can we setup the system so that we can renew their expiry dates or accounts without too much hassle?

The system currently doesn't have any renewal functions or to allow batch changes on multiple accounts at the same time so we have to manually edit one account at a time. This is extremely tedious if we have over 1000 accounts to manage (and we will).

If you have anything to suggest on all this I would appreciate it :)

Thanks alot
Sylvain

It should be released sometime late May 2004 or early June 2004 but no gurantees as I am pretty busy right now with some projects.

There will be upgrade instructions and it should be a fairly easy upgrade.

right..

I had to open up the permissions to get it to work.  I now have to go back and uncheck each one for directory listing.. :)

here ya go

http://support.cjwsoft.com/code/moreinfo169-1.htm

I'm getting this error when I try to login:

 Active Server Pages error 'ASP 0131'

Disallowed Parent Path

/gallery/users/login.asp, line 19

The Include file '..dataconn_inc.asp' cannot contain '..' to indicate the parent directory.

it is not uncommon for folder permissions to be lost or changed on a server.. a lot of things can cause it

if it was working and now you can not edit or write new data to the database it is most likely permissions

I would triple check permissions... see my articles if there is any doubt on how permissions are set

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

Your SQL statement to the database is the key.

You want to change the sortby hyperlink on that page so that it will in turn change the dynamic sql statement to sort the way you want

Find

?SORTBY=Date_Created

change it to

?SORTBY=Date_Created+ASC

or maybe

?SORTBY=Date_Created+DESC

One of them is the default anyway, but I cant remember which is which off hand so just try them both till you get the desired result

near the top you can also change the default sortby when thet page is loaded

SORTBY = Request("SORTBY")
If SORTBY = "" Then
 SORTBY = "Name"
End If

there you would use a space though.. not a "+" sign when adding the ASC or DESC

The + sign is only used in the hyperlinks because it means a space for browsers that can't deal with spaces in links

Same here.  Thinking it might be server load or the bandwidth to the server.

Thanks for checking!
Lance